# NCP1014AP100G

**onsemi** · AC-DC Controllers And Regulators · DIP-7

NCP1014AP100G from onsemi, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Powers the internal circuitry from an external capacitor of typically 10 mF as printed, and its active shunt (8.7 V typical clamp) serves as opto fail-safe protection, with a VCC rating of -0.3 to 10 V. |
| 2 | NC | unconnected | Not connected; the datasheet assigns no function to this pin in the PDIP-7 package. |
| 3 | GND | power_in | The IC ground reference. |
| 4 | FB | input | Feedback signal input where an optocoupler sets the peak current setpoint to the output power demand, and pulling this pin down externally disables the device. |
| 5 | Drain | passive | Internal drain connection of the built-in 700 V MOSFET, rated -0.3 to 700 V drain voltage. |
| 7 | GND | power_in | The IC ground. |
| 8 | GND | power_in | The IC ground. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-7 |
| Category | Power Management (PMIC) |
| Pins | 7 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage on all pins except Pin 5 (Drain) | VCC | -0.3 |  | 10 | V |  | 4 |
| Drain Voltage |  | -0.3 |  | 700 | V |  | 4 |
| Drain Current Peak during Transformer Saturation | IDS(pk) |  |  | 1 | A | NCP1012/13/14 | 4 |
| Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp | I_VCC |  |  | 15 | mA |  | 4 |
| ESD Capability, Human Body Model |  |  |  | 2 | kV | All pins except HV | 4 |
| ESD Capability, Machine Model |  |  |  | 200 | V |  | 4 |
| Maximum Junction Temperature | TJmax |  |  | 150 | C |  | 4 |
| Storage Temperature Range |  | -60 |  | 150 | C |  | 4 |
| Junction-to-Lead Thermal Resistance (P Suffix, Case 626A) | RθJL |  | 9 |  | C/W | Junction-to-lead | 4 |
| Junction-to-Air Thermal Resistance (P Suffix, Case 626A) | RθJA |  | 77 |  | C/W | Junction-to-air, 2.0 oz (70 mm) PCB copper clad, 0.36 Sq. Inch (2.32 Sq. Cm) | 4 |
| Junction-to-Air Thermal Resistance (P Suffix, Case 626A) | RθJA |  | 60 |  | C/W | Junction-to-air, 2.0 oz (70 mm) PCB copper clad, 1.0 Sq. Inch (6.45 Sq. Cm) | 4 |
| VCC Increasing Level at which the Current Source Turns-off | VCCOFF | 7.9 | 8.5 | 9.1 | V |  | 5 |
| VCC Decreasing Level at which the Current Source Turns-on | VCCON | 6.9 | 7.5 | 8.1 | V |  | 5 |
| VCC Decreasing Level at which the Latch-off Phase Ends | VCClatch | 4.4 | 4.7 | 5.1 | V |  | 5 |
| Internal IC Consumption, MOSFET Switching at 100 kHz | ICC1 |  | 0.95 | 1.15 | mA | MOSFET switching at 100 kHz (Note 2) | 5 |
| Active Zener Voltage Positive Offset to VCCOFF | Vclamp | 140 | 200 | 300 | mV |  | 5 |
| Latch-off Current | ILatch | 6.3 | 7.4 | 9.2 | mA | NCP1012/13/14, 0C<TJ<125C | 5 |
| Latch-off Current | ILatch | 5.8 | 7.4 | 9.2 | mA | NCP1012/13/14, -40C<TJ<125C | 5 |
| High-voltage Current Source, VCC = 8.0 V | IC1 | 5 | 8 | 10 | mA | VCC = 8.0 V; NCP1012/13/14, 0C<TJ<125C | 5 |
| High-voltage Current Source, VCC = 8.0 V | IC1 | 5 | 8 | 11 | mA | VCC = 8.0 V; NCP1012/13/14, -40C<TJ<125C | 5 |
| Power Switch Circuit On-state Resistance | RDSon |  | 11 | 19 | Ω | NCP1012/13/14 (Id = 50 mA), TJ = 25C | 5 |
| Power Switch Circuit On-state Resistance | RDSon |  | 22 | 38 | Ω | NCP1012/13/14 (Id = 50 mA), TJ = 125C | 5 |
| Power Switch Circuit and Startup Breakdown Voltage | BVdss | 700 |  |  | V | ID(off) = 120 mA, TJ = 25C | 5 |
| Power Switch and Startup Breakdown Voltage Off-state Leakage Current | IDS(OFF) |  |  | 120 | mA | TJ = -40C (Vds = 650 V) | 5 |
| Maximum Internal Current Setpoint, NCP1014 | Ipeak (11) | 405 | 450 | 495 | mA | TJ = 25C (Note 2) | 5 |
| Oscillation Frequency, 100 kHz Version | fOSC | 90 | 100 | 110 | kHz | TJ = 25C (Note 4) | 6 |
| Maximum Duty-cycle | Dmax | 62 | 67 | 72 | % |  | 6 |
| Temperature Shutdown | TSD | 140 | 150 | 160 | C |  | 6 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper |  | Junction--to--Lead Junction--to--Air, 2.0 oz (70 mm) Printed Circuit Copper Clad | 4 |

## CAD (KiCad official)

- Symbol: `NCP1014AP100G`
- Footprint: `Package_DIP:DIP-8-N6_W7.62mm`
- 3D model: DIP-7 (KiCad packages3D, STEP)
- 3D model files: `ncp1014ap100g-etched.step` / `ncp1014ap100g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp1014ap100g.step` / `ncp1014ap100g.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887471689621504) (24 pp, sha256 `a94d548fa3b608cc`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ncp1014ap100g-datasheet.pdf)