main
Ray Publish 0.1.1 8de37dc
{
  "slug": "oc5800l",
  "version": "0.1.1",
  "type": "component",
  "description": "OCX DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "oc5800l"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "oc5800l.kicad_sym",
    "oc5800l.kicad_mod",
    "oc5800l.glb",
    "oc5800l.step",
    "oc5800l.lbr",
    "docs/hero.png",
    "docs/oc5800l-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "oc5800l-etched.step",
    "oc5800l-etched.glb"
  ],
  "component": {
    "mpn": "OC5800L",
    "manufacturer": "OCX",
    "package": "SOP-8",
    "pin_count": 9,
    "category": "DC-DC Converters",
    "parts": {
      "symbol": "oc5800l.kicad_sym",
      "footprint": "oc5800l.kicad_mod",
      "model_3d": "oc5800l-etched.glb",
      "model_3d_plain": "oc5800l.glb",
      "model_3d_step": "oc5800l-etched.step",
      "model_3d_step_plain": "oc5800l.step",
      "lbr": "oc5800l.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Drain of the internal 100V/5A power MOSFET; connect to the input power supply (8V-90V, absolute max 100V). The exposed thermal pad is internally tied to this pin."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "Chip bias supply input. Internally clamped at ~33V (I_VDD < 10mA); UVLO rising threshold 4.5V, falling 3V. Typically fed from VIN through a series resistor and a 12V Zener clamp."
      },
      {
        "number": "3",
        "name": "FB1",
        "type": "input",
        "description": "Positive-side output-voltage feedback sense pin. With FB2 forms the CV feedback loop; regulated (FB1-FB2) differential voltage is typically 397 mV. Absolute max -0.3 to 6 V."
      },
      {
        "number": "4",
        "name": "FB2",
        "type": "input",
        "description": "Negative-side output-voltage feedback sense pin. Paired with FB1 in the resistor-divider network that sets VOUT = ((R3+R1)/R1)*VFB. Absolute max -0.3 to 6 V."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal 5V LDO output (typ. 5.5 V); connect a decoupling capacitor (typ. 4.7 µF) to GND. Absolute max -0.3 to 6 V; not intended to drive external loads."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground reference for all internal circuitry and feedback resistor networks."
      },
      {
        "number": "7",
        "name": "VSEN",
        "type": "input",
        "description": "Inductor current sense input. A sense resistor between VSEN and GND sets the maximum output current: IOUT_MAX = VCS/R5, where VCS typ. 150 mV (145-155 mV). Also used for cycle-by-cycle current limit (VCS_LMT ≈ 300 mV). Absolute max -0.3 to 6 V."
      },
      {
        "number": "8",
        "name": "VSEND",
        "type": "output",
        "description": "Source of the internal power MOSFET (switch node). Connects to the external freewheeling Schottky (e.g. SS510) and to the buck inductor. Absolute max -0.3 to 6 V referenced per datasheet (see notes)."
      },
      {
        "number": "EP",
        "name": "EP/Thermal Pad",
        "type": "power_in",
        "description": "Exposed thermal pad on the bottom of the ESOP-8 package. Internally connected to VIN (pin 1); solder to the VIN copper plane for heat dissipation. Package max dissipation P_ESOP8 = 1 W.",
        "thermal_pad": true
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "oc5800l.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "oc5800l-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "57fd9a15f535488f62aa72e6323f15ee6c327682dbfb60f397de87614fe7d5b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}