NCP1014AP100G

{
  "slug": "ncp1014ap100g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers And Regulators, DIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ncp1014ap100g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1014ap100g.kicad_sym",
    "ncp1014ap100g.kicad_mod",
    "ncp1014ap100g.glb",
    "ncp1014ap100g.step",
    "ncp1014ap100g.lbr",
    "docs/hero.png",
    "docs/ncp1014ap100g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1014ap100g-hero.glb",
    "ncp1014ap100g-hero.overlay.json",
    "ncp1014ap100g-etched.glb"
  ],
  "component": {
    "mpn": "NCP1014AP100G",
    "manufacturer": "onsemi",
    "package": "DIP-7",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887471689621504",
    "parts": {
      "symbol": "ncp1014ap100g.kicad_sym",
      "footprint": "ncp1014ap100g.kicad_mod",
      "model_3d": "ncp1014ap100g-hero.glb",
      "model_3d_plain": "ncp1014ap100g-etched.glb",
      "model_3d_step": "ncp1014ap100g-etched.step",
      "model_3d_step_plain": "ncp1014ap100g.step",
      "lbr": "ncp1014ap100g.lbr"
    },
    "distributor_links": {
      "lcsc": "C29741",
      "digikey": "NCP1014AP100GOS-ND",
      "mouser": "863-NCP1014AP100G"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T09:03:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCP1014AP100GOS-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "863-NCP1014AP100G",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Powers the internal circuitry from an external capacitor of typically 10 mF as printed, and its active shunt (8.7 V typical clamp) serves as opto fail-safe protection, with a VCC rating of -0.3 to 10 V."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet assigns no function to this pin in the PDIP-7 package."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "The IC ground reference."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback signal input where an optocoupler sets the peak current setpoint to the output power demand, and pulling this pin down externally disables the device."
      },
      {
        "number": "5",
        "name": "Drain",
        "type": "passive",
        "description": "Internal drain connection of the built-in 700 V MOSFET, rated -0.3 to 700 V drain voltage."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "The IC ground."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "The IC ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 6 does not appear in the PDIP-7 pin connections or pin function table, so no pin 6 is defined; i; The VCC capacitor value is printed as '10 mF', which is likely an OCR rendering of 10 µF; the value ; The datasheet lists several NCP1014 variants; the pinout is the same across PDIP-7 and Gull Wing, an"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0454,
        "at": "2026-10-20T09:03:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887471689621504",
        "pages": 24,
        "sha256": "a94d548fa3b608cc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1014ap100g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "f90bd1fa5f010bc999f2dd88ca613ee145644353e91e90fc2564259080330cbf",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1014ap100g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "4f96ad46c0dee8cb5d992bf7cf96fb3dff44164325d3432efc2870bc85e66eba",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}