main
Ray Publish 0.1.2 8aba0a9

NCV6324BMTAATBG

onsemi · DC-DC Converters · DFN-8-EP(2x2)

NCV6324BMTAATBG from onsemi, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 PGND power_in Power ground for the power and analog blocks; must be connected to the system ground.
2 SW output Switch pin that connects the power transistors to one end of the inductor.
3 AGND power_in Analog ground for the analog and digital blocks; must be connected to the system ground.
4 FB input Feedback voltage from the buck output into the error amplifier (internal reference 0.6 V), taken from a resistor divider between VOUT and AGND.
5 EN input Enable input: a level above 1.1 V enables the device and a level below 0.4 V disables it into shutdown.
6 PG/MODE output On the NCx6324B this is an open-drain power good output (low = not in power good, high impedance = power good; may be left unconnected when unused); on the NCx6324C it is a MODE input (above 1.1 V forces forced PWM, below 0.4 V enables automatic PFM/PWM).
7 AVIN input Analog and digital supply input, 2.5 V to 5.5 V, bypassed to ground with an optional ceramic capacitor of 1 µF or larger placed close to the pin.
8 PVIN power_in Power supply input, 2.5 V to 5.5 V, bypassed to ground with a ceramic capacitor of 10 µF or larger placed as close as possible to the pin.
9 PAD passive Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance; the datasheet also states it is internally unconnected.

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-8-EP(2x2)
Category Power Management ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Pins DC non switching: AVIN, PG, FB, EN VA-DC -0.3 6 V DC non switching 4
Power Pins DC non switching: PVIN, SW VP-DC -0.3 6 V DC non switching 4
Between PVIN, PGND pins, transient VP-TR -0.3 7.5 V 3 ns to 3 MHz 4
Latchup Current ILU -100 100 mA JESD78 Class II (Note 3) 4
Junction Temperature Range TJMAX -40 °C Note 4; max printed as TSD (thermal shutdown threshold) 4
Storage Temperature Range TSTG -55 150 °C 4
Analog Input Supply AVINR 2.5 5.5 V 4
Power Input Supply PVINR 2.5 5.5 V 4
Operating Junction Temperature Range TJ -40 125 °C Note 8 4
Inductor for DC to DC Converter LOUT 0.67 1 µH Including de-ratings (Note 9) 4
Output Capacitor COUT 7 10 µF Notes 9, 10 4
Input Capacitor for Power Supply CPVIN 7 10 µF Note 9 4
VIN Input Voltage Range VIN 2.5 5.5 V Note 14: at first power-up VIN must be > 2.6 V 5
VIN Shutdown Current ISD 1 µA EN low (Note 13 for NCP6324) 5
Output Voltage Range VOUT 0.6 V Note 11 (guaranteed by design); max printed as VIN 5
FB Voltage VFB 594 600 606 mV PWM Mode 5
Output Peak Current Limit P-Channel ILIMP 2.3 2.8 3.3 A P-Channel 5
VIN UVLO Falling Threshold VINUV- 2.4 V 5
VIN UVLO Hysteresis VINHYS 60 140 200 mV 5
Power Good Low Threshold VPGL 87 90 92 % VOUT falls to cross threshold, percentage of FB voltage (Note 12; NCx6324B only) 5
Power Good Hysteresis VPGHYS 0 5 7 % VOUT rises to cross threshold, percentage of VPGL voltage (Note 12) 5
Power Good Pin Low Voltage VPG_L 0.3 V 5 mA sink current (Note 12) 5
Power Good Pin Leakage Current PG_LK 100 nA 3.6 V at PG pin when power good valid (Note 12) 5
High-Side MOSFET ON Resistance RON_H 160 200 mΩ VIN = 3.6 V (Note 13 for NCP6324) 5
Low-Side MOSFET ON Resistance RON_L 110 140 mΩ VIN = 3.6 V (Note 13 for NCP6324) 5
Normal Operation Frequency FSW 2.7 3 3.3 MHz 6
Start Time TSTART 0 0.18 1 ms Time from EN to 90% of output voltage target 6
EN Input High Voltage VEN_H 1.1 V 6
EN Input Low Voltage VEN_L 0.4 V 6
EN Input Bias Current IEN_BIAS 1 µA 6
Internal Output Discharge Resistance R_DIS 75 500 700 Ω from SW to PGND 6
Junction-to-Top Case Thermal Resistance RJC 12 °C/W Note 5: NCP6324EVB board, 2-1 oz copper traces 4
Junction-to-Board Thermal Resistance RJB 30 °C/W Note 5: NCP6324EVB board 4
Junction-to-Ambient Thermal Resistance RJA 62 °C/W Note 5: NCP6324EVB board 4
Power Dissipation PD 1.6 W Note 6: depends on input voltage, output current and external components 4
Human Body Model ESD Rating ESD HBM 2000 V JESD22-A114 (Note 2) 4
Machine Model ESD Rating ESD MM 200 V JESD22-A115 (Note 2) 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: NCV6324BMTAATBG
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2), generated on the KiCad land (body 2 x 2 mm, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ncv6324bmtaatbg-etched.step / ncv6324bmtaatbg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv6324bmtaatbg.step / ncv6324bmtaatbg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (17 pp, sha256 7cfe5dbc68db3f02, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF