main
Ray
Publish 0.1.3
2a52173
MLX90372GDC-ACE-100-SP
Melexis · Angle, Linear Position Sensors · SOIC-8
MLX90372GDC-ACE-100-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications. |
| 2 | Input | input | Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. |
| 3 | Test | input | Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. |
| 4 | N.C. | unconnected | Not connected. |
| 5 | OUT | output | Digital output carrying the SENT or PWM signal of the sensor. |
| 6 | VSS | power_in | Digital ground of the device. |
| 7 | VDEC | passive | Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring. |
| 8 | VSS | power_in | Analog ground of the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (transient, <60s, TAMB≤35°C) | VDD | 37 | V | <60s; TAMB ≤ 35°C | 11 | ||
| Supply Voltage | VDD | 28 | V | <48h; Tj < 175°C | 11 | ||
| Reverse Voltage Protection | VDD-rev | -14 | V | <48h | 11 | ||
| Reverse Voltage Protection | VDD-rev | -20 | V | <1h | 11 | ||
| Positive Output Voltage | VOUT | 28 | V | <48h | 11 | ||
| Reverse Output Voltage | VOUT-rev | -14 | V | <48h | 11 | ||
| Internal Voltage | VDEC | 3.6 | V | 11 | |||
| Internal Voltage (reverse) | VDEC-rev | -0.3 | V | 11 | |||
| Positive Input pin Voltage | VInput | 6 | V | 11 | |||
| Reverse Input pin Voltage | VInput-rev | -3 | V | 11 | |||
| Positive Test pin Voltage | VTest | 3.6 | V | 11 | |||
| Reverse Test pin Voltage | VTest-rev | -0.3 | V | 11 | |||
| Operating Temperature | TAMB | -40 | 160 | °C | 11 | ||
| Junction Temperature | TJ | 175 | °C | see 18.17 for package thermal dissipation values | 11 | ||
| Magnetic Flux Density | Bmax | -1 | 1 | T | 11 | ||
| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |
| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage (4) | 12 |
| Supply Current | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 |
| Surge Current | Isurge | 30 | 40 | mA | IC Startup current (tstartup < 40µs) | 12 | |
| Start-up Level | VDDstart | 3.6 | V | Minimal supply start-up voltage | 12 | ||
| PTC Entry Level (rising) | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications (4) | 12 |
| PTC Entry Level Hysteresis | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 |
| PTC Entry Level (rising) | VPROV1 | 21.5 | 23 | 24.5 | V | For Battery usage (4) | 12 |
| PTC Entry Level Hysteresis | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For Battery usage (4) | 12 |
| Undervoltage detection high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V | Supply undervoltage high threshold | 12 |
| Undervoltage detection low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply undervoltage low threshold | 12 |
| Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |
| Regulated Voltage Overvoltage detection | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |
| Regulated Voltage Undervoltage detection | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |
| Regulated voltage UV / OV detection hysteresis | VDECOVHyst / VDECUVHyst | 100 | 150 | 200 | mV | 12 | |
| Digital supply | VDDD | 1.8 | 1.85 | 1.95 | V | 12 | |
| Digital supply Overvoltage detection | VDDDOVH | 2 | 2.1 | 2.2 | V | 12 | |
| Digital Supply Undervoltage detection | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |
| Digital Supply OV / UV detection Hysteresis | VPORHyst | 30 | 100 | 200 | mV | 12 | |
| Output Short Circuit Current (push-pull) | IOUTshortPP | -25 | -10 | mA | Push-pull modes (SENT, PWM), VOUT = 0 V | 13 | |
| Output Short Circuit Current (push-pull) | IOUTshortPP | 10 | 25 | mA | Push-pull modes (SENT, PWM), VOUT = 5 V .. 18V | 13 | |
| Output Short Circuit Current (open drain, SENT) | IOUTshortOD1 | 10 | 25 | mA | SENT Open Drain, VOUT = 5V | 13 | |
| Output Short Circuit Current (open drain, PWM) | IOUTshortOD2 | 25 | 90 | mA | PWM mode Open Drain only | 13 | |
| Output Load (PWM) | RL | 3 | kΩ | PWM pull-up to 5V, PWM pull-down to 0V | 13 | ||
| Output Load (SENT pull-up) | RL | 10 | 55 | kΩ | SENT pull-up | 13 | |
| Output Load (open drain pull-up) | RL | 1 | 100 | kΩ | Open drain pull-up | 13 | |
| Digital push-pull output level low | VsatLoPP | 0 | 1 | %VDD | RL ≥ 10kΩ | 13 | |
| Digital push-pull output level low | VsatLoPP | 2 | 5 | %VDD | RL ≥ 3kΩ, pull-up to 5V | 13 | |
| Digital push-pull output level high | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |
| Digital open drain output level low | VsatLoOD | 0 | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 | |
| Digital output Ron (push-pull) | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 |
| Main Clock Frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |
| Main Clock Frequency relative tolerance | ΔFCK | -5 | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 | |
| Main Clock Frequency Thermal Drift | ΔFCK,T | -2 | 2 | %Fck | Relative to clock frequency at 35°C. No ageing effects. | 14 | |
| Intelligent Watchdog Timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 |
| Absolute Watchdog Timeout | TAWD | 19 | 20 | 21 | ms | F1M = 1MHz | 14 |
| Fail Safe state duration (ACE/ADE) | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault; ACE / ADE versions | 14 |
| PWM Frequency | FPWM | 100 | 1000 | 2000 | Hz | 22 | |
| PWM Frequency Initial Tolerances | ΔFPWM,0 | -1.5 | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 | |
| PWM Frequency Drift | ΔFPWM | -5 | 5 | %FPWM | Over temperature and lifetime | 22 | |
| Magnetic Flux Density in X-Y plane (low field variant) | BX, BY | 25 | mT | sqrt(BX²+BY²); not the useful signal | 23 | ||
| Magnetic Flux Density in Z (low field variant) | BZ | 100 | mT | Not the useful signal | 23 | ||
| Magnetic in-plane gradient (low field variant) | ΔBX/ΔXY | 3.8 | 10 | mT/mm | Useful signal (see fig. 8) | 23 | |
| Magnet Temperature Coefficient (low field variant) | TCm | -2400 | 0 | ppm/°C | 23 | ||
| Field too Low Threshold (low field variant) | BTH_LOW | 0.8 | 1.2 | mT/mm | Typ is recommended value to be set by user | 23 | |
| Field too High Threshold (low field variant) | BTH_HIGH | 70 | 100 | 102 | mT/mm | Typ is recommended value to be set by user | 23 |
| XY - Intrinsic Linearity Error (nominal) | LE_XY | -1 | 1 | Deg. | Nominal performances, before EoL calibration | 29 | |
| XY - Total Drift (nominal) | ∂θTD_X | -0.85 | 0.85 | Deg. | Relative to 35°C | 29 |
CAD (KiCad official)
- Symbol:
MLX90372GDC-ACE-100-SP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx90372gdc-ace-100-sp-etched.step/mlx90372gdc-ace-100-sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90372gdc-ace-100-sp.step/mlx90372gdc-ace-100-sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (85 pp, sha256
2004e76042962923, retrieved 2026-11-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MLX90372GDC-ACE-100-SP
**Melexis** · Angle, Linear Position Sensors · SOIC-8
MLX90372GDC-ACE-100-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications. |
| 2 | Input | input | Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. |
| 3 | Test | input | Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. |
| 4 | N.C. | unconnected | Not connected. |
| 5 | OUT | output | Digital output carrying the SENT or PWM signal of the sensor. |
| 6 | VSS | power_in | Digital ground of the device. |
| 7 | VDEC | passive | Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring. |
| 8 | VSS | power_in | Analog ground of the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (transient, <60s, TAMB≤35°C) | VDD | | | 37 | V | <60s; TAMB ≤ 35°C | 11 |
| Supply Voltage | VDD | | | 28 | V | <48h; Tj < 175°C | 11 |
| Reverse Voltage Protection | VDD-rev | -14 | | | V | <48h | 11 |
| Reverse Voltage Protection | VDD-rev | -20 | | | V | <1h | 11 |
| Positive Output Voltage | VOUT | | | 28 | V | <48h | 11 |
| Reverse Output Voltage | VOUT-rev | -14 | | | V | <48h | 11 |
| Internal Voltage | VDEC | | | 3.6 | V | | 11 |
| Internal Voltage (reverse) | VDEC-rev | -0.3 | | | V | | 11 |
| Positive Input pin Voltage | VInput | | | 6 | V | | 11 |
| Reverse Input pin Voltage | VInput-rev | -3 | | | V | | 11 |
| Positive Test pin Voltage | VTest | | | 3.6 | V | | 11 |
| Reverse Test pin Voltage | VTest-rev | -0.3 | | | V | | 11 |
| Operating Temperature | TAMB | -40 | | 160 | °C | | 11 |
| Junction Temperature | TJ | | | 175 | °C | see 18.17 for package thermal dissipation values | 11 |
| Magnetic Flux Density | Bmax | -1 | | 1 | T | | 11 |
| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |
| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage (4) | 12 |
| Supply Current | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 |
| Surge Current | Isurge | | 30 | 40 | mA | IC Startup current (tstartup < 40µs) | 12 |
| Start-up Level | VDDstart | 3.6 | | | V | Minimal supply start-up voltage | 12 |
| PTC Entry Level (rising) | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications (4) | 12 |
| PTC Entry Level Hysteresis | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 |
| PTC Entry Level (rising) | VPROV1 | 21.5 | 23 | 24.5 | V | For Battery usage (4) | 12 |
| PTC Entry Level Hysteresis | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For Battery usage (4) | 12 |
| Undervoltage detection high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V | Supply undervoltage high threshold | 12 |
| Undervoltage detection low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply undervoltage low threshold | 12 |
| Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |
| Regulated Voltage Overvoltage detection | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |
| Regulated Voltage Undervoltage detection | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |
| Regulated voltage UV / OV detection hysteresis | VDECOVHyst / VDECUVHyst | 100 | 150 | 200 | mV | | 12 |
| Digital supply | VDDD | 1.8 | 1.85 | 1.95 | V | | 12 |
| Digital supply Overvoltage detection | VDDDOVH | 2 | 2.1 | 2.2 | V | | 12 |
| Digital Supply Undervoltage detection | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |
| Digital Supply OV / UV detection Hysteresis | VPORHyst | 30 | 100 | 200 | mV | | 12 |
| Output Short Circuit Current (push-pull) | IOUTshortPP | -25 | | -10 | mA | Push-pull modes (SENT, PWM), VOUT = 0 V | 13 |
| Output Short Circuit Current (push-pull) | IOUTshortPP | 10 | | 25 | mA | Push-pull modes (SENT, PWM), VOUT = 5 V .. 18V | 13 |
| Output Short Circuit Current (open drain, SENT) | IOUTshortOD1 | 10 | | 25 | mA | SENT Open Drain, VOUT = 5V | 13 |
| Output Short Circuit Current (open drain, PWM) | IOUTshortOD2 | 25 | | 90 | mA | PWM mode Open Drain only | 13 |
| Output Load (PWM) | RL | 3 | | | kΩ | PWM pull-up to 5V, PWM pull-down to 0V | 13 |
| Output Load (SENT pull-up) | RL | 10 | | 55 | kΩ | SENT pull-up | 13 |
| Output Load (open drain pull-up) | RL | 1 | | 100 | kΩ | Open drain pull-up | 13 |
| Digital push-pull output level low | VsatLoPP | 0 | | 1 | %VDD | RL ≥ 10kΩ | 13 |
| Digital push-pull output level low | VsatLoPP | 2 | | 5 | %VDD | RL ≥ 3kΩ, pull-up to 5V | 13 |
| Digital push-pull output level high | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |
| Digital open drain output level low | VsatLoOD | 0 | | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 |
| Digital output Ron (push-pull) | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 |
| Main Clock Frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |
| Main Clock Frequency relative tolerance | ΔFCK | -5 | | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 |
| Main Clock Frequency Thermal Drift | ΔFCK,T | -2 | | 2 | %Fck | Relative to clock frequency at 35°C. No ageing effects. | 14 |
| Intelligent Watchdog Timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 |
| Absolute Watchdog Timeout | TAWD | 19 | 20 | 21 | ms | F1M = 1MHz | 14 |
| Fail Safe state duration (ACE/ADE) | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault; ACE / ADE versions | 14 |
| PWM Frequency | FPWM | 100 | 1000 | 2000 | Hz | | 22 |
| PWM Frequency Initial Tolerances | ΔFPWM,0 | -1.5 | | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 |
| PWM Frequency Drift | ΔFPWM | -5 | | 5 | %FPWM | Over temperature and lifetime | 22 |
| Magnetic Flux Density in X-Y plane (low field variant) | BX, BY | | | 25 | mT | sqrt(BX²+BY²); not the useful signal | 23 |
| Magnetic Flux Density in Z (low field variant) | BZ | | | 100 | mT | Not the useful signal | 23 |
| Magnetic in-plane gradient (low field variant) | ΔBX/ΔXY | 3.8 | | 10 | mT/mm | Useful signal (see fig. 8) | 23 |
| Magnet Temperature Coefficient (low field variant) | TCm | -2400 | | 0 | ppm/°C | | 23 |
| Field too Low Threshold (low field variant) | BTH_LOW | 0.8 | 1.2 | | mT/mm | Typ is recommended value to be set by user | 23 |
| Field too High Threshold (low field variant) | BTH_HIGH | 70 | 100 | 102 | mT/mm | Typ is recommended value to be set by user | 23 |
| XY - Intrinsic Linearity Error (nominal) | LE_XY | -1 | | 1 | Deg. | Nominal performances, before EoL calibration | 29 |
| XY - Total Drift (nominal) | ∂θTD_X | -0.85 | | 0.85 | Deg. | Relative to 35°C | 29 |
## CAD (KiCad official)
- Symbol: `MLX90372GDC-ACE-100-SP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mlx90372gdc-ace-100-sp-etched.step` / `mlx90372gdc-ace-100-sp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mlx90372gdc-ace-100-sp.step` / `mlx90372gdc-ace-100-sp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Melexis datasheet](docs/mlx90372gdc-ace-100-sp-datasheet.pdf) (85 pp, sha256 `2004e76042962923`, retrieved 2026-11-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mlx90372gdc-ace-100-sp-datasheet.pdf)