component

NCP1014AP100G

Public Made by Adom

by adom

onsemi AC-DC Controllers And Regulators, DIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)ncp1014ap100gfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 14d ago
viewers ncp1014ap100g: viewers · Ray 14d ago
ncp1014ap100g-etched.glb Publish 0.1.0 · Ray 14d ago
ncp1014ap100g-etched.step ncp1014ap100g: factory component page (tier=lcsc) · Ray 14d ago
ncp1014ap100g-hero.glb ncp1014ap100g: hero GLB from the etched model (keeps the MPN mark) · Ray 14d ago
ncp1014ap100g-hero.overlay.json Publish 0.1.0 · Ray 14d ago
ncp1014ap100g.glb Publish 0.1.0 · Ray 14d ago
ncp1014ap100g.kicad_mod Publish 0.1.0 · Ray 14d ago
ncp1014ap100g.kicad_sym Publish 0.1.0 · Ray 14d ago
ncp1014ap100g.lbr Publish 0.1.0 · Ray 14d ago
ncp1014ap100g.step Publish 0.1.0 · Ray 14d ago
package.json Publish 0.1.0 · Ray 14d ago
page.json Set visibility: public · Ray 14d ago
README.md Publish 0.1.0 · Ray 14d ago

NCP1014AP100G

onsemi · AC-DC Controllers And Regulators · DIP-7

NCP1014AP100G from onsemi, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Powers the internal circuitry from an external capacitor of typically 10 mF as printed, and its active shunt (8.7 V typical clamp) serves as opto fail-safe protection, with a VCC rating of -0.3 to 10 V.
2 NC unconnected Not connected; the datasheet assigns no function to this pin in the PDIP-7 package.
3 GND power_in The IC ground reference.
4 FB input Feedback signal input where an optocoupler sets the peak current setpoint to the output power demand, and pulling this pin down externally disables the device.
5 Drain passive Internal drain connection of the built-in 700 V MOSFET, rated -0.3 to 700 V drain voltage.
7 GND power_in The IC ground.
8 GND power_in The IC ground.

Key specifications

Parameter Value
Manufacturer onsemi
Package DIP-7
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage on all pins except Pin 5 (Drain) VCC -0.3 10 V 4
Drain Voltage -0.3 700 V 4
Drain Current Peak during Transformer Saturation IDS(pk) 1 A NCP1012/13/14 4
Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp I_VCC 15 mA 4
ESD Capability, Human Body Model 2 kV All pins except HV 4
ESD Capability, Machine Model 200 V 4
Maximum Junction Temperature TJmax 150 C 4
Storage Temperature Range -60 150 C 4
Junction-to-Lead Thermal Resistance (P Suffix, Case 626A) RθJL 9 C/W Junction-to-lead 4
Junction-to-Air Thermal Resistance (P Suffix, Case 626A) RθJA 77 C/W Junction-to-air, 2.0 oz (70 mm) PCB copper clad, 0.36 Sq. Inch (2.32 Sq. Cm) 4
Junction-to-Air Thermal Resistance (P Suffix, Case 626A) RθJA 60 C/W Junction-to-air, 2.0 oz (70 mm) PCB copper clad, 1.0 Sq. Inch (6.45 Sq. Cm) 4
VCC Increasing Level at which the Current Source Turns-off VCCOFF 7.9 8.5 9.1 V 5
VCC Decreasing Level at which the Current Source Turns-on VCCON 6.9 7.5 8.1 V 5
VCC Decreasing Level at which the Latch-off Phase Ends VCClatch 4.4 4.7 5.1 V 5
Internal IC Consumption, MOSFET Switching at 100 kHz ICC1 0.95 1.15 mA MOSFET switching at 100 kHz (Note 2) 5
Active Zener Voltage Positive Offset to VCCOFF Vclamp 140 200 300 mV 5
Latch-off Current ILatch 6.3 7.4 9.2 mA NCP1012/13/14, 0C<TJ<125C 5
Latch-off Current ILatch 5.8 7.4 9.2 mA NCP1012/13/14, -40C<TJ<125C 5
High-voltage Current Source, VCC = 8.0 V IC1 5 8 10 mA VCC = 8.0 V; NCP1012/13/14, 0C<TJ<125C 5
High-voltage Current Source, VCC = 8.0 V IC1 5 8 11 mA VCC = 8.0 V; NCP1012/13/14, -40C<TJ<125C 5
Power Switch Circuit On-state Resistance RDSon 11 19 Ω NCP1012/13/14 (Id = 50 mA), TJ = 25C 5
Power Switch Circuit On-state Resistance RDSon 22 38 Ω NCP1012/13/14 (Id = 50 mA), TJ = 125C 5
Power Switch Circuit and Startup Breakdown Voltage BVdss 700 V ID(off) = 120 mA, TJ = 25C 5
Power Switch and Startup Breakdown Voltage Off-state Leakage Current IDS(OFF) 120 mA TJ = -40C (Vds = 650 V) 5
Maximum Internal Current Setpoint, NCP1014 Ipeak (11) 405 450 495 mA TJ = 25C (Note 2) 5
Oscillation Frequency, 100 kHz Version fOSC 90 100 110 kHz TJ = 25C (Note 4) 6
Maximum Duty-cycle Dmax 62 67 72 % 6
Temperature Shutdown TSD 140 150 160 C 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Junction--to--Lead Junction--to--Air, 2.0 oz (70 mm) Printed Circuit Copper Clad 4

CAD (KiCad official)

  • Symbol: NCP1014AP100G
  • Footprint: Package_DIP:DIP-8-N6_W7.62mm
  • 3D model: DIP-7 (KiCad packages3D, STEP)
  • 3D model files: ncp1014ap100g-etched.step / ncp1014ap100g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1014ap100g.step / ncp1014ap100g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 a94d548fa3b608cc, retrieved 2026-10-20, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF