main
Ray
Publish 0.1.1
a19be60
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312
{
"schema_version": 1,
"type": "component",
"slug": "ncp59749mn2adjtbg",
"title": "NCP59749MN2ADJTBG",
"brief": "onsemi Pre-ordered transistors, VQFN-20-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"transistors",
"ncp59749mn2adjtbg",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "NCP59749MN2ADJTBG",
"manufacturer": "onsemi",
"package": "VQFN-20-EP(5x5)",
"pin_count": 21,
"category": "Transistors",
"subcategory": "Pre-ordered transistors",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp59749mn2adjtb-d.pdf",
"parts": {
"symbol": "ncp59749mn2adjtbg.kicad_sym",
"footprint": "ncp59749mn2adjtbg.kicad_mod",
"model_3d": "ncp59749mn2adjtbg-hero.glb",
"model_3d_plain": "ncp59749mn2adjtbg.glb",
"model_3d_step": "ncp59749mn2adjtbg-etched.step",
"model_3d_step_plain": "ncp59749mn2adjtbg.step",
"lbr": "ncp59749mn2adjtbg.lbr"
},
"distributor_links": {
"lcsc": "C603762",
"digikey": "NCP59749MN2ADJTBGOSTR-ND",
"mouser": "863-NCP59749MN2ADJTB"
},
"distributor_check": {
"checked_at": "2026-10-28T16:20:26Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "NCP59749MN2ADJTBGOSTR-ND",
"status": "found"
},
"mouser": {
"pn": "863-NCP59749MN2ADJTB",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage; a total typical capacitance of at least 2.2 µF (ceramic) is needed from this pin to ground to assure stability."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "5",
"name": "IN",
"type": "power_in",
"description": "Unregulated input to the device; VIN range is 0.8 V to 5.5 V per the features list."
},
{
"number": "6",
"name": "IN",
"type": "power_in",
"description": "Unregulated input to the device; VIN range is 0.8 V to 5.5 V per the features list."
},
{
"number": "7",
"name": "IN",
"type": "power_in",
"description": "Unregulated input to the device; VIN range is 0.8 V to 5.5 V per the features list."
},
{
"number": "8",
"name": "IN",
"type": "power_in",
"description": "Unregulated input to the device; VIN range is 0.8 V to 5.5 V per the features list."
},
{
"number": "9",
"name": "PG",
"type": "output",
"description": "Open-drain, active-high Power-Good output that goes high-impedance when VOUT exceeds the PG trip threshold and low-impedance below it; a pull-up of 10 kΩ to 1 MΩ to a supply up to 5.5 V is recommended, and it may be left floating if not needed."
},
{
"number": "10",
"name": "BIAS",
"type": "power_in",
"description": "Bias input voltage for the error amplifier, reference and internal control circuits, with a range of 2.7 V to 5.5 V."
},
{
"number": "11",
"name": "EN",
"type": "input",
"description": "Enable pin: driving high enables the regulator and driving low puts it into shutdown; it must not be left floating."
},
{
"number": "12",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "13",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "15",
"name": "SS",
"type": "passive",
"description": "Soft-start pin; a capacitor to ground sets the start-up time, and if left floating the soft-start ramp time is typically 200 µs."
},
{
"number": "16",
"name": "FB",
"type": "input",
"description": "Feedback connection to the center tap of the external resistor divider that sets the output voltage; it must not be left floating."
},
{
"number": "17",
"name": "NC",
"type": "unconnected",
"description": "No connection; can be left floating or connected to GND to allow better thermal contact to the top-side plane."
},
{
"number": "18",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage; a total typical capacitance of at least 2.2 µF (ceramic) is needed from this pin to ground to assure stability."
},
{
"number": "19",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage; a total typical capacitance of at least 2.2 µF (ceramic) is needed from this pin to ground to assure stability."
},
{
"number": "20",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage; a total typical capacitance of at least 2.2 µF (ceramic) is needed from this pin to ground to assure stability."
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The hint VQFN-20-EP(5x5) differs from the datasheet's package name QFN20 5x5, 0.65P (CASE 485DB). Th"
],
"pages_sent": 11,
"cost_usd": 0.0238,
"at": "2026-10-28T16:19:57"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncp59749mn2adjtb-d.pdf",
"pages": 11,
"sha256": "0e8ff9a7524ccf8c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp59749mn2adjtbg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9466f19e7a94c1920e0c82ac10746517bca0b846bd3c01a7053914bd9856799f",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp59749mn2adjtbg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c2bf75ca2697db93749ae8c60a8f5dfb61d196fb36f7d398778a82bfb2c72d20",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "onsemi",
"Package": "VQFN-20-EP(5x5)",
"Category": "Transistors",
"Pins": "21"
},
"appearance": {
"contacts": {
"quote": "should be connected to the NCP59749 respective pins directly in the device PCB copper layer, not through vias",
"page": 8,
"doc": "ds.pdf",
"material": "copper"
},
"version": 1,
"datasheet_sha256": "0e8ff9a7524ccf8c8632f1334ac45bdf050136da9aa4208d9faa4a2da33d45fb"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ncp59749mn2adjtbg"
],
"discovery_pitch": "NCP59749MN2ADJTBG (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp59749mn2adjtbg.kicad_sym",
"ncp59749mn2adjtbg.kicad_mod",
"ncp59749mn2adjtbg.glb",
"ncp59749mn2adjtbg.step",
"ncp59749mn2adjtbg.lbr",
"docs/hero.png",
"docs/ncp59749mn2adjtbg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp59749mn2adjtbg-hero.glb",
"ncp59749mn2adjtbg-hero.overlay.json",
"ncp59749mn2adjtbg-etched.glb",
"ncp59749mn2adjtbg-etched.step"
],
"visibility": "public",
"description": "onsemi Pre-ordered transistors, VQFN-20-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}