main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mlx90372gdc-ace-100-sp: factory component page (tier=lcsc) · Ray
viewers mlx90372gdc-ace-100-sp: viewers · Ray
mlx90372gdc-ace-100-sp-etched.glb Publish 0.1.0 · Ray
mlx90372gdc-ace-100-sp-etched.step mlx90372gdc-ace-100-sp: factory component page (tier=lcsc) · Ray
mlx90372gdc-ace-100-sp-hero.glb mlx90372gdc-ace-100-sp: hero GLB from the etched model (keeps the MPN mark) · Ray
mlx90372gdc-ace-100-sp-hero.overlay.json Publish 0.1.1 · Ray
mlx90372gdc-ace-100-sp.glb Publish 0.1.0 · Ray
mlx90372gdc-ace-100-sp.kicad_mod Publish 0.1.0 · Ray
mlx90372gdc-ace-100-sp.kicad_sym Publish 0.1.1 · Ray
mlx90372gdc-ace-100-sp.lbr Publish 0.1.1 · Ray
mlx90372gdc-ace-100-sp.step Publish 0.1.0 · Ray
package.json Publish 0.1.3 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.3 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 8 pins · Ray

MLX90372GDC-ACE-100-SP

Melexis · Angle, Linear Position Sensors · SOIC-8

MLX90372GDC-ACE-100-SP from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply pin for the sensor, with 4.5 V to 5.5 V for voltage-regulated mode and 6 V to 18 V for battery usage as stated in the electrical specifications.
2 Input input Input pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour.
3 Test input Test pin for test or application use; it is internally grounded in the application and unused pins should be connected to PCB ground for optimal EMC behaviour.
4 N.C. unconnected Not connected.
5 OUT output Digital output carrying the SENT or PWM signal of the sensor.
6 VSS power_in Digital ground of the device.
7 VDEC passive Decoupling pin for the internal regulated voltage, which requires the external decoupling capacitors shown in the recommended wiring.
8 VSS power_in Analog ground of the device.

Key specifications

Parameter Value
Manufacturer Melexis
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (transient, <60s, TAMB≤35°C) VDD 37 V <60s; TAMB ≤ 35°C 11
Supply Voltage VDD 28 V <48h; Tj < 175°C 11
Reverse Voltage Protection VDD-rev -14 V <48h 11
Reverse Voltage Protection VDD-rev -20 V <1h 11
Positive Output Voltage VOUT 28 V <48h 11
Reverse Output Voltage VOUT-rev -14 V <48h 11
Internal Voltage VDEC 3.6 V 11
Internal Voltage (reverse) VDEC-rev -0.3 V 11
Positive Input pin Voltage VInput 6 V 11
Reverse Input pin Voltage VInput-rev -3 V 11
Positive Test pin Voltage VTest 3.6 V 11
Reverse Test pin Voltage VTest-rev -0.3 V 11
Operating Temperature TAMB -40 160 °C 11
Junction Temperature TJ 175 °C see 18.17 for package thermal dissipation values 11
Magnetic Flux Density Bmax -1 1 T 11
Supply Voltage VDD 4.5 5 5.5 V For voltage regulated mode 12
Supply Voltage Battery VDD 6 12 18 V For Battery usage (4) 12
Supply Current IDD 9 10.5 12.6 mA Rotary and linear stray field applications (option code -100, -200, -500) 12
Surge Current Isurge 30 40 mA IC Startup current (tstartup < 40µs) 12
Start-up Level VDDstart 3.6 V Minimal supply start-up voltage 12
PTC Entry Level (rising) VPROV0 7.1 7.35 7.7 V Supply overvoltage detection for 5V applications (4) 12
PTC Entry Level Hysteresis VPROV0Hyst 400 500 600 mV Supply overvoltage hysteresis 12
PTC Entry Level (rising) VPROV1 21.5 23 24.5 V For Battery usage (4) 12
PTC Entry Level Hysteresis VPROV1Hyst 0.8 1.4 2 V For Battery usage (4) 12
Undervoltage detection high threshold VDDUVH 3.95 4.1 4.25 V Supply undervoltage high threshold 12
Undervoltage detection low threshold VDDUVL 3.75 3.9 4.05 V Supply undervoltage low threshold 12
Regulated Voltage VDEC 3.2 3.3 3.4 V Internal analog voltage 12
Regulated Voltage Overvoltage detection VDECOVH 3.65 3.75 3.85 V High threshold 12
Regulated Voltage Undervoltage detection VDECUVL 2.7 2.85 2.92 V Low threshold 12
Regulated voltage UV / OV detection hysteresis VDECOVHyst / VDECUVHyst 100 150 200 mV 12
Digital supply VDDD 1.8 1.85 1.95 V 12
Digital supply Overvoltage detection VDDDOVH 2 2.1 2.2 V 12
Digital Supply Undervoltage detection VDDDUVL 1.585 1.68 1.735 V Power-on Reset low threshold 12
Digital Supply OV / UV detection Hysteresis VPORHyst 30 100 200 mV 12
Output Short Circuit Current (push-pull) IOUTshortPP -25 -10 mA Push-pull modes (SENT, PWM), VOUT = 0 V 13
Output Short Circuit Current (push-pull) IOUTshortPP 10 25 mA Push-pull modes (SENT, PWM), VOUT = 5 V .. 18V 13
Output Short Circuit Current (open drain, SENT) IOUTshortOD1 10 25 mA SENT Open Drain, VOUT = 5V 13
Output Short Circuit Current (open drain, PWM) IOUTshortOD2 25 90 mA PWM mode Open Drain only 13
Output Load (PWM) RL 3 kΩ PWM pull-up to 5V, PWM pull-down to 0V 13
Output Load (SENT pull-up) RL 10 55 kΩ SENT pull-up 13
Output Load (open drain pull-up) RL 1 100 kΩ Open drain pull-up 13
Digital push-pull output level low VsatLoPP 0 1 %VDD RL ≥ 10kΩ 13
Digital push-pull output level low VsatLoPP 2 5 %VDD RL ≥ 3kΩ, pull-up to 5V 13
Digital push-pull output level high VsatHiPP 98 99 100 %VDD RL ≥ 10kΩ 13
Digital open drain output level low VsatLoOD 0 10 %Vext Pull-up to any external voltage Vext ≤ 18V, IL ≤ 3.4mA 13
Digital output Ron (push-pull) Ron 27 50 100 Ω ACC and ACE chip revision. Push-pull mode 13
Main Clock Frequency FCK 22.8 24 25.2 MHz Including thermal and lifetime drift 14
Main Clock Frequency relative tolerance ΔFCK -5 5 %Fck Relative tolerances, including thermal and lifetime drift 14
Main Clock Frequency Thermal Drift ΔFCK,T -2 2 %Fck Relative to clock frequency at 35°C. No ageing effects. 14
Intelligent Watchdog Timeout TIWD 19 20 21 ms FCK = 24MHz 14
Absolute Watchdog Timeout TAWD 19 20 21 ms F1M = 1MHz 14
Fail Safe state duration (ACE/ADE) TFSS 9.8 11 11.9 ms After a digital single-event fault; ACE / ADE versions 14
PWM Frequency FPWM 100 1000 2000 Hz 22
PWM Frequency Initial Tolerances ΔFPWM,0 -1.5 1.5 %FPWM T=35°C, can be trimmed at EOL 22
PWM Frequency Drift ΔFPWM -5 5 %FPWM Over temperature and lifetime 22
Magnetic Flux Density in X-Y plane (low field variant) BX, BY 25 mT sqrt(BX²+BY²); not the useful signal 23
Magnetic Flux Density in Z (low field variant) BZ 100 mT Not the useful signal 23
Magnetic in-plane gradient (low field variant) ΔBX/ΔXY 3.8 10 mT/mm Useful signal (see fig. 8) 23
Magnet Temperature Coefficient (low field variant) TCm -2400 0 ppm/°C 23
Field too Low Threshold (low field variant) BTH_LOW 0.8 1.2 mT/mm Typ is recommended value to be set by user 23
Field too High Threshold (low field variant) BTH_HIGH 70 100 102 mT/mm Typ is recommended value to be set by user 23
XY - Intrinsic Linearity Error (nominal) LE_XY -1 1 Deg. Nominal performances, before EoL calibration 29
XY - Total Drift (nominal) ∂θTD_X -0.85 0.85 Deg. Relative to 35°C 29

CAD (KiCad official)

  • Symbol: MLX90372GDC-ACE-100-SP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mlx90372gdc-ace-100-sp-etched.step / mlx90372gdc-ace-100-sp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90372gdc-ace-100-sp.step / mlx90372gdc-ace-100-sp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (85 pp, sha256 2004e76042962923, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF