← Commit history
package.json+193−4@@ -1,6 +1,6 @@ { "slug": "ncp1397bdr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi AC-DC Controllers and Regulators, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,195 @@ "docs/hero.png", "docs/ncp1397bdr2g-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ncp1397bdr2g-etched.step",+ "ncp1397bdr2g-etched.glb"+ ],+ "component": {+ "mpn": "NCP1397BDR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1397b-d.pdf",+ "parts": {+ "symbol": "ncp1397bdr2g.kicad_sym",+ "footprint": "ncp1397bdr2g.kicad_mod",+ "model_3d": "ncp1397bdr2g-etched.glb",+ "model_3d_plain": "ncp1397bdr2g.glb",+ "model_3d_step": "ncp1397bdr2g-etched.step",+ "model_3d_step_plain": "ncp1397bdr2g.step",+ "lbr": "ncp1397bdr2g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CSS(dis)",+ "type": "passive",+ "description": "Soft-start capacitor discharge pin. Connect to the external soft-start capacitor to reset (discharge) it before startup or during overload conditions so the next startup ramp begins from zero."+ },+ {+ "number": "2",+ "name": "Fmax",+ "type": "passive",+ "description": "Maximum frequency clamp. A resistor to this pin sets the upper frequency excursion of the VCO (VCO range up to 500 kHz)."+ },+ {+ "number": "3",+ "name": "Ctimer",+ "type": "passive",+ "description": "Fault timer duration. An external capacitor to GND sets the duration the controller tolerates a fault at the Fault pin before shutting down."+ },+ {+ "number": "4",+ "name": "Rt",+ "type": "passive",+ "description": "Minimum frequency clamp. A resistor to this pin sets the minimum oscillator frequency reached when VFB = 1 V (lower limit of the VCO sweep, typically ≥50 kHz)."+ },+ {+ "number": "5",+ "name": "BO",+ "type": "input",+ "description": "Brown-out detection input. Senses a scaled image of the bulk voltage; when the pin is driven above Vlatch (~4 V) the controller fully latches off, providing brown-out and PFC-association protection."+ },+ {+ "number": "6",+ "name": "FB",+ "type": "input",+ "description": "Feedback input. Injecting current (typically from an optocoupler in common-collector configuration) into this pin increases the oscillation frequency up to Fmax, providing loop regulation."+ },+ {+ "number": "7",+ "name": "DT",+ "type": "passive",+ "description": "Deadtime adjustment. A single resistor to GND sets the half-bridge dead-time between high-side and low-side conduction, adjustable from ~100 ns to 2 µs to prevent shoot-through."+ },+ {+ "number": "8",+ "name": "Skip/Disable",+ "type": "input",+ "description": "Skip or Disable input. Pulling low enters skip/disable; upon release a clean soft-start sequence occurs if VFB < 0.3 V, otherwise the IC restarts without soft-start (skip-cycle mode)."+ },+ {+ "number": "9",+ "name": "Fault",+ "type": "input",+ "description": "Fault detection input. When asserted above the first threshold the external timer (Ctimer) starts counting down and shuts down the controller; the soft-start discharge switch is simultaneously activated so operating frequency rises to protect the power stage. A second higher threshold (~1.5 V) latches the IC off permanently on the 'B' variant (NCP1397B)."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground reference for the controller and low-side driver return."+ },+ {+ "number": "11",+ "name": "Mlower",+ "type": "output",+ "description": "Low-side gate driver output. Drives the gate of the lower half-bridge MOSFET, referenced to GND, with 1 A sink / 0.5 A source peak capability."+ },+ {+ "number": "12",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply pin. Accepts up to 20 V; typical startup current is 300 µA. Decouple with a local ceramic capacitor to GND."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "Pin 13 is omitted from the package (SO-16 'Less Pin 13'). Its absence increases the creepage distance between the low-voltage (VCC, pin 12) and high-voltage floating (HB, pin 14) sections."+ },+ {+ "number": "14",+ "name": "HB",+ "type": "passive",+ "description": "Half-bridge switching node connection. Return/reference for the high-side driver and bootstrap capacitor; connects to the source of the upper MOSFET / drain of the lower MOSFET (switching node up to 600 V)."+ },+ {+ "number": "15",+ "name": "Mupper",+ "type": "output",+ "description": "High-side gate driver output. Drives the gate of the upper half-bridge MOSFET, floating between HB and Vboot; 1 A sink / 0.5 A source peak capability."+ },+ {+ "number": "16",+ "name": "Vboot",+ "type": "power_in",+ "description": "Bootstrap supply pin for the high-side floating driver. Connect a bootstrap capacitor between Vboot and HB (charged from VCC via an external bootstrap diode) to supply the upper gate driver."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": "NCP1397BDR2GOSTR-ND",+ "mouser": "863-NCP1397BDR2G"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:11:27Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "NCP1397BDR2GOSTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "863-NCP1397BDR2G",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "ncp1397bdr2g.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ncp1397bdr2g-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "df19905f091480bd278d60b548905ad0cd9393b4b86df6c2ca68e824cb739177",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ncp1397bdr2g",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi AC-DC Controllers and Regulators, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ncp1397bdr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ncp1397bdr2g-etched.step"+ "ncp1397bdr2g-etched.step",+ "ncp1397bdr2g-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -218,5 +217,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}