← Commit history
README.md+46−42
@@ -8,15 +8,15 @@ NCV6324BMTAATBG from onsemi, in a DFN-8-EP(2x2). Pinout and pin descriptions ext  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | PGND | power_in | Power ground for the power and analog blocks, which must be connected to the system ground. |-| 2 | SW | power_out | Switch node that connects the power transistors to one end of the inductor; it is the output of the buck converter switching stage. |-| 3 | AGND | power_in | Analog and digital ground, which must be connected to the system ground. |-| 4 | FB | input | Feedback input to the error amplifier, connected to the resistor divider between VOUT and AGND; the internal reference is 0.6 V (VFB 594 to 606 mV in PWM mode). |+| 1 | PGND | power_in | Power ground for the power and analog blocks; must be connected to the system ground. |+| 2 | SW | output | Switch pin that connects the power transistors to one end of the inductor. |+| 3 | AGND | power_in | Analog ground for the analog and digital blocks; must be connected to the system ground. |+| 4 | FB | input | Feedback voltage from the buck output into the error amplifier (internal reference 0.6 V), taken from a resistor divider between VOUT and AGND. | | 5 | EN | input | Enable input: a level above 1.1 V enables the device and a level below 0.4 V disables it into shutdown. |-| 6 | PG/MODE | output | On the NCx6324B (this MPN) this is the open-drain Power Good output, low when the output is not in regulation and high-impedance when power good is valid; it can be left unconnected when unused, and its PG low level is at most 0.3 V at 5 mA sink. |-| 7 | AVIN | input | Analog and digital supply input that should be bypassed to ground with an optional 1 µF or larger ceramic capacitor placed as close as possible to the pin. |-| 8 | PVIN | power_in | Power supply input for the converter that must be bypassed to ground with a 10 µF or larger ceramic capacitor placed as close as possible to the pin; input range is 2.5 V to 5.5 V. |-| 9 | PAD | passive | Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance. |+| 6 | PG/MODE | output | On the NCx6324B this is an open-drain power good output (low = not in power good, high impedance = power good; may be left unconnected when unused); on the NCx6324C it is a MODE input (above 1.1 V forces forced PWM, below 0.4 V enables automatic PFM/PWM). |+| 7 | AVIN | input | Analog and digital supply input, 2.5 V to 5.5 V, bypassed to ground with an optional ceramic capacitor of 1 µF or larger placed close to the pin. |+| 8 | PVIN | power_in | Power supply input, 2.5 V to 5.5 V, bypassed to ground with a ceramic capacitor of 10 µF or larger placed as close as possible to the pin. |+| 9 | PAD | passive | Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance; the datasheet also states it is internally unconnected. |  ## Key specifications @@ -33,39 +33,43 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VIN Input Voltage VIN Range | VIN | 2.5 |  | 5.5 | V | VIN Range (Note 10) | 4 |-| VIN Shutdown Current | ISD |  |  | 1 | µA | EN low (Note 9 for NCP6324) | 4 |-| Output Voltage Range | VOUT | 0.6 |  |  | V | (Note 7) | 4 |-| FB Voltage | VFB | 594 | 600 | 606 | mV | PWM Mode | 4 |-| Output Current Capability | IOUTMAX | 2 |  |  | A | (Note 7) | 4 |-| Output Peak Current Limit P-Channel | ILIMP | 2.3 | 2.8 | 3.3 | A |  | 4 |-| VIN UVLO Falling Threshold | VINUV− |  |  | 2.4 | V |  | 4 |-| VIN UVLO Hysteresis | VINHYS | 60 | 140 | 200 | mV |  | 4 |-| Power Good Low Threshold | VPGL | 87 | 90 | 92 | % | VOUT falls down to cross the threshold (percentage of FB voltage) (Note 8) | 4 |-| Power Good Hysteresis | VPGHYS | 0 | 5 | 7 | % | VOUT rises up to cross the threshold (percentage of Power Good Low Threshold (VPGL) voltage) (Note 8) | 4 |-| Power Good Pin Low Voltage | VPG_L |  |  | 0.3 | V | Voltage at PG pin with 5 mA sink current (Note 8) | 4 |-| Power Good Pin Leakage Current | PG_LK |  |  | 100 | nA | 3.6 V at PG pin when power good valid (Note 8) | 4 |-| High-Side MOSFET ON Resistance | RON_H |  | 160 | 200 | mΩ | VIN = 3.6 V (Note 9 for NCP6324) | 4 |-| Low-Side MOSFET ON Resistance | RON_L |  | 110 | 140 | mΩ | VIN = 3.6 V (Note 9 for NCP6324) | 4 |-| Normal Operation Frequency | FSW | 2.7 | 3 | 3.3 | MHz |  | 5 |-| Start Time | TSTART | 0 | 0.18 | 1 | ms | Time from EN to 90% of output voltage target | 5 |-| EN Input High Voltage | VEN_H | 1.1 |  |  | V |  | 5 |-| EN Input Low Voltage | VEN_L |  |  | 0.4 | V |  | 5 |-| EN Input Bias Current | IEN_BIAS |  | 0.1 | 1 | µA |  | 5 |-| Internal Output Discharge Resistance from SW to PGND | R_DIS | 75 | 500 | 700 | Ω |  | 5 |-| Analog Pins DC non switching voltage | VA−DC | -0.3 |  | 6 | V | DC non switching: AVIN, PG, FB, EN | 3 |-| Power Pins DC non switching voltage | VP−DC | -0.3 |  | 6 | V | DC non switching: PVIN, SW | 3 |-| Transient voltage between PVIN and PGND | VP−TR | -0.3 |  | 7.5 | V | Between PVIN, PGND pins, transient 3 ns − 3 MHz | 3 |-| Human Body Model (HBM) ESD Rating | ESD HBM |  |  | 2000 | V | (Note 1) | 3 |-| Machine Model (MM) ESD Rating | ESD MM |  |  | 200 | V | (Note 1) | 3 |-| Latchup Current | ILU | -100 |  | 100 | mA | (Note 2) | 3 |-| Operating Junction Temperature Range | TJ | -40 |  | 125 | °C | (Note 3) | 3 |-| Operating Ambient Temperature Range (NCV6324) | TA | -40 |  | 125 | °C | NCV6324 | 3 |-| Storage Temperature Range | TSTG | -55 |  | 150 | °C |  | 3 |-| Thermal Resistance Junction-to-Top Case | RJC |  |  | 12 | °C/W | (Note 4) | 3 |-| Thermal Resistance Junction-to-Board | RJB |  |  | 30 | °C/W | (Note 4) | 3 |-| Thermal Resistance Junction-to-Ambient | RJA |  |  | 62 | °C/W | (Note 4) | 3 |-| Power Dissipation | PD |  |  | 1.6 | W | (Note 5) | 3 |+| Analog Pins DC non switching: AVIN, PG, FB, EN | VA-DC | -0.3 |  | 6 | V | DC non switching | 4 |+| Power Pins DC non switching: PVIN, SW | VP-DC | -0.3 |  | 6 | V | DC non switching | 4 |+| Between PVIN, PGND pins, transient | VP-TR | -0.3 |  | 7.5 | V | 3 ns to 3 MHz | 4 |+| Latchup Current | ILU | -100 |  | 100 | mA | JESD78 Class II (Note 3) | 4 |+| Junction Temperature Range | TJMAX | -40 |  |  | °C | Note 4; max printed as TSD (thermal shutdown threshold) | 4 |+| Storage Temperature Range | TSTG | -55 |  | 150 | °C |  | 4 |+| Analog Input Supply | AVINR | 2.5 |  | 5.5 | V |  | 4 |+| Power Input Supply | PVINR | 2.5 |  | 5.5 | V |  | 4 |+| Operating Junction Temperature Range | TJ | -40 |  | 125 | °C | Note 8 | 4 |+| Inductor for DC to DC Converter | LOUT | 0.67 | 1 |  | µH | Including de-ratings (Note 9) | 4 |+| Output Capacitor | COUT | 7 | 10 |  | µF | Notes 9, 10 | 4 |+| Input Capacitor for Power Supply | CPVIN | 7 | 10 |  | µF | Note 9 | 4 |+| VIN Input Voltage Range | VIN | 2.5 |  | 5.5 | V | Note 14: at first power-up VIN must be > 2.6 V | 5 |+| VIN Shutdown Current | ISD |  |  | 1 | µA | EN low (Note 13 for NCP6324) | 5 |+| Output Voltage Range | VOUT | 0.6 |  |  | V | Note 11 (guaranteed by design); max printed as VIN | 5 |+| FB Voltage | VFB | 594 | 600 | 606 | mV | PWM Mode | 5 |+| Output Peak Current Limit P-Channel | ILIMP | 2.3 | 2.8 | 3.3 | A | P-Channel | 5 |+| VIN UVLO Falling Threshold | VINUV- |  |  | 2.4 | V |  | 5 |+| VIN UVLO Hysteresis | VINHYS | 60 | 140 | 200 | mV |  | 5 |+| Power Good Low Threshold | VPGL | 87 | 90 | 92 | % | VOUT falls to cross threshold, percentage of FB voltage (Note 12; NCx6324B only) | 5 |+| Power Good Hysteresis | VPGHYS | 0 | 5 | 7 | % | VOUT rises to cross threshold, percentage of VPGL voltage (Note 12) | 5 |+| Power Good Pin Low Voltage | VPG_L |  |  | 0.3 | V | 5 mA sink current (Note 12) | 5 |+| Power Good Pin Leakage Current | PG_LK |  |  | 100 | nA | 3.6 V at PG pin when power good valid (Note 12) | 5 |+| High-Side MOSFET ON Resistance | RON_H |  | 160 | 200 | mΩ | VIN = 3.6 V (Note 13 for NCP6324) | 5 |+| Low-Side MOSFET ON Resistance | RON_L |  | 110 | 140 | mΩ | VIN = 3.6 V (Note 13 for NCP6324) | 5 |+| Normal Operation Frequency | FSW | 2.7 | 3 | 3.3 | MHz |  | 6 |+| Start Time | TSTART | 0 | 0.18 | 1 | ms | Time from EN to 90% of output voltage target | 6 |+| EN Input High Voltage | VEN_H | 1.1 |  |  | V |  | 6 |+| EN Input Low Voltage | VEN_L |  |  | 0.4 | V |  | 6 |+| EN Input Bias Current | IEN_BIAS |  |  | 1 | µA |  | 6 |+| Internal Output Discharge Resistance | R_DIS | 75 | 500 | 700 | Ω | from SW to PGND | 6 |+| Junction-to-Top Case Thermal Resistance | RJC |  | 12 |  | °C/W | Note 5: NCP6324EVB board, 2-1 oz copper traces | 4 |+| Junction-to-Board Thermal Resistance | RJB |  | 30 |  | °C/W | Note 5: NCP6324EVB board | 4 |+| Junction-to-Ambient Thermal Resistance | RJA |  | 62 |  | °C/W | Note 5: NCP6324EVB board | 4 |+| Power Dissipation | PD |  | 1.6 |  | W | Note 6: depends on input voltage, output current and external components | 4 |+| Human Body Model ESD Rating | ESD HBM |  | 2000 |  | V | JESD22-A114 (Note 2) | 4 |+| Machine Model ESD Rating | ESD MM |  | 200 |  | V | JESD22-A115 (Note 2) | 4 |  ## CAD (land: KiCad; 3D: generated from the datasheet) @@ -78,7 +82,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv6324bmtaatb-d.pdf) (15 pp, sha256 `cb43840d1bbe2024`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv6324bmtaatb-d.pdf) (17 pp, sha256 `7cfe5dbc68db3f02`, retrieved 2026-11-20) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated). 
docs/ncv6324bmtaatbg-datasheet.pdf
⋯ 1 unchanged line ⋯
ncv6324bmtaatbg.kicad_sym+1−1
@@ -12,7 +12,7 @@       (name "PGND" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin power_out line (at -17.78 2.54 0) (length 5.08)+    (pin output line (at -17.78 2.54 0) (length 5.08)       (name "SW" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )
ncv6324bmtaatbg.lbr+1−1
@@ -124,7 +124,7 @@         <technology name="">           <attribute name="MPN" value="NCV6324BMTAATBG" constant="no"/>           <attribute name="MANUFACTURER" value="onsemi" constant="no"/>-          <attribute name="DATASHEET" value="https://www.onsemi.com/pdf/datasheet/ncv6324bmtaatb-d.pdf" constant="no"/>+          <attribute name="DATASHEET" value="https://www.onsemi.com/pdf/datasheet/ncp6324-d.pdf" constant="no"/>           <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ncv6324bmtaatbg" constant="no"/>           <attribute name="MOUSER_PN" value="863-NCV6324BMTAATBG" constant="no"/>           <attribute name="DIGIKEY_PN" value="NCV6324BMTAATBGOSTR-ND" constant="no"/>
ncv6324bmtaatbg.step+1−1
@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-13T03:25:47',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-20T08:00:09',('Author'),(     'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'   ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
package.json+426−21
@@ -1,6 +1,6 @@ {   "slug": "ncv6324bmtaatbg",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "onsemi DC-DC Converters, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "863-NCV6324BMTAATBG"     },     "distributor_check": {-      "checked_at": "2026-11-13T03:25:54Z",+      "checked_at": "2026-11-20T08:00:17Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "NCV6324BMTAATBGOSTR-ND",@@ -69,25 +69,25 @@         "number": "1",         "name": "PGND",         "type": "power_in",-        "description": "Power ground for the power and analog blocks, which must be connected to the system ground."+        "description": "Power ground for the power and analog blocks; must be connected to the system ground."       },       {         "number": "2",         "name": "SW",-        "type": "power_out",-        "description": "Switch node that connects the power transistors to one end of the inductor; it is the output of the buck converter switching stage."+        "type": "output",+        "description": "Switch pin that connects the power transistors to one end of the inductor."       },       {         "number": "3",         "name": "AGND",         "type": "power_in",-        "description": "Analog and digital ground, which must be connected to the system ground."+        "description": "Analog ground for the analog and digital blocks; must be connected to the system ground."       },       {         "number": "4",         "name": "FB",         "type": "input",-        "description": "Feedback input to the error amplifier, connected to the resistor divider between VOUT and AGND; the internal reference is 0.6 V (VFB 594 to 606 mV in PWM mode)."+        "description": "Feedback voltage from the buck output into the error amplifier (internal reference 0.6 V), taken from a resistor divider between VOUT and AGND."       },       {         "number": "5",@@ -99,25 +99,25 @@         "number": "6",         "name": "PG/MODE",         "type": "output",-        "description": "On the NCx6324B (this MPN) this is the open-drain Power Good output, low when the output is not in regulation and high-impedance when power good is valid; it can be left unconnected when unused, and its PG low level is at most 0.3 V at 5 mA sink."+        "description": "On the NCx6324B this is an open-drain power good output (low = not in power good, high impedance = power good; may be left unconnected when unused); on the NCx6324C it is a MODE input (above 1.1 V forces forced PWM, below 0.4 V enables automatic PFM/PWM)."       },       {         "number": "7",         "name": "AVIN",         "type": "input",-        "description": "Analog and digital supply input that should be bypassed to ground with an optional 1 µF or larger ceramic capacitor placed as close as possible to the pin."+        "description": "Analog and digital supply input, 2.5 V to 5.5 V, bypassed to ground with an optional ceramic capacitor of 1 µF or larger placed close to the pin."       },       {         "number": "8",         "name": "PVIN",         "type": "power_in",-        "description": "Power supply input for the converter that must be bypassed to ground with a 10 µF or larger ceramic capacitor placed as close as possible to the pin; input range is 2.5 V to 5.5 V."+        "description": "Power supply input, 2.5 V to 5.5 V, bypassed to ground with a ceramic capacitor of 10 µF or larger placed as close as possible to the pin."       },       {         "number": "9",         "name": "PAD",         "type": "passive",-        "description": "Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance."+        "description": "Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance; the datasheet also states it is internally unconnected."       }     ],     "provenance": {@@ -131,17 +131,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet says the exposed pad must be soldered to system ground, but also states 'This pin is i; Pin 6 is named PG/MODE. The MODE function applies only to NCx6324C; for NCV6324BMTAATBG the pin is t; The datasheet pin description text lost the micro sign in the capacitor values, printed as '1 F' and"+          "extractor flagged: Pin 9 (exposed pad) is described both as 'Must be soldered to system ground' and 'This pin is intern; Pin 6 has two functions depending on the variant (PG for NCx6324B, MODE for NCx6324C). The NCV6324BM; Capacitor values '1 F' (AVIN) and '10 F' (PVIN) in the extracted text lost the micro sign; they are "         ],-        "pages_sent": 15,+        "pages_sent": 17,         "cost_usd": 0.0157,-        "at": "2026-11-13T03:25:43"+        "at": "2026-11-20T08:00:05"       },       "datasheet": {         "url": "https://www.onsemi.com/pdf/datasheet/ncv6324bmtaatb-d.pdf",-        "pages": 15,-        "sha256": "cb43840d1bbe2024",-        "source_tier": "mfr"+        "pages": 17,+        "sha256": "7cfe5dbc68db3f02",+        "source_tier": "mfr",+        "citation": "onsemi datasheet"       },       "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {@@ -178,8 +179,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "040a6f79e2322b04ff4b9d7de484ed6031f89164ed2c6f73dbb9ffdbb116c738",-        "checked": "2026-11-13",+        "sha256": "4464b4c97c0ef279bb80b9e46c7ab271183737197cfbc5d876c70e86ab05a351",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -197,8 +198,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "c9049c17f3b4d0d90176057bbf5769b1529677da1801692579f3bb9e986d602e",-        "checked": "2026-11-13",+        "sha256": "7bda1d7fdc5f6440d359e50a7b1b36f9990287a92c6652a0ff1bc5886b1e4dae",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -243,5 +244,409 @@         "by": "factory/package_fit.py"       }     }+  },+  "metadata": {+    "characteristics": {+      "version": 1,+      "source": "datasheet",+      "rows": [+        {+          "name": "VIN Input Voltage VIN Range",+          "symbol": "VIN",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 2.5,+          "typ": null,+          "max": 5.5,+          "conditions": "VIN Range (Note 10)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "VIN Shutdown Current",+          "symbol": "ISD",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": null,+          "max": 1,+          "conditions": "EN low (Note 9 for NCP6324)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Output Voltage Range",+          "symbol": "VOUT",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 0.6,+          "typ": null,+          "max": null,+          "conditions": "(Note 7)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "FB Voltage",+          "symbol": "VFB",+          "kind": "electrical",+          "unit": "mV",+          "min": 594,+          "typ": 600,+          "max": 606,+          "conditions": "PWM Mode",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Output Current Capability",+          "symbol": "IOUTMAX",+          "kind": "recommended_operating",+          "unit": "A",+          "min": 2,+          "typ": null,+          "max": null,+          "conditions": "(Note 7)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Output Peak Current Limit P-Channel",+          "symbol": "ILIMP",+          "kind": "electrical",+          "unit": "A",+          "min": 2.3,+          "typ": 2.8,+          "max": 3.3,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "VIN UVLO Falling Threshold",+          "symbol": "VINUV−",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 2.4,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "VIN UVLO Hysteresis",+          "symbol": "VINHYS",+          "kind": "electrical",+          "unit": "mV",+          "min": 60,+          "typ": 140,+          "max": 200,+          "conditions": "",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Power Good Low Threshold",+          "symbol": "VPGL",+          "kind": "electrical",+          "unit": "%",+          "min": 87,+          "typ": 90,+          "max": 92,+          "conditions": "VOUT falls down to cross the threshold (percentage of FB voltage) (Note 8)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Power Good Hysteresis",+          "symbol": "VPGHYS",+          "kind": "electrical",+          "unit": "%",+          "min": 0,+          "typ": 5,+          "max": 7,+          "conditions": "VOUT rises up to cross the threshold (percentage of Power Good Low Threshold (VPGL) voltage) (Note 8)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Power Good Pin Low Voltage",+          "symbol": "VPG_L",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 0.3,+          "conditions": "Voltage at PG pin with 5 mA sink current (Note 8)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Power Good Pin Leakage Current",+          "symbol": "PG_LK",+          "kind": "electrical",+          "unit": "nA",+          "min": null,+          "typ": null,+          "max": 100,+          "conditions": "3.6 V at PG pin when power good valid (Note 8)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "High-Side MOSFET ON Resistance",+          "symbol": "RON_H",+          "kind": "electrical",+          "unit": "mΩ",+          "min": null,+          "typ": 160,+          "max": 200,+          "conditions": "VIN = 3.6 V (Note 9 for NCP6324)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Low-Side MOSFET ON Resistance",+          "symbol": "RON_L",+          "kind": "electrical",+          "unit": "mΩ",+          "min": null,+          "typ": 110,+          "max": 140,+          "conditions": "VIN = 3.6 V (Note 9 for NCP6324)",+          "source_page": 4,+          "source": "datasheet"+        },+        {+          "name": "Normal Operation Frequency",+          "symbol": "FSW",+          "kind": "electrical",+          "unit": "MHz",+          "min": 2.7,+          "typ": 3,+          "max": 3.3,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Start Time",+          "symbol": "TSTART",+          "kind": "timing",+          "unit": "ms",+          "min": 0,+          "typ": 0.18,+          "max": 1,+          "conditions": "Time from EN to 90% of output voltage target",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "EN Input High Voltage",+          "symbol": "VEN_H",+          "kind": "electrical",+          "unit": "V",+          "min": 1.1,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "EN Input Low Voltage",+          "symbol": "VEN_L",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 0.4,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "EN Input Bias Current",+          "symbol": "IEN_BIAS",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": 0.1,+          "max": 1,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Internal Output Discharge Resistance from SW to PGND",+          "symbol": "R_DIS",+          "kind": "electrical",+          "unit": "Ω",+          "min": 75,+          "typ": 500,+          "max": 700,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Analog Pins DC non switching voltage",+          "symbol": "VA−DC",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": 6,+          "conditions": "DC non switching: AVIN, PG, FB, EN",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Power Pins DC non switching voltage",+          "symbol": "VP−DC",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": 6,+          "conditions": "DC non switching: PVIN, SW",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Transient voltage between PVIN and PGND",+          "symbol": "VP−TR",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": 7.5,+          "conditions": "Between PVIN, PGND pins, transient 3 ns − 3 MHz",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Human Body Model (HBM) ESD Rating",+          "symbol": "ESD HBM",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 2000,+          "conditions": "(Note 1)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Machine Model (MM) ESD Rating",+          "symbol": "ESD MM",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 200,+          "conditions": "(Note 1)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Latchup Current",+          "symbol": "ILU",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": -100,+          "typ": null,+          "max": 100,+          "conditions": "(Note 2)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Operating Junction Temperature Range",+          "symbol": "TJ",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -40,+          "typ": null,+          "max": 125,+          "conditions": "(Note 3)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Operating Ambient Temperature Range (NCV6324)",+          "symbol": "TA",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -40,+          "typ": null,+          "max": 125,+          "conditions": "NCV6324",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Storage Temperature Range",+          "symbol": "TSTG",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -55,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Thermal Resistance Junction-to-Top Case",+          "symbol": "RJC",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": null,+          "max": 12,+          "conditions": "(Note 4)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Thermal Resistance Junction-to-Board",+          "symbol": "RJB",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": null,+          "max": 30,+          "conditions": "(Note 4)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Thermal Resistance Junction-to-Ambient",+          "symbol": "RJA",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": null,+          "max": 62,+          "conditions": "(Note 4)",+          "source_page": 3,+          "source": "datasheet"+        },+        {+          "name": "Power Dissipation",+          "symbol": "PD",+          "kind": "absolute_maximum",+          "unit": "W",+          "min": null,+          "typ": null,+          "max": 1.6,+          "conditions": "(Note 5)",+          "source_page": 3,+          "source": "datasheet"+        }+      ]+    }   } }
page.json+25−29
@@ -4,7 +4,7 @@   "slug": "ncv6324bmtaatbg",   "title": "NCV6324BMTAATBG",   "brief": "onsemi DC-DC Converters, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "863-NCV6324BMTAATBG"     },     "distributor_check": {-      "checked_at": "2026-11-13T03:25:54Z",+      "checked_at": "2026-11-20T08:00:17Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "NCV6324BMTAATBGOSTR-ND",@@ -52,25 +52,25 @@         "number": "1",         "name": "PGND",         "type": "power_in",-        "description": "Power ground for the power and analog blocks, which must be connected to the system ground."+        "description": "Power ground for the power and analog blocks; must be connected to the system ground."       },       {         "number": "2",         "name": "SW",-        "type": "power_out",-        "description": "Switch node that connects the power transistors to one end of the inductor; it is the output of the buck converter switching stage."+        "type": "output",+        "description": "Switch pin that connects the power transistors to one end of the inductor."       },       {         "number": "3",         "name": "AGND",         "type": "power_in",-        "description": "Analog and digital ground, which must be connected to the system ground."+        "description": "Analog ground for the analog and digital blocks; must be connected to the system ground."       },       {         "number": "4",         "name": "FB",         "type": "input",-        "description": "Feedback input to the error amplifier, connected to the resistor divider between VOUT and AGND; the internal reference is 0.6 V (VFB 594 to 606 mV in PWM mode)."+        "description": "Feedback voltage from the buck output into the error amplifier (internal reference 0.6 V), taken from a resistor divider between VOUT and AGND."       },       {         "number": "5",@@ -82,25 +82,25 @@         "number": "6",         "name": "PG/MODE",         "type": "output",-        "description": "On the NCx6324B (this MPN) this is the open-drain Power Good output, low when the output is not in regulation and high-impedance when power good is valid; it can be left unconnected when unused, and its PG low level is at most 0.3 V at 5 mA sink."+        "description": "On the NCx6324B this is an open-drain power good output (low = not in power good, high impedance = power good; may be left unconnected when unused); on the NCx6324C it is a MODE input (above 1.1 V forces forced PWM, below 0.4 V enables automatic PFM/PWM)."       },       {         "number": "7",         "name": "AVIN",         "type": "input",-        "description": "Analog and digital supply input that should be bypassed to ground with an optional 1 µF or larger ceramic capacitor placed as close as possible to the pin."+        "description": "Analog and digital supply input, 2.5 V to 5.5 V, bypassed to ground with an optional ceramic capacitor of 1 µF or larger placed close to the pin."       },       {         "number": "8",         "name": "PVIN",         "type": "power_in",-        "description": "Power supply input for the converter that must be bypassed to ground with a 10 µF or larger ceramic capacitor placed as close as possible to the pin; input range is 2.5 V to 5.5 V."+        "description": "Power supply input, 2.5 V to 5.5 V, bypassed to ground with a ceramic capacitor of 10 µF or larger placed as close as possible to the pin."       },       {         "number": "9",         "name": "PAD",         "type": "passive",-        "description": "Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance."+        "description": "Exposed pad that must be soldered to system ground to achieve the stated power dissipation performance; the datasheet also states it is internally unconnected."       }     ],     "provenance": {@@ -114,17 +114,18 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet says the exposed pad must be soldered to system ground, but also states 'This pin is i; Pin 6 is named PG/MODE. The MODE function applies only to NCx6324C; for NCV6324BMTAATBG the pin is t; The datasheet pin description text lost the micro sign in the capacitor values, printed as '1 F' and"+          "extractor flagged: Pin 9 (exposed pad) is described both as 'Must be soldered to system ground' and 'This pin is intern; Pin 6 has two functions depending on the variant (PG for NCx6324B, MODE for NCx6324C). The NCV6324BM; Capacitor values '1 F' (AVIN) and '10 F' (PVIN) in the extracted text lost the micro sign; they are "         ],-        "pages_sent": 15,+        "pages_sent": 17,         "cost_usd": 0.0157,-        "at": "2026-11-13T03:25:43"+        "at": "2026-11-20T08:00:05"       },       "datasheet": {         "url": "https://www.onsemi.com/pdf/datasheet/ncv6324bmtaatb-d.pdf",-        "pages": 15,-        "sha256": "cb43840d1bbe2024",-        "source_tier": "mfr"+        "pages": 17,+        "sha256": "7cfe5dbc68db3f02",+        "source_tier": "mfr",+        "citation": "onsemi datasheet"       },       "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {@@ -161,8 +162,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "040a6f79e2322b04ff4b9d7de484ed6031f89164ed2c6f73dbb9ffdbb116c738",-        "checked": "2026-11-13",+        "sha256": "4464b4c97c0ef279bb80b9e46c7ab271183737197cfbc5d876c70e86ab05a351",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -180,8 +181,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "c9049c17f3b4d0d90176057bbf5769b1529677da1801692579f3bb9e986d602e",-        "checked": "2026-11-13",+        "sha256": "7bda1d7fdc5f6440d359e50a7b1b36f9990287a92c6652a0ff1bc5886b1e4dae",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -228,16 +229,9 @@     }   },   "metadata": {-    "specs": {-      "Manufacturer": "onsemi",-      "Package": "DFN-8-EP(2x2)",-      "Category": "Power Management ICs",-      "Pins": "9"-    },     "characteristics": {       "version": 1,       "source": "datasheet",-      "datasheet_sha256": "cb43840d1bbe2024ff8000769f713e788ba8795935f09f686c2f0a4bcc6187b1",       "rows": [         {           "name": "VIN Input Voltage VIN Range",@@ -676,5 +670,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "onsemi DC-DC Converters, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file