Generated by kicad-footprint-generator · KiCad file format 20260206
NCV6324BMTAATBG
onsemi · DC-DC Converters · DFN-8-EP(2x2)
NCV6324BMTAATBG from onsemi, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground for the power and analog blocks; must be connected to the system ground. |
| 2 | SW | output | Switch pin that connects the power transistors to one end of the inductor. |
| 3 | AGND | power_in | Analog ground for the analog and digital blocks; must be connected to the system ground. |
| 4 | FB | input | Feedback voltage from the buck output into the error amplifier (internal reference 0.6 V), taken from a resistor divider between VOUT and AGND. |
| 5 | EN | input | Enable input: a level above 1.1 V enables the device and a level below 0.4 V disables it into shutdown. |
| 6 | PG/MODE | output | On the NCx6324B this is an open-drain power good output (low = not in power good, high impedance = power good; may be left unconnected when unused); on the NCx6324C it is a MODE input (above 1.1 V forces forced PWM, below 0.4 V enables automatic PFM/PWM). |
| 7 | AVIN | input | Analog and digital supply input, 2.5 V to 5.5 V, bypassed to ground with an optional ceramic capacitor of 1 µF or larger placed close to the pin. |
| 8 | PVIN | power_in | Power supply input, 2.5 V to 5.5 V, bypassed to ground with a ceramic capacitor of 10 µF or larger placed as close as possible to the pin. |
| 9 | PAD | passive | Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance; the datasheet also states it is internally unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-8-EP(2x2) |
| Category | Power Management ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Pins DC non switching: AVIN, PG, FB, EN | VA-DC | -0.3 | 6 | V | DC non switching | 4 | |
| Power Pins DC non switching: PVIN, SW | VP-DC | -0.3 | 6 | V | DC non switching | 4 | |
| Between PVIN, PGND pins, transient | VP-TR | -0.3 | 7.5 | V | 3 ns to 3 MHz | 4 | |
| Latchup Current | ILU | -100 | 100 | mA | JESD78 Class II (Note 3) | 4 | |
| Junction Temperature Range | TJMAX | -40 | °C | Note 4; max printed as TSD (thermal shutdown threshold) | 4 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 4 | ||
| Analog Input Supply | AVINR | 2.5 | 5.5 | V | 4 | ||
| Power Input Supply | PVINR | 2.5 | 5.5 | V | 4 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Note 8 | 4 | |
| Inductor for DC to DC Converter | LOUT | 0.67 | 1 | µH | Including de-ratings (Note 9) | 4 | |
| Output Capacitor | COUT | 7 | 10 | µF | Notes 9, 10 | 4 | |
| Input Capacitor for Power Supply | CPVIN | 7 | 10 | µF | Note 9 | 4 | |
| VIN Input Voltage Range | VIN | 2.5 | 5.5 | V | Note 14: at first power-up VIN must be > 2.6 V | 5 | |
| VIN Shutdown Current | ISD | 1 | µA | EN low (Note 13 for NCP6324) | 5 | ||
| Output Voltage Range | VOUT | 0.6 | V | Note 11 (guaranteed by design); max printed as VIN | 5 | ||
| FB Voltage | VFB | 594 | 600 | 606 | mV | PWM Mode | 5 |
| Output Peak Current Limit P-Channel | ILIMP | 2.3 | 2.8 | 3.3 | A | P-Channel | 5 |
| VIN UVLO Falling Threshold | VINUV- | 2.4 | V | 5 | |||
| VIN UVLO Hysteresis | VINHYS | 60 | 140 | 200 | mV | 5 | |
| Power Good Low Threshold | VPGL | 87 | 90 | 92 | % | VOUT falls to cross threshold, percentage of FB voltage (Note 12; NCx6324B only) | 5 |
| Power Good Hysteresis | VPGHYS | 0 | 5 | 7 | % | VOUT rises to cross threshold, percentage of VPGL voltage (Note 12) | 5 |
| Power Good Pin Low Voltage | VPG_L | 0.3 | V | 5 mA sink current (Note 12) | 5 | ||
| Power Good Pin Leakage Current | PG_LK | 100 | nA | 3.6 V at PG pin when power good valid (Note 12) | 5 | ||
| High-Side MOSFET ON Resistance | RON_H | 160 | 200 | mΩ | VIN = 3.6 V (Note 13 for NCP6324) | 5 | |
| Low-Side MOSFET ON Resistance | RON_L | 110 | 140 | mΩ | VIN = 3.6 V (Note 13 for NCP6324) | 5 | |
| Normal Operation Frequency | FSW | 2.7 | 3 | 3.3 | MHz | 6 | |
| Start Time | TSTART | 0 | 0.18 | 1 | ms | Time from EN to 90% of output voltage target | 6 |
| EN Input High Voltage | VEN_H | 1.1 | V | 6 | |||
| EN Input Low Voltage | VEN_L | 0.4 | V | 6 | |||
| EN Input Bias Current | IEN_BIAS | 1 | µA | 6 | |||
| Internal Output Discharge Resistance | R_DIS | 75 | 500 | 700 | Ω | from SW to PGND | 6 |
| Junction-to-Top Case Thermal Resistance | RJC | 12 | °C/W | Note 5: NCP6324EVB board, 2-1 oz copper traces | 4 | ||
| Junction-to-Board Thermal Resistance | RJB | 30 | °C/W | Note 5: NCP6324EVB board | 4 | ||
| Junction-to-Ambient Thermal Resistance | RJA | 62 | °C/W | Note 5: NCP6324EVB board | 4 | ||
| Power Dissipation | PD | 1.6 | W | Note 6: depends on input voltage, output current and external components | 4 | ||
| Human Body Model ESD Rating | ESD HBM | 2000 | V | JESD22-A114 (Note 2) | 4 | ||
| Machine Model ESD Rating | ESD MM | 200 | V | JESD22-A115 (Note 2) | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
NCV6324BMTAATBG - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2), generated on the KiCad land (body 2 x 2 mm, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ncv6324bmtaatbg-etched.step/ncv6324bmtaatbg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv6324bmtaatbg.step/ncv6324bmtaatbg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
7cfe5dbc68db3f02, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).