main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp81610mntxg: viewers · Ray
ncp81610mntxg-etched.glb Publish 0.1.0 · Ray
ncp81610mntxg-etched.step ncp81610mntxg: factory component page (tier=mfr) · Ray
ncp81610mntxg-hero.glb ncp81610mntxg: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp81610mntxg-hero.overlay.json Publish 0.1.0 · Ray
ncp81610mntxg.glb Publish 0.1.0 · Ray
ncp81610mntxg.kicad_mod Publish 0.1.0 · Ray
ncp81610mntxg.kicad_sym Publish 0.1.0 · Ray
ncp81610mntxg.lbr Publish 0.1.0 · Ray
ncp81610mntxg.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

NCP81610MNTXG

onsemi · DC-DC Controllers · QFN-40-EP(5x5)

NCP81610MNTXG from onsemi, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REFIN input Reference voltage input for output voltage regulation.
2 VREF power_out 2.0 V output reference voltage; a 10 nF ceramic capacitor to ground is required.
3 VRMP input Feed-forward input of VIN for the ramp slope compensation; supply range 2.8 V to 20 V, absolute max 25 V.
4 PWM8/SS bidirectional PWM 8 output / soft start setting; at startup a resistor to ground programs the soft start time.
5 PWM7/I2C bidirectional PWM 7 output / I2C address; at startup a resistor to ground programs the I2C address.
6 PWM6/LPC1 bidirectional PWM 6 output / low phase count 1; at startup a resistor to ground programs the warm boot-up power zone (PSI low).
7 PWM5/LPC2 bidirectional PWM 5 output / low phase count 2; at startup a resistor to ground programs the cold boot-up power zone (PSI low).
8 PWM4/PHTH1 bidirectional PWM 4 output / phase shedding threshold 1; at startup a resistor to ground programs the threshold (PSI mid).
9 PWM3/PHTH2 bidirectional PWM 3 output / phase shedding threshold 2; at startup a resistor to ground programs the threshold (PSI mid).
10 PWM2/PHTH3 bidirectional PWM 2 output / phase shedding threshold 3; at startup a resistor to ground programs the threshold (PSI mid).
11 PWM1/PHTH4 bidirectional PWM 1 output / phase shedding threshold 4; at startup a resistor to ground programs the threshold (PSI mid).
12 DRON bidirectional Bidirectional gate driver enable for external drivers.
13 CSP8 input Non-inverting input to current balance sense amplifier for phase 8; pull up to VCC with a 2 k resistor to disable PWM8.
14 CSP7 input Non-inverting input to current balance sense amplifier for phase 7; pull up to VCC with a 2 k resistor to disable PWM7.
15 CSP6 input Non-inverting input to current balance sense amplifier for phase 6; pull up to VCC with a 2 k resistor to disable PWM6.
16 CSP5 input Non-inverting input to current balance sense amplifier for phase 5; pull up to VCC with a 2 k resistor to disable PWM5.
17 CSP4 input Non-inverting input to current balance sense amplifier for phase 4; pull up to VCC with a 2 k resistor to disable PWM4.
18 CSP3 input Non-inverting input to current balance sense amplifier for phase 3; pull up to VCC with a 2 k resistor to disable PWM3.
19 CSP2 input Non-inverting input to current balance sense amplifier for phase 2; pull up to VCC with a 2 k resistor to disable PWM2.
20 CSP1 input Non-inverting input to current balance sense amplifier for phase 1; pull up to VCC with a 2 k resistor to disable PWM1.
21 CSREF input Total output current sense amplifier reference voltage input.
22 CSSUM input Inverting input of total current sense amplifier.
23 CSCOMP output Output of total current sense amplifier.
24 ILIM bidirectional Over current limit (OCL) threshold setting input, set by a shunt resistor to ground.
25 IOUT output Total output current; a resistor to GND is required to provide a 2 V drop at maximum output current.
26 TMON input DRMOS temperature monitoring input; linear range 0.6 V to 1.9 V.
27 FSW input A resistor to ground from this pin sets the regulator operating frequency (250 kHz to 1.2 MHz).
28 DIFF output Output of the regulator's differential remote sense amplifier.
29 FB input Error amplifier inverting (feedback) input.
30 COMP output Output of the error amplifier and inverting input of the PWM comparator.
31 VSP input Differential output voltage sense positive terminal.
32 VSN input Differential output voltage sense negative terminal; range GND-0.3 V to GND+0.3 V.
33 VCC power_in Power for the internal control circuits, 4.6 V to 5.4 V operating, with a 1 uF decoupling capacitor to ground.
34 SDA bidirectional Serial data bidirectional pin, requires pull-up resistor to VCC.
35 SCL input Serial bus clock pin, requires pull-up resistor to VCC.
36 EN input Logic input; high enables regulator output, low disables it (VIH 1.2 V min, VIL 0.6 V max).
37 PSI input Power saving interface control pin; can be set low, high or left floating.
38 PGOOD output Open drain power good indicator.
39 PWM_VID input PWM_VID buffer input.
40 VID_BUFF output PWM_VID pulse output from internal buffer; tri-stated if PWM_VID is floating.
41 AGND power_in Analog ground and thermal pad, connected to system ground.

Key specifications

Parameter Value
Manufacturer onsemi
Package QFN-40-EP(5x5)
Category Power Supply Chip
Pins 41

CAD (KiCad official)

  • Symbol: NCP81610MNTXG
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: ncp81610mntxg-etched.step / ncp81610mntxg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp81610mntxg.step / ncp81610mntxg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (31 pp, sha256 cc801e091dbe1b99, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF