main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mp6600lgr-z: viewers · Ray
mp6600lgr-z-etched.glb mp6600lgr-z: factory component page (tier=lcsc) · Ray
mp6600lgr-z-etched.step mp6600lgr-z: factory component page (tier=lcsc) · Ray
mp6600lgr-z-hero.glb mp6600lgr-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp6600lgr-z-hero.overlay.json mp6600lgr-z: hero GLB from the etched model (keeps the MPN mark) · Ray
mp6600lgr-z.glb Publish 0.1.0 · Ray
mp6600lgr-z.kicad_mod Publish 0.1.0 · Ray
mp6600lgr-z.kicad_sym Publish 0.1.0 · Ray
mp6600lgr-z.lbr Publish 0.1.0 · Ray
mp6600lgr-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 25 pins · Ray

MP6600LGR-Z

MONOLITHIC POWER SYSTEMS INC. · Global Sourcing Parts · QFN-24(4x4)

MP6600LGR-Z from MONOLITHIC POWER SYSTEMS INC., in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIR input Direction input that sets the direction of stepper motor rotation, with an internal pull-down resistor.
2 nFAULT output Open-drain fault indication output that is driven low on a fault condition such as OCP, OTP or OVP.
3 ISET passive Current set programming pin; a resistor from ISET to ground sets the motor current.
4 AGND power_in Analog ground.
5 ROSC passive Constant-off-time programming pin; a resistor from ROSC to ground sets the PWM off time.
6 MS2 input Mode selection input that sets the step mode together with MS1 (full, half, quarter or eighth step).
7 MS1 input Mode selection input that sets the step mode together with MS2; it has an internal pull-down resistor.
8 GND power_in Power ground.
9 BOUT1 output Bridge B output terminal 1.
10 VIN power_in Input supply voltage; both VIN pins must be connected to the same supply and VIN must be decoupled to ground with a minimum 100nF ceramic capacitor.
11 BOUT2 output Bridge B output terminal 2.
12 GND power_in Power ground.
13 STEP input Step input; each rising edge advances the motor by one increment and it has an internal pull-down resistor.
14 VCP power_out Charge pump output; connect a 1µF, 16V, X7R ceramic capacitor from VCP to VIN.
15 CP2 passive Charge pump capacitor terminal; connect a 100nF, X7R ceramic capacitor rated for at least the VIN voltage between CP1 and CP2.
16 CP1 passive Charge pump capacitor terminal; connect a 100nF, X7R ceramic capacitor rated for at least the VIN voltage between CP1 and CP2.
17 VG power_out Low-side MOSFET gate drive voltage; connect a 220nF, 16V, X7R ceramic capacitor from VG to ground.
18 ENBL input Enable input; driving it low disables the bridge outputs and translator operation, and it has an internal pull-down resistor.
19 nSLEEP input Sleep mode input; drive to logic high for normal operation, and it has an internal pull-down resistor.
20 GND power_in Power ground.
21 AOUT2 output Bridge A output terminal 2.
22 VIN power_in Input supply voltage; both VIN pins must be connected to the same supply and VIN must be decoupled to ground with a minimum 100nF ceramic capacitor.
23 AOUT1 output Bridge A output terminal 1.
24 GND power_in Power ground.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MONOLITHIC POWER SYSTEMS INC.
Package QFN-24(4x4)
Category Global Sourcing Parts
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VIN 4.5 35 V 4
Output current IA/BOUT -1.5 1.5 A 4
Operating junction temperature TJ -40 125 °C 4
Supply voltage VIN -0.3 40 V 4
xOUTx voltage VA/BOUT1/2 -0.7 40 V 4
Charge pump voltage VCP, CP2 6.5 V VIN to VIN + 6.5V (referenced to VIN) 4
All other pins to AGND -0.3 6.5 V 4
Continuous power dissipation PD 2.9 W TA = 25°C 4
Storage temperature TSTORE -55 150 °C 4
Junction temperature TJ 150 °C 4
Lead temperature (solder) 260 °C 4
ESD Human body model HBM -2 2 kV 4
ESD Charged device model CDM -2 2 kV 4
Input supply voltage VIN 4.5 24 35 V 5
Quiescent current IQ 1.5 5 mA VIN = 24V, ENBL = 1, nSLEEP = 1, with no load 5
Sleep current ISLEEP 1 µA VIN = 24V, nSLEEP = 0 5
Output on resistance HS-FET RHS 0.195 0.3 Ω VIN = 24V, IOUT = 1A, TJ = 25°C 5
Output on resistance HS-FET RHS 0.25 Ω VIN = 24V, IOUT = 1A, TJ = 85°C 5
Output on resistance LS-FET RLS 0.17 0.3 Ω VIN = 24V, IOUT = 1A, TJ = 25°C 5
Output on resistance LS-FET RLS 0.25 Ω VIN = 24V, IOUT = 1A, TJ = 85°C 5
Body diode forward voltage VF 1.1 V IOUT = 1.5A 5
Input logic low threshold VIL 0.8 V 5
Input logic high threshold VIH 2.1 V 5
Logic input current high IIN(H) 20 µA VIH = 5V 5
Logic input current low IIN(L) 5 µA VIL = 0.8V 5
Output low voltage VOL 0.5 V IO = 5mA 5
Output high leakage current IOH 1 µA VO = 3.3V 5
UVLO rising threshold VIN_RISE 3.3 3.6 4 V 5
UVLO falling threshold VIN_FALL 3 3.3 3.7 V 5
Input OVP threshold VOVP 36 37.5 38.5 V 5
Over-current trip level sinking IOCP1 3.5 6 8.5 A Sinking 5
Over-current trip level sourcing IOCP2 3.5 6 8.5 A Sourcing 5
Constant-off-time tOFF 19 23 26 µs Rt = 200kΩ 5
Peak current regulation level IPEAK 0.95 1 1.05 A RISET = 71kΩ 5
ISET voltage VISET 0.8 0.9 1 V 5
ISET current ratio AISET 11 12.676 14 µA/A 5
Current trip accuracy ΔITRIP -5 5 % RISET = 71kΩ, 71% to 100% 5
Current trip accuracy ΔITRIP -9 9 % RISET = 71kΩ, 38% to 67% 5
Current trip accuracy ΔITRIP -12 12 % RISET = 71kΩ, <34% 5
STEP high time t1 1 µs 6
STEP low time t2 1 µs 6
Set-up time MSx, DIR to STEP rising t3 200 ns 6
Hold time STEP rising to MSx, DIR change t4 200 ns 6
Reserved row: RPD internal pull-down resistance RPD 500 kΩ 5
Input OVP hysteresis ΔVOVP 1900 mV 5
Over-current deglitch time tOCP 1 µs Guaranteed by design (note 5) 5
Thermal shutdown TTSD 165 °C Guaranteed by design (note 5) 5
Thermal shutdown hysteresis ΔTTSD 15 °C Guaranteed by design (note 5) 5
Blanking time tBLANK 2 µs Guaranteed by design (note 5) 5
Thermal resistance junction-to-ambient θJA 42 °C/W QFN-24 (4mmx4mm), JESD51-7 4-layer PCB 4
Thermal resistance junction-to-case θJC 9 °C/W QFN-24 (4mmx4mm) 4

CAD (KiCad official)

  • Symbol: MP6600LGR-Z
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: mp6600lgr-z-etched.step / mp6600lgr-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp6600lgr-z.step / mp6600lgr-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MONOLITHIC POWER SYSTEMS INC. datasheet, copy hosted by LCSC (21 pp, sha256 5d477fc1c0631eaa, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF