main
Ray Publish 0.1.0 b5da484
{
  "slug": "mp6600lgr-z",
  "version": "0.1.0",
  "type": "component",
  "description": "MONOLITHIC POWER SYSTEMS INC. Global Sourcing Parts, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "mp6600lgr-z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mp6600lgr-z.kicad_sym",
    "mp6600lgr-z.kicad_mod",
    "mp6600lgr-z.glb",
    "mp6600lgr-z.step",
    "mp6600lgr-z.lbr",
    "docs/hero.png",
    "docs/mp6600lgr-z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mp6600lgr-z-hero.glb",
    "mp6600lgr-z-hero.overlay.json"
  ],
  "component": {
    "mpn": "MP6600LGR-Z",
    "manufacturer": "MONOLITHIC POWER SYSTEMS INC.",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/91cd1217e7a82b2ef6cd9bcd4e9127c0.pdf",
    "parts": {
      "symbol": "mp6600lgr-z.kicad_sym",
      "footprint": "mp6600lgr-z.kicad_mod",
      "model_3d": "mp6600lgr-z-hero.glb",
      "model_3d_plain": "mp6600lgr-z.glb",
      "model_3d_step": "mp6600lgr-z-etched.step",
      "model_3d_step_plain": "mp6600lgr-z.step",
      "lbr": "mp6600lgr-z.lbr"
    },
    "distributor_links": {
      "lcsc": "C3681204",
      "digikey": "1589-MP6600LGR-ZTR-ND",
      "mouser": "946-MP6600LGR-Z"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T04:24:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1589-MP6600LGR-ZTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "946-MP6600LGR-Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DIR",
        "type": "input",
        "description": "Direction input that sets the direction of stepper motor rotation, with an internal pull-down resistor."
      },
      {
        "number": "2",
        "name": "nFAULT",
        "type": "output",
        "description": "Open-drain fault indication output that is driven low on a fault condition such as OCP, OTP or OVP."
      },
      {
        "number": "3",
        "name": "ISET",
        "type": "passive",
        "description": "Current set programming pin; a resistor from ISET to ground sets the motor current."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "5",
        "name": "ROSC",
        "type": "passive",
        "description": "Constant-off-time programming pin; a resistor from ROSC to ground sets the PWM off time."
      },
      {
        "number": "6",
        "name": "MS2",
        "type": "input",
        "description": "Mode selection input that sets the step mode together with MS1 (full, half, quarter or eighth step)."
      },
      {
        "number": "7",
        "name": "MS1",
        "type": "input",
        "description": "Mode selection input that sets the step mode together with MS2; it has an internal pull-down resistor."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "9",
        "name": "BOUT1",
        "type": "output",
        "description": "Bridge B output terminal 1."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; both VIN pins must be connected to the same supply and VIN must be decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "11",
        "name": "BOUT2",
        "type": "output",
        "description": "Bridge B output terminal 2."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "13",
        "name": "STEP",
        "type": "input",
        "description": "Step input; each rising edge advances the motor by one increment and it has an internal pull-down resistor."
      },
      {
        "number": "14",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge pump output; connect a 1µF, 16V, X7R ceramic capacitor from VCP to VIN."
      },
      {
        "number": "15",
        "name": "CP2",
        "type": "passive",
        "description": "Charge pump capacitor terminal; connect a 100nF, X7R ceramic capacitor rated for at least the VIN voltage between CP1 and CP2."
      },
      {
        "number": "16",
        "name": "CP1",
        "type": "passive",
        "description": "Charge pump capacitor terminal; connect a 100nF, X7R ceramic capacitor rated for at least the VIN voltage between CP1 and CP2."
      },
      {
        "number": "17",
        "name": "VG",
        "type": "power_out",
        "description": "Low-side MOSFET gate drive voltage; connect a 220nF, 16V, X7R ceramic capacitor from VG to ground."
      },
      {
        "number": "18",
        "name": "ENBL",
        "type": "input",
        "description": "Enable input; driving it low disables the bridge outputs and translator operation, and it has an internal pull-down resistor."
      },
      {
        "number": "19",
        "name": "nSLEEP",
        "type": "input",
        "description": "Sleep mode input; drive to logic high for normal operation, and it has an internal pull-down resistor."
      },
      {
        "number": "20",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "21",
        "name": "AOUT2",
        "type": "output",
        "description": "Bridge A output terminal 2."
      },
      {
        "number": "22",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage; both VIN pins must be connected to the same supply and VIN must be decoupled to ground with a minimum 100nF ceramic capacitor."
      },
      {
        "number": "23",
        "name": "AOUT1",
        "type": "output",
        "description": "Bridge A output terminal 1."
      },
      {
        "number": "24",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad (EP) is also GND per the pin table on page 3, but it is not a numbered pin, so it is"
        ],
        "pages_sent": 21,
        "cost_usd": 0.0288,
        "at": "2026-11-21T04:23:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/91cd1217e7a82b2ef6cd9bcd4e9127c0.pdf",
        "pages": 21,
        "sha256": "5d477fc1c0631eaa",
        "source_tier": "lcsc",
        "citation": "MONOLITHIC POWER SYSTEMS INC. datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mp6600lgr-z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mp6600lgr-z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "aab6375c97c6922f3a14d6d81e3c44ead89e045a4c9c7e12232a164243e511e7",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}