main
Ray
Publish 0.1.0
3257931
NCP81610MNTXG
onsemi · DC-DC Controllers · QFN-40-EP(5x5)
NCP81610MNTXG from onsemi, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN | input | Reference voltage input for output voltage regulation. |
| 2 | VREF | power_out | 2.0 V output reference voltage; a 10 nF ceramic capacitor to ground is required. |
| 3 | VRMP | input | Feed-forward input of VIN for the ramp slope compensation; supply range 2.8 V to 20 V, absolute max 25 V. |
| 4 | PWM8/SS | bidirectional | PWM 8 output / soft start setting; at startup a resistor to ground programs the soft start time. |
| 5 | PWM7/I2C | bidirectional | PWM 7 output / I2C address; at startup a resistor to ground programs the I2C address. |
| 6 | PWM6/LPC1 | bidirectional | PWM 6 output / low phase count 1; at startup a resistor to ground programs the warm boot-up power zone (PSI low). |
| 7 | PWM5/LPC2 | bidirectional | PWM 5 output / low phase count 2; at startup a resistor to ground programs the cold boot-up power zone (PSI low). |
| 8 | PWM4/PHTH1 | bidirectional | PWM 4 output / phase shedding threshold 1; at startup a resistor to ground programs the threshold (PSI mid). |
| 9 | PWM3/PHTH2 | bidirectional | PWM 3 output / phase shedding threshold 2; at startup a resistor to ground programs the threshold (PSI mid). |
| 10 | PWM2/PHTH3 | bidirectional | PWM 2 output / phase shedding threshold 3; at startup a resistor to ground programs the threshold (PSI mid). |
| 11 | PWM1/PHTH4 | bidirectional | PWM 1 output / phase shedding threshold 4; at startup a resistor to ground programs the threshold (PSI mid). |
| 12 | DRON | bidirectional | Bidirectional gate driver enable for external drivers. |
| 13 | CSP8 | input | Non-inverting input to current balance sense amplifier for phase 8; pull up to VCC with a 2 k resistor to disable PWM8. |
| 14 | CSP7 | input | Non-inverting input to current balance sense amplifier for phase 7; pull up to VCC with a 2 k resistor to disable PWM7. |
| 15 | CSP6 | input | Non-inverting input to current balance sense amplifier for phase 6; pull up to VCC with a 2 k resistor to disable PWM6. |
| 16 | CSP5 | input | Non-inverting input to current balance sense amplifier for phase 5; pull up to VCC with a 2 k resistor to disable PWM5. |
| 17 | CSP4 | input | Non-inverting input to current balance sense amplifier for phase 4; pull up to VCC with a 2 k resistor to disable PWM4. |
| 18 | CSP3 | input | Non-inverting input to current balance sense amplifier for phase 3; pull up to VCC with a 2 k resistor to disable PWM3. |
| 19 | CSP2 | input | Non-inverting input to current balance sense amplifier for phase 2; pull up to VCC with a 2 k resistor to disable PWM2. |
| 20 | CSP1 | input | Non-inverting input to current balance sense amplifier for phase 1; pull up to VCC with a 2 k resistor to disable PWM1. |
| 21 | CSREF | input | Total output current sense amplifier reference voltage input. |
| 22 | CSSUM | input | Inverting input of total current sense amplifier. |
| 23 | CSCOMP | output | Output of total current sense amplifier. |
| 24 | ILIM | bidirectional | Over current limit (OCL) threshold setting input, set by a shunt resistor to ground. |
| 25 | IOUT | output | Total output current; a resistor to GND is required to provide a 2 V drop at maximum output current. |
| 26 | TMON | input | DRMOS temperature monitoring input; linear range 0.6 V to 1.9 V. |
| 27 | FSW | input | A resistor to ground from this pin sets the regulator operating frequency (250 kHz to 1.2 MHz). |
| 28 | DIFF | output | Output of the regulator's differential remote sense amplifier. |
| 29 | FB | input | Error amplifier inverting (feedback) input. |
| 30 | COMP | output | Output of the error amplifier and inverting input of the PWM comparator. |
| 31 | VSP | input | Differential output voltage sense positive terminal. |
| 32 | VSN | input | Differential output voltage sense negative terminal; range GND-0.3 V to GND+0.3 V. |
| 33 | VCC | power_in | Power for the internal control circuits, 4.6 V to 5.4 V operating, with a 1 uF decoupling capacitor to ground. |
| 34 | SDA | bidirectional | Serial data bidirectional pin, requires pull-up resistor to VCC. |
| 35 | SCL | input | Serial bus clock pin, requires pull-up resistor to VCC. |
| 36 | EN | input | Logic input; high enables regulator output, low disables it (VIH 1.2 V min, VIL 0.6 V max). |
| 37 | PSI | input | Power saving interface control pin; can be set low, high or left floating. |
| 38 | PGOOD | output | Open drain power good indicator. |
| 39 | PWM_VID | input | PWM_VID buffer input. |
| 40 | VID_BUFF | output | PWM_VID pulse output from internal buffer; tri-stated if PWM_VID is floating. |
| 41 | AGND | power_in | Analog ground and thermal pad, connected to system ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-40-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 41 |
CAD (KiCad official)
- Symbol:
NCP81610MNTXG - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
ncp81610mntxg-etched.step/ncp81610mntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp81610mntxg.step/ncp81610mntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (31 pp, sha256
cc801e091dbe1b99, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP81610MNTXG
**onsemi** · DC-DC Controllers · QFN-40-EP(5x5)
NCP81610MNTXG from onsemi, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN | input | Reference voltage input for output voltage regulation. |
| 2 | VREF | power_out | 2.0 V output reference voltage; a 10 nF ceramic capacitor to ground is required. |
| 3 | VRMP | input | Feed-forward input of VIN for the ramp slope compensation; supply range 2.8 V to 20 V, absolute max 25 V. |
| 4 | PWM8/SS | bidirectional | PWM 8 output / soft start setting; at startup a resistor to ground programs the soft start time. |
| 5 | PWM7/I2C | bidirectional | PWM 7 output / I2C address; at startup a resistor to ground programs the I2C address. |
| 6 | PWM6/LPC1 | bidirectional | PWM 6 output / low phase count 1; at startup a resistor to ground programs the warm boot-up power zone (PSI low). |
| 7 | PWM5/LPC2 | bidirectional | PWM 5 output / low phase count 2; at startup a resistor to ground programs the cold boot-up power zone (PSI low). |
| 8 | PWM4/PHTH1 | bidirectional | PWM 4 output / phase shedding threshold 1; at startup a resistor to ground programs the threshold (PSI mid). |
| 9 | PWM3/PHTH2 | bidirectional | PWM 3 output / phase shedding threshold 2; at startup a resistor to ground programs the threshold (PSI mid). |
| 10 | PWM2/PHTH3 | bidirectional | PWM 2 output / phase shedding threshold 3; at startup a resistor to ground programs the threshold (PSI mid). |
| 11 | PWM1/PHTH4 | bidirectional | PWM 1 output / phase shedding threshold 4; at startup a resistor to ground programs the threshold (PSI mid). |
| 12 | DRON | bidirectional | Bidirectional gate driver enable for external drivers. |
| 13 | CSP8 | input | Non-inverting input to current balance sense amplifier for phase 8; pull up to VCC with a 2 k resistor to disable PWM8. |
| 14 | CSP7 | input | Non-inverting input to current balance sense amplifier for phase 7; pull up to VCC with a 2 k resistor to disable PWM7. |
| 15 | CSP6 | input | Non-inverting input to current balance sense amplifier for phase 6; pull up to VCC with a 2 k resistor to disable PWM6. |
| 16 | CSP5 | input | Non-inverting input to current balance sense amplifier for phase 5; pull up to VCC with a 2 k resistor to disable PWM5. |
| 17 | CSP4 | input | Non-inverting input to current balance sense amplifier for phase 4; pull up to VCC with a 2 k resistor to disable PWM4. |
| 18 | CSP3 | input | Non-inverting input to current balance sense amplifier for phase 3; pull up to VCC with a 2 k resistor to disable PWM3. |
| 19 | CSP2 | input | Non-inverting input to current balance sense amplifier for phase 2; pull up to VCC with a 2 k resistor to disable PWM2. |
| 20 | CSP1 | input | Non-inverting input to current balance sense amplifier for phase 1; pull up to VCC with a 2 k resistor to disable PWM1. |
| 21 | CSREF | input | Total output current sense amplifier reference voltage input. |
| 22 | CSSUM | input | Inverting input of total current sense amplifier. |
| 23 | CSCOMP | output | Output of total current sense amplifier. |
| 24 | ILIM | bidirectional | Over current limit (OCL) threshold setting input, set by a shunt resistor to ground. |
| 25 | IOUT | output | Total output current; a resistor to GND is required to provide a 2 V drop at maximum output current. |
| 26 | TMON | input | DRMOS temperature monitoring input; linear range 0.6 V to 1.9 V. |
| 27 | FSW | input | A resistor to ground from this pin sets the regulator operating frequency (250 kHz to 1.2 MHz). |
| 28 | DIFF | output | Output of the regulator's differential remote sense amplifier. |
| 29 | FB | input | Error amplifier inverting (feedback) input. |
| 30 | COMP | output | Output of the error amplifier and inverting input of the PWM comparator. |
| 31 | VSP | input | Differential output voltage sense positive terminal. |
| 32 | VSN | input | Differential output voltage sense negative terminal; range GND-0.3 V to GND+0.3 V. |
| 33 | VCC | power_in | Power for the internal control circuits, 4.6 V to 5.4 V operating, with a 1 uF decoupling capacitor to ground. |
| 34 | SDA | bidirectional | Serial data bidirectional pin, requires pull-up resistor to VCC. |
| 35 | SCL | input | Serial bus clock pin, requires pull-up resistor to VCC. |
| 36 | EN | input | Logic input; high enables regulator output, low disables it (VIH 1.2 V min, VIL 0.6 V max). |
| 37 | PSI | input | Power saving interface control pin; can be set low, high or left floating. |
| 38 | PGOOD | output | Open drain power good indicator. |
| 39 | PWM_VID | input | PWM_VID buffer input. |
| 40 | VID_BUFF | output | PWM_VID pulse output from internal buffer; tri-stated if PWM_VID is floating. |
| 41 | AGND | power_in | Analog ground and thermal pad, connected to system ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-40-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 41 |
## CAD (KiCad official)
- Symbol: `NCP81610MNTXG`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm`
- 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `ncp81610mntxg-etched.step` / `ncp81610mntxg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp81610mntxg.step` / `ncp81610mntxg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp81610mntx-d.pdf) (31 pp, sha256 `cc801e091dbe1b99`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp81610mntxg-datasheet.pdf)