main
Ray Publish 0.1.0 3257931
{
  "slug": "ncp81610mntxg",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi DC-DC Controllers, QFN-40-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ncp81610mntxg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp81610mntxg.kicad_sym",
    "ncp81610mntxg.kicad_mod",
    "ncp81610mntxg.glb",
    "ncp81610mntxg.step",
    "ncp81610mntxg.lbr",
    "docs/hero.png",
    "docs/ncp81610mntxg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp81610mntxg-hero.glb",
    "ncp81610mntxg-hero.overlay.json",
    "ncp81610mntxg-etched.glb"
  ],
  "component": {
    "mpn": "NCP81610MNTXG",
    "manufacturer": "onsemi",
    "package": "QFN-40-EP(5x5)",
    "pin_count": 41,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp81610mntx-d.pdf",
    "parts": {
      "symbol": "ncp81610mntxg.kicad_sym",
      "footprint": "ncp81610mntxg.kicad_mod",
      "model_3d": "ncp81610mntxg-hero.glb",
      "model_3d_plain": "ncp81610mntxg-etched.glb",
      "model_3d_step": "ncp81610mntxg-etched.step",
      "model_3d_step_plain": "ncp81610mntxg.step",
      "lbr": "ncp81610mntxg.lbr"
    },
    "distributor_links": {
      "lcsc": "C895770"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T07:26:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REFIN",
        "type": "input",
        "description": "Reference voltage input for output voltage regulation."
      },
      {
        "number": "2",
        "name": "VREF",
        "type": "power_out",
        "description": "2.0 V output reference voltage; a 10 nF ceramic capacitor to ground is required."
      },
      {
        "number": "3",
        "name": "VRMP",
        "type": "input",
        "description": "Feed-forward input of VIN for the ramp slope compensation; supply range 2.8 V to 20 V, absolute max 25 V."
      },
      {
        "number": "4",
        "name": "PWM8/SS",
        "type": "bidirectional",
        "description": "PWM 8 output / soft start setting; at startup a resistor to ground programs the soft start time."
      },
      {
        "number": "5",
        "name": "PWM7/I2C",
        "type": "bidirectional",
        "description": "PWM 7 output / I2C address; at startup a resistor to ground programs the I2C address."
      },
      {
        "number": "6",
        "name": "PWM6/LPC1",
        "type": "bidirectional",
        "description": "PWM 6 output / low phase count 1; at startup a resistor to ground programs the warm boot-up power zone (PSI low)."
      },
      {
        "number": "7",
        "name": "PWM5/LPC2",
        "type": "bidirectional",
        "description": "PWM 5 output / low phase count 2; at startup a resistor to ground programs the cold boot-up power zone (PSI low)."
      },
      {
        "number": "8",
        "name": "PWM4/PHTH1",
        "type": "bidirectional",
        "description": "PWM 4 output / phase shedding threshold 1; at startup a resistor to ground programs the threshold (PSI mid)."
      },
      {
        "number": "9",
        "name": "PWM3/PHTH2",
        "type": "bidirectional",
        "description": "PWM 3 output / phase shedding threshold 2; at startup a resistor to ground programs the threshold (PSI mid)."
      },
      {
        "number": "10",
        "name": "PWM2/PHTH3",
        "type": "bidirectional",
        "description": "PWM 2 output / phase shedding threshold 3; at startup a resistor to ground programs the threshold (PSI mid)."
      },
      {
        "number": "11",
        "name": "PWM1/PHTH4",
        "type": "bidirectional",
        "description": "PWM 1 output / phase shedding threshold 4; at startup a resistor to ground programs the threshold (PSI mid)."
      },
      {
        "number": "12",
        "name": "DRON",
        "type": "bidirectional",
        "description": "Bidirectional gate driver enable for external drivers."
      },
      {
        "number": "13",
        "name": "CSP8",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 8; pull up to VCC with a 2 k resistor to disable PWM8."
      },
      {
        "number": "14",
        "name": "CSP7",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 7; pull up to VCC with a 2 k resistor to disable PWM7."
      },
      {
        "number": "15",
        "name": "CSP6",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 6; pull up to VCC with a 2 k resistor to disable PWM6."
      },
      {
        "number": "16",
        "name": "CSP5",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 5; pull up to VCC with a 2 k resistor to disable PWM5."
      },
      {
        "number": "17",
        "name": "CSP4",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 4; pull up to VCC with a 2 k resistor to disable PWM4."
      },
      {
        "number": "18",
        "name": "CSP3",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 3; pull up to VCC with a 2 k resistor to disable PWM3."
      },
      {
        "number": "19",
        "name": "CSP2",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 2; pull up to VCC with a 2 k resistor to disable PWM2."
      },
      {
        "number": "20",
        "name": "CSP1",
        "type": "input",
        "description": "Non-inverting input to current balance sense amplifier for phase 1; pull up to VCC with a 2 k resistor to disable PWM1."
      },
      {
        "number": "21",
        "name": "CSREF",
        "type": "input",
        "description": "Total output current sense amplifier reference voltage input."
      },
      {
        "number": "22",
        "name": "CSSUM",
        "type": "input",
        "description": "Inverting input of total current sense amplifier."
      },
      {
        "number": "23",
        "name": "CSCOMP",
        "type": "output",
        "description": "Output of total current sense amplifier."
      },
      {
        "number": "24",
        "name": "ILIM",
        "type": "bidirectional",
        "description": "Over current limit (OCL) threshold setting input, set by a shunt resistor to ground."
      },
      {
        "number": "25",
        "name": "IOUT",
        "type": "output",
        "description": "Total output current; a resistor to GND is required to provide a 2 V drop at maximum output current."
      },
      {
        "number": "26",
        "name": "TMON",
        "type": "input",
        "description": "DRMOS temperature monitoring input; linear range 0.6 V to 1.9 V."
      },
      {
        "number": "27",
        "name": "FSW",
        "type": "input",
        "description": "A resistor to ground from this pin sets the regulator operating frequency (250 kHz to 1.2 MHz)."
      },
      {
        "number": "28",
        "name": "DIFF",
        "type": "output",
        "description": "Output of the regulator's differential remote sense amplifier."
      },
      {
        "number": "29",
        "name": "FB",
        "type": "input",
        "description": "Error amplifier inverting (feedback) input."
      },
      {
        "number": "30",
        "name": "COMP",
        "type": "output",
        "description": "Output of the error amplifier and inverting input of the PWM comparator."
      },
      {
        "number": "31",
        "name": "VSP",
        "type": "input",
        "description": "Differential output voltage sense positive terminal."
      },
      {
        "number": "32",
        "name": "VSN",
        "type": "input",
        "description": "Differential output voltage sense negative terminal; range GND-0.3 V to GND+0.3 V."
      },
      {
        "number": "33",
        "name": "VCC",
        "type": "power_in",
        "description": "Power for the internal control circuits, 4.6 V to 5.4 V operating, with a 1 uF decoupling capacitor to ground."
      },
      {
        "number": "34",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data bidirectional pin, requires pull-up resistor to VCC."
      },
      {
        "number": "35",
        "name": "SCL",
        "type": "input",
        "description": "Serial bus clock pin, requires pull-up resistor to VCC."
      },
      {
        "number": "36",
        "name": "EN",
        "type": "input",
        "description": "Logic input; high enables regulator output, low disables it (VIH 1.2 V min, VIL 0.6 V max)."
      },
      {
        "number": "37",
        "name": "PSI",
        "type": "input",
        "description": "Power saving interface control pin; can be set low, high or left floating."
      },
      {
        "number": "38",
        "name": "PGOOD",
        "type": "output",
        "description": "Open drain power good indicator."
      },
      {
        "number": "39",
        "name": "PWM_VID",
        "type": "input",
        "description": "PWM_VID buffer input."
      },
      {
        "number": "40",
        "name": "VID_BUFF",
        "type": "output",
        "description": "PWM_VID pulse output from internal buffer; tri-stated if PWM_VID is floating."
      },
      {
        "number": "41",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground and thermal pad, connected to system ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet pin table names pin 3 VRMP while the application schematic labels it VRAMP; VRMP used. Pin; The Pin Connections diagram is not in the provided text; numbering relies on the pin description tab"
        ],
        "pages_sent": 11,
        "cost_usd": 0.1707,
        "at": "2026-10-27T07:26:08"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp81610mntx-d.pdf",
        "pages": 31,
        "sha256": "cc801e091dbe1b99",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp81610mntxg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp81610mntxg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "afcdd8dbcf92f8b7522e1c66063f856cffffbbe4a1e6e5a779ee0174e886a1cb",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}