← Commit history
README.md+45−41@@ -8,14 +8,14 @@ MLX90372GDC-ACE-100-SP from Melexis, in a SOIC-8. Pinout and pin descriptions ex | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD | power_in | Supply pin: 4.5 V to 5.5 V (typ. 5 V) for voltage-regulated mode, 6 V to 18 V for battery usage, with absolute maximum 28 V for under 48 h. |-| 2 | Input | input | Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour. |-| 3 | Test | input | Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour. |+| 1 | VDD | power_in | Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications. |+| 2 | Input | input | Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. |+| 3 | Test | input | Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour. | | 4 | N.C. | unconnected | Not connected. |-| 5 | OUT | output | Digital SENT or PWM output; the output stage is push-pull or open-drain depending on ABE_OUT_MODE, and the absolute maximum positive output voltage is 28 V for under 48 h. |-| 6 | VSS | power_in | Digital ground of the IC. |-| 7 | VDEC | passive | Decoupling pin for the internal analog regulated voltage, specified at 3.2 V to 3.4 V (typ. 3.3 V) with an absolute maximum of 3.6 V. |-| 8 | VSS | power_in | Analog ground of the IC. |+| 5 | OUT | output | Digital output carrying the SENT or PWM signal of the sensor. |+| 6 | VSS | power_in | Digital ground of the device. |+| 7 | VDEC | passive | Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring. |+| 8 | VSS | power_in | Analog ground of the device. | ## Key specifications @@ -32,65 +32,69 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage (absolute max, <48h) | VDD | | | 28 | V | < 48h ; Tj < 175°C | 11 |-| Supply Voltage (absolute max, <60s) | VDD | | | 37 | V | < 60s ; TAMB ≤ 35°C | 11 |-| Reverse Voltage Protection | VDD-rev | -14 | | | V | < 48h | 11 |-| Reverse Voltage Protection | VDD-rev | -20 | | | V | < 1h | 11 |-| Positive Output Voltage | VOUT | | | 28 | V | < 48h | 11 |-| Reverse Output Voltage | VOUT-rev | -14 | | | V | < 48h | 11 |+| Supply Voltage (transient, <60s, TAMB≤35°C) | VDD | | | 37 | V | <60s; TAMB ≤ 35°C | 11 |+| Supply Voltage | VDD | | | 28 | V | <48h; Tj < 175°C | 11 |+| Reverse Voltage Protection | VDD-rev | -14 | | | V | <48h | 11 |+| Reverse Voltage Protection | VDD-rev | -20 | | | V | <1h | 11 |+| Positive Output Voltage | VOUT | | | 28 | V | <48h | 11 |+| Reverse Output Voltage | VOUT-rev | -14 | | | V | <48h | 11 | | Internal Voltage | VDEC | | | 3.6 | V | | 11 |-| Reverse Internal Voltage | VDEC-rev | -0.3 | | | V | | 11 |+| Internal Voltage (reverse) | VDEC-rev | -0.3 | | | V | | 11 | | Positive Input pin Voltage | VInput | | | 6 | V | | 11 | | Reverse Input pin Voltage | VInput-rev | -3 | | | V | | 11 | | Positive Test pin Voltage | VTest | | | 3.6 | V | | 11 | | Reverse Test pin Voltage | VTest-rev | -0.3 | | | V | | 11 | | Operating Temperature | TAMB | -40 | | 160 | °C | | 11 | | Junction Temperature | TJ | | | 175 | °C | see 18.17 for package thermal dissipation values | 11 |-| Storage Temperature | TST | -55 | | 170 | °C | | 11 | | Magnetic Flux Density | Bmax | -1 | | 1 | T | | 11 |-| Supply Voltage (voltage regulated mode) | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |-| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage | 12 |-| Supply Current (rotary and linear stray field, -100) | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 |+| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | For voltage regulated mode | 12 |+| Supply Voltage Battery | VDD | 6 | 12 | 18 | V | For Battery usage (4) | 12 |+| Supply Current | IDD | 9 | 10.5 | 12.6 | mA | Rotary and linear stray field applications (option code -100, -200, -500) | 12 | | Surge Current | Isurge | | 30 | 40 | mA | IC Startup current (tstartup < 40µs) | 12 | | Start-up Level | VDDstart | 3.6 | | | V | Minimal supply start-up voltage | 12 | | PTC Entry Level (rising) | VPROV0 | 7.1 | 7.35 | 7.7 | V | Supply overvoltage detection for 5V applications (4) | 12 |+| PTC Entry Level Hysteresis | VPROV0Hyst | 400 | 500 | 600 | mV | Supply overvoltage hysteresis | 12 | | PTC Entry Level (rising) | VPROV1 | 21.5 | 23 | 24.5 | V | For Battery usage (4) | 12 |+| PTC Entry Level Hysteresis | VPROV1Hyst | 0.8 | 1.4 | 2 | V | For Battery usage (4) | 12 | | Undervoltage detection high threshold | VDDUVH | 3.95 | 4.1 | 4.25 | V | Supply undervoltage high threshold | 12 | | Undervoltage detection low threshold | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply undervoltage low threshold | 12 | | Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 12 |-| Regulated Voltage Overvoltage detection high threshold | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |-| Regulated Voltage Undervoltage detection low threshold | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |+| Regulated Voltage Overvoltage detection | VDECOVH | 3.65 | 3.75 | 3.85 | V | High threshold | 12 |+| Regulated Voltage Undervoltage detection | VDECUVL | 2.7 | 2.85 | 2.92 | V | Low threshold | 12 |+| Regulated voltage UV / OV detection hysteresis | VDECOVHyst / VDECUVHyst | 100 | 150 | 200 | mV | | 12 | | Digital supply | VDDD | 1.8 | 1.85 | 1.95 | V | | 12 |-| Digital Supply Undervoltage detection (Power-on reset low threshold) | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |-| Output Short Circuit Current (push-pull, VOUT = 0 V) | IOUTshortPP | -25 | | -10 | mA | Push-pull modes (SENT, PWM); VOUT = 0 V | 13 |-| Output Short Circuit Current (push-pull, VOUT = 5 V..18 V) | IOUTshortPP | 10 | | 25 | mA | Push-pull modes (SENT, PWM); VOUT = 5 V .. 18V | 13 |-| Output Short Circuit Current (SENT open drain) | IOUTshortOD1 | 10 | | 25 | mA | SENT Open Drain (see 13.1.1); VOUT = 5V | 13 |-| Output Short Circuit Current (PWM open drain) | IOUTshortOD2 | 25 | | 90 | mA | PWM mode Open Drain only (see 13.1.1) | 13 |+| Digital supply Overvoltage detection | VDDDOVH | 2 | 2.1 | 2.2 | V | | 12 |+| Digital Supply Undervoltage detection | VDDDUVL | 1.585 | 1.68 | 1.735 | V | Power-on Reset low threshold | 12 |+| Digital Supply OV / UV detection Hysteresis | VPORHyst | 30 | 100 | 200 | mV | | 12 |+| Output Short Circuit Current (push-pull) | IOUTshortPP | -25 | | -10 | mA | Push-pull modes (SENT, PWM), VOUT = 0 V | 13 |+| Output Short Circuit Current (push-pull) | IOUTshortPP | 10 | | 25 | mA | Push-pull modes (SENT, PWM), VOUT = 5 V .. 18V | 13 |+| Output Short Circuit Current (open drain, SENT) | IOUTshortOD1 | 10 | | 25 | mA | SENT Open Drain, VOUT = 5V | 13 |+| Output Short Circuit Current (open drain, PWM) | IOUTshortOD2 | 25 | | 90 | mA | PWM mode Open Drain only | 13 | | Output Load (PWM) | RL | 3 | | | kΩ | PWM pull-up to 5V, PWM pull-down to 0V | 13 | | Output Load (SENT pull-up) | RL | 10 | | 55 | kΩ | SENT pull-up | 13 | | Output Load (open drain pull-up) | RL | 1 | | 100 | kΩ | Open drain pull-up | 13 |-| Digital push-pull output low level | VsatLoPP | 0 | | 1 | %VDD | RL ≥ 10kΩ | 13 |-| Digital push-pull output low level | VsatLoPP | 2 | | 5 | %VDD | RL ≥ 3kΩ, pull-up to 5V | 13 |-| Digital push-pull output high level | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |-| Digital push-pull output high level | VsatHiPP | 95 | | 100 | %VDD | RL ≥ 3kΩ, pull-down | 13 |-| Digital open drain output low level | VsatLoOD | 0 | | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 |-| Digital output on-resistance (push-pull, ACC/ACE) | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 |+| Digital push-pull output level low | VsatLoPP | 0 | | 1 | %VDD | RL ≥ 10kΩ | 13 |+| Digital push-pull output level low | VsatLoPP | 2 | | 5 | %VDD | RL ≥ 3kΩ, pull-up to 5V | 13 |+| Digital push-pull output level high | VsatHiPP | 98 | 99 | 100 | %VDD | RL ≥ 10kΩ | 13 |+| Digital open drain output level low | VsatLoOD | 0 | | 10 | %Vext | Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA | 13 |+| Digital output Ron (push-pull) | Ron | 27 | 50 | 100 | Ω | ACC and ACE chip revision. Push-pull mode | 13 | | Main Clock Frequency | FCK | 22.8 | 24 | 25.2 | MHz | Including thermal and lifetime drift | 14 |-| Main Clock relative tolerance | | -5 | | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 |-| Main Clock initial tolerance | ΔFCK,0 | 23.75 | 24 | 24.25 | MHz | T=35°C | 14 |+| Main Clock Frequency relative tolerance | ΔFCK | -5 | | 5 | %Fck | Relative tolerances, including thermal and lifetime drift | 14 | | Main Clock Frequency Thermal Drift | ΔFCK,T | -2 | | 2 | %Fck | Relative to clock frequency at 35°C. No ageing effects. | 14 | | Intelligent Watchdog Timeout | TIWD | 19 | 20 | 21 | ms | FCK = 24MHz | 14 | | Absolute Watchdog Timeout | TAWD | 19 | 20 | 21 | ms | F1M = 1MHz | 14 | | Fail Safe state duration (ACE/ADE) | TFSS | 9.8 | 11 | 11.9 | ms | After a digital single-event fault; ACE / ADE versions | 14 |-| Safe Startup Time | TSafeStup | | 11.2 | 12.4 | ms | Only valid for ACE / ADE versions (see. 7.3.1.2) | 14 |-| Internal Angle Measurement Period | TangleMeas | 528 | 588 | | μs | Typical is default factory settings (no user control) | 15 |-| SENT Frame Tick Count (asynchronous) | NTframe | 282 | | | ticks | Do not change for asynchronous mode (see chap.12, T_FRAME) | 15 | | PWM Frequency | FPWM | 100 | 1000 | 2000 | Hz | | 22 |-| PWM Frequency Initial Tolerance | ΔFPWM,0 | -1.5 | | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 |-| PWM Frequency Thermal Drift | ΔFPWM,T | -2 | | 2 | %FPWM | | 22 |+| PWM Frequency Initial Tolerances | ΔFPWM,0 | -1.5 | | 1.5 | %FPWM | T=35°C, can be trimmed at EOL | 22 | | PWM Frequency Drift | ΔFPWM | -5 | | 5 | %FPWM | Over temperature and lifetime | 22 |-| Rise Time PWM | | 1 | 4.8 | 12 | μs | typ. for SENT_SEL_SR_RISE/FALL = 4 (see 11.1.6). Measured between 1.1V and 3.8V | 22 |-| Fall Time PWM | | 1 | 4.8 | 12 | μs | | 22 |+| Magnetic Flux Density in X-Y plane (low field variant) | BX, BY | | | 25 | mT | sqrt(BX²+BY²); not the useful signal | 23 |+| Magnetic Flux Density in Z (low field variant) | BZ | | | 100 | mT | Not the useful signal | 23 |+| Magnetic in-plane gradient (low field variant) | ΔBX/ΔXY | 3.8 | | 10 | mT/mm | Useful signal (see fig. 8) | 23 |+| Magnet Temperature Coefficient (low field variant) | TCm | -2400 | | 0 | ppm/°C | | 23 |+| Field too Low Threshold (low field variant) | BTH_LOW | 0.8 | 1.2 | | mT/mm | Typ is recommended value to be set by user | 23 |+| Field too High Threshold (low field variant) | BTH_HIGH | 70 | 100 | 102 | mT/mm | Typ is recommended value to be set by user | 23 |+| XY - Intrinsic Linearity Error (nominal) | LE_XY | -1 | | 1 | Deg. | Nominal performances, before EoL calibration | 29 |+| XY - Total Drift (nominal) | ∂θTD_X | -0.85 | | 0.85 | Deg. | Relative to 35°C | 29 | ## CAD (KiCad official) @@ -103,7 +107,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Melexis datasheet](docs/mlx90372gdc-ace-100-sp-datasheet.pdf) (85 pp, sha256 `2004e76042962923`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [Melexis datasheet](docs/mlx90372gdc-ace-100-sp-datasheet.pdf) (85 pp, sha256 `2004e76042962923`, retrieved 2026-11-17, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+16−16@@ -1,6 +1,6 @@ { "slug": "mlx90372gdc-ace-100-sp",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "482-90372GDCACE100SP" }, "distributor_check": {- "checked_at": "2026-11-12T23:51:31Z",+ "checked_at": "2026-11-17T17:48:41Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MLX90372GDC-ACE-100-SP-ND",@@ -69,19 +69,19 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Supply pin: 4.5 V to 5.5 V (typ. 5 V) for voltage-regulated mode, 6 V to 18 V for battery usage, with absolute maximum 28 V for under 48 h."+ "description": "Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications." }, { "number": "2", "name": "Input", "type": "input",- "description": "Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour."+ "description": "Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour." }, { "number": "3", "name": "Test", "type": "input",- "description": "Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour."+ "description": "Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour." }, { "number": "4",@@ -93,25 +93,25 @@ "number": "5", "name": "OUT", "type": "output",- "description": "Digital SENT or PWM output; the output stage is push-pull or open-drain depending on ABE_OUT_MODE, and the absolute maximum positive output voltage is 28 V for under 48 h."+ "description": "Digital output carrying the SENT or PWM signal of the sensor." }, { "number": "6", "name": "VSS", "type": "power_in",- "description": "Digital ground of the IC."+ "description": "Digital ground of the device." }, { "number": "7", "name": "VDEC", "type": "passive",- "description": "Decoupling pin for the internal analog regulated voltage, specified at 3.2 V to 3.4 V (typ. 3.3 V) with an absolute maximum of 3.6 V."+ "description": "Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring." }, { "number": "8", "name": "VSS", "type": "power_in",- "description": "Analog ground of the IC."+ "description": "Analog ground of the device." } ], "provenance": {@@ -125,11 +125,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN ends in '-SP', which does not appear in the datasheet ordering format. The datasheet's order; The datasheet gives only short functional descriptions for pins 2 (Input), 3 (Test) and 4 (N.C.). Th; Pin 6 and pin 8 are both VSS (digital ground and analog ground respectively) and both are listed as "+ "extractor flagged: The datasheet describes Input and Test only as 'For test or Application' with no electrical limits; ; The datasheet gives VDEC only as a decoupling pin; the description reflects the recommended wiring o; Pin descriptions were kept to the page 9 pin table; the supply and output limits in the datasheet (p" ], "pages_sent": 85,- "cost_usd": 0.2682,- "at": "2026-11-12T23:51:12"+ "cost_usd": 0.2737,+ "at": "2026-11-17T17:48:07" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/ad25e7c7470e92fbf32d080c1102a1fe.pdf",@@ -166,7 +166,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",- "checked": "2026-11-12",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -184,13 +184,13 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "9d4dbc41b92c22e62234d2579173997ba480df7ad2f7f19e9090d11149a40e7d",- "checked": "2026-11-12",+ "sha256": "0ba7c4210cadc258958076f7164696d702e4e5183e79e9822c31e2e4e4ef416f",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SOIC-8 (code DC)",+ "package_code": "SOIC-8 (package code DC)", "source_page": 70, "D": { "nom_mm": 4.89,
page.json+19−17@@ -4,7 +4,7 @@ "slug": "mlx90372gdc-ace-100-sp", "title": "MLX90372GDC-ACE-100-SP", "brief": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "482-90372GDCACE100SP" }, "distributor_check": {- "checked_at": "2026-11-12T23:51:31Z",+ "checked_at": "2026-11-17T17:48:41Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MLX90372GDC-ACE-100-SP-ND",@@ -52,19 +52,19 @@ "number": "1", "name": "VDD", "type": "power_in",- "description": "Supply pin: 4.5 V to 5.5 V (typ. 5 V) for voltage-regulated mode, 6 V to 18 V for battery usage, with absolute maximum 28 V for under 48 h."+ "description": "Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications." }, { "number": "2", "name": "Input", "type": "input",- "description": "Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour."+ "description": "Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour." }, { "number": "3", "name": "Test", "type": "input",- "description": "Pin for test or application use; it is internally grounded in application, so unused pins should be connected to PCB ground for optimal EMC behaviour."+ "description": "Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour." }, { "number": "4",@@ -76,25 +76,25 @@ "number": "5", "name": "OUT", "type": "output",- "description": "Digital SENT or PWM output; the output stage is push-pull or open-drain depending on ABE_OUT_MODE, and the absolute maximum positive output voltage is 28 V for under 48 h."+ "description": "Digital output carrying the SENT or PWM signal of the sensor." }, { "number": "6", "name": "VSS", "type": "power_in",- "description": "Digital ground of the IC."+ "description": "Digital ground of the device." }, { "number": "7", "name": "VDEC", "type": "passive",- "description": "Decoupling pin for the internal analog regulated voltage, specified at 3.2 V to 3.4 V (typ. 3.3 V) with an absolute maximum of 3.6 V."+ "description": "Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring." }, { "number": "8", "name": "VSS", "type": "power_in",- "description": "Analog ground of the IC."+ "description": "Analog ground of the device." } ], "provenance": {@@ -108,11 +108,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN ends in '-SP', which does not appear in the datasheet ordering format. The datasheet's order; The datasheet gives only short functional descriptions for pins 2 (Input), 3 (Test) and 4 (N.C.). Th; Pin 6 and pin 8 are both VSS (digital ground and analog ground respectively) and both are listed as "+ "extractor flagged: The datasheet describes Input and Test only as 'For test or Application' with no electrical limits; ; The datasheet gives VDEC only as a decoupling pin; the description reflects the recommended wiring o; Pin descriptions were kept to the page 9 pin table; the supply and output limits in the datasheet (p" ], "pages_sent": 85,- "cost_usd": 0.2682,- "at": "2026-11-12T23:51:12"+ "cost_usd": 0.2737,+ "at": "2026-11-17T17:48:07" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/ad25e7c7470e92fbf32d080c1102a1fe.pdf",@@ -149,7 +149,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",- "checked": "2026-11-12",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -167,13 +167,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "9d4dbc41b92c22e62234d2579173997ba480df7ad2f7f19e9090d11149a40e7d",- "checked": "2026-11-12",+ "sha256": "0ba7c4210cadc258958076f7164696d702e4e5183e79e9822c31e2e4e4ef416f",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SOIC-8 (code DC)",+ "package_code": "SOIC-8 (package code DC)", "source_page": 70, "D": { "nom_mm": 4.89,@@ -982,5 +982,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Melexis Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }