← Commit history
package.json+135−4@@ -1,6 +1,6 @@ { "slug": "oc5800l",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OCX DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,137 @@ "docs/hero.png", "docs/oc5800l-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "oc5800l-etched.step",+ "oc5800l-etched.glb"+ ],+ "component": {+ "mpn": "OC5800L",+ "manufacturer": "OCX",+ "package": "SOP-8",+ "pin_count": 9,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "oc5800l.kicad_sym",+ "footprint": "oc5800l.kicad_mod",+ "model_3d": "oc5800l-etched.glb",+ "model_3d_plain": "oc5800l.glb",+ "model_3d_step": "oc5800l-etched.step",+ "model_3d_step_plain": "oc5800l.step",+ "lbr": "oc5800l.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Drain of the internal 100V/5A power MOSFET; connect to the input power supply (8V-90V, absolute max 100V). The exposed thermal pad is internally tied to this pin."+ },+ {+ "number": "2",+ "name": "VDD",+ "type": "power_in",+ "description": "Chip bias supply input. Internally clamped at ~33V (I_VDD < 10mA); UVLO rising threshold 4.5V, falling 3V. Typically fed from VIN through a series resistor and a 12V Zener clamp."+ },+ {+ "number": "3",+ "name": "FB1",+ "type": "input",+ "description": "Positive-side output-voltage feedback sense pin. With FB2 forms the CV feedback loop; regulated (FB1-FB2) differential voltage is typically 397 mV. Absolute max -0.3 to 6 V."+ },+ {+ "number": "4",+ "name": "FB2",+ "type": "input",+ "description": "Negative-side output-voltage feedback sense pin. Paired with FB1 in the resistor-divider network that sets VOUT = ((R3+R1)/R1)*VFB. Absolute max -0.3 to 6 V."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal 5V LDO output (typ. 5.5 V); connect a decoupling capacitor (typ. 4.7 µF) to GND. Absolute max -0.3 to 6 V; not intended to drive external loads."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Chip ground reference for all internal circuitry and feedback resistor networks."+ },+ {+ "number": "7",+ "name": "VSEN",+ "type": "input",+ "description": "Inductor current sense input. A sense resistor between VSEN and GND sets the maximum output current: IOUT_MAX = VCS/R5, where VCS typ. 150 mV (145-155 mV). Also used for cycle-by-cycle current limit (VCS_LMT ≈ 300 mV). Absolute max -0.3 to 6 V."+ },+ {+ "number": "8",+ "name": "VSEND",+ "type": "output",+ "description": "Source of the internal power MOSFET (switch node). Connects to the external freewheeling Schottky (e.g. SS510) and to the buck inductor. Absolute max -0.3 to 6 V referenced per datasheet (see notes)."+ },+ {+ "number": "EP",+ "name": "EP/Thermal Pad",+ "type": "power_in",+ "description": "Exposed thermal pad on the bottom of the ESOP-8 package. Internally connected to VIN (pin 1); solder to the VIN copper plane for heat dissipation. Package max dissipation P_ESOP8 = 1 W.",+ "thermal_pad": true+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "oc5800l.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "oc5800l-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "57fd9a15f535488f62aa72e6323f15ee6c327682dbfb60f397de87614fe7d5b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "oc5800l",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OCX DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/oc5800l-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "oc5800l-etched.step"+ "oc5800l-etched.step",+ "oc5800l-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -160,5 +159,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}