main
Ray
Publish 0.1.1
b21c2d7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218
{
"slug": "ncp1397bdr2g",
"version": "0.1.1",
"type": "component",
"description": "onsemi AC-DC Controllers and Regulators, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"ncp1397bdr2g"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp1397bdr2g.kicad_sym",
"ncp1397bdr2g.kicad_mod",
"ncp1397bdr2g.glb",
"ncp1397bdr2g.step",
"ncp1397bdr2g.lbr",
"docs/hero.png",
"docs/ncp1397bdr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp1397bdr2g-etched.step",
"ncp1397bdr2g-etched.glb"
],
"component": {
"mpn": "NCP1397BDR2G",
"manufacturer": "onsemi",
"package": "SOIC-16",
"pin_count": 16,
"category": "AC-DC Controllers and Regulators",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1397b-d.pdf",
"parts": {
"symbol": "ncp1397bdr2g.kicad_sym",
"footprint": "ncp1397bdr2g.kicad_mod",
"model_3d": "ncp1397bdr2g-etched.glb",
"model_3d_plain": "ncp1397bdr2g.glb",
"model_3d_step": "ncp1397bdr2g-etched.step",
"model_3d_step_plain": "ncp1397bdr2g.step",
"lbr": "ncp1397bdr2g.lbr"
},
"pins": [
{
"number": "1",
"name": "CSS(dis)",
"type": "passive",
"description": "Soft-start capacitor discharge pin. Connect to the external soft-start capacitor to reset (discharge) it before startup or during overload conditions so the next startup ramp begins from zero."
},
{
"number": "2",
"name": "Fmax",
"type": "passive",
"description": "Maximum frequency clamp. A resistor to this pin sets the upper frequency excursion of the VCO (VCO range up to 500 kHz)."
},
{
"number": "3",
"name": "Ctimer",
"type": "passive",
"description": "Fault timer duration. An external capacitor to GND sets the duration the controller tolerates a fault at the Fault pin before shutting down."
},
{
"number": "4",
"name": "Rt",
"type": "passive",
"description": "Minimum frequency clamp. A resistor to this pin sets the minimum oscillator frequency reached when VFB = 1 V (lower limit of the VCO sweep, typically ≥50 kHz)."
},
{
"number": "5",
"name": "BO",
"type": "input",
"description": "Brown-out detection input. Senses a scaled image of the bulk voltage; when the pin is driven above Vlatch (~4 V) the controller fully latches off, providing brown-out and PFC-association protection."
},
{
"number": "6",
"name": "FB",
"type": "input",
"description": "Feedback input. Injecting current (typically from an optocoupler in common-collector configuration) into this pin increases the oscillation frequency up to Fmax, providing loop regulation."
},
{
"number": "7",
"name": "DT",
"type": "passive",
"description": "Deadtime adjustment. A single resistor to GND sets the half-bridge dead-time between high-side and low-side conduction, adjustable from ~100 ns to 2 µs to prevent shoot-through."
},
{
"number": "8",
"name": "Skip/Disable",
"type": "input",
"description": "Skip or Disable input. Pulling low enters skip/disable; upon release a clean soft-start sequence occurs if VFB < 0.3 V, otherwise the IC restarts without soft-start (skip-cycle mode)."
},
{
"number": "9",
"name": "Fault",
"type": "input",
"description": "Fault detection input. When asserted above the first threshold the external timer (Ctimer) starts counting down and shuts down the controller; the soft-start discharge switch is simultaneously activated so operating frequency rises to protect the power stage. A second higher threshold (~1.5 V) latches the IC off permanently on the 'B' variant (NCP1397B)."
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "Analog ground reference for the controller and low-side driver return."
},
{
"number": "11",
"name": "Mlower",
"type": "output",
"description": "Low-side gate driver output. Drives the gate of the lower half-bridge MOSFET, referenced to GND, with 1 A sink / 0.5 A source peak capability."
},
{
"number": "12",
"name": "VCC",
"type": "power_in",
"description": "Controller supply pin. Accepts up to 20 V; typical startup current is 300 µA. Decouple with a local ceramic capacitor to GND."
},
{
"number": "13",
"name": "NC",
"type": "unconnected",
"description": "Pin 13 is omitted from the package (SO-16 'Less Pin 13'). Its absence increases the creepage distance between the low-voltage (VCC, pin 12) and high-voltage floating (HB, pin 14) sections."
},
{
"number": "14",
"name": "HB",
"type": "passive",
"description": "Half-bridge switching node connection. Return/reference for the high-side driver and bootstrap capacitor; connects to the source of the upper MOSFET / drain of the lower MOSFET (switching node up to 600 V)."
},
{
"number": "15",
"name": "Mupper",
"type": "output",
"description": "High-side gate driver output. Drives the gate of the upper half-bridge MOSFET, floating between HB and Vboot; 1 A sink / 0.5 A source peak capability."
},
{
"number": "16",
"name": "Vboot",
"type": "power_in",
"description": "Bootstrap supply pin for the high-side floating driver. Connect a bootstrap capacitor between Vboot and HB (charged from VCC via an external bootstrap diode) to supply the upper gate driver."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": "NCP1397BDR2GOSTR-ND",
"mouser": "863-NCP1397BDR2G"
},
"distributor_check": {
"checked_at": "2026-10-05T19:11:27Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "NCP1397BDR2GOSTR-ND",
"status": "found"
},
"mouser": {
"pn": "863-NCP1397BDR2G",
"status": "found"
}
},
"models_3d": [
{
"file": "ncp1397bdr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp1397bdr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "df19905f091480bd278d60b548905ad0cd9393b4b86df6c2ca68e824cb739177",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}