MKDV16GCL-STP

{
  "slug": "mkdv16gcl-stp",
  "version": "0.1.0",
  "type": "component",
  "description": "MK NAND FLASH, LGA-8(6.6x8). Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "mkdv16gcl-stp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mkdv16gcl-stp.kicad_sym",
    "mkdv16gcl-stp.kicad_mod",
    "mkdv16gcl-stp.glb",
    "mkdv16gcl-stp.step",
    "mkdv16gcl-stp.lbr",
    "docs/hero.png",
    "docs/mkdv16gcl-stp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "MKDV16GCL-STP",
    "manufacturer": "MK",
    "package": "LGA-8(6.6x8)",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NAND FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603011609124495360",
    "parts": {
      "symbol": "mkdv16gcl-stp.kicad_sym",
      "footprint": "mkdv16gcl-stp.kicad_mod",
      "model_3d": "mkdv16gcl-stp-etched.glb",
      "model_3d_plain": "mkdv16gcl-stp.glb",
      "model_3d_step": "mkdv16gcl-stp-etched.step",
      "model_3d_step_plain": "mkdv16gcl-stp.step",
      "lbr": "mkdv16gcl-stp.lbr"
    },
    "distributor_links": {
      "lcsc": "C19192127"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T18:52:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DAT2",
        "type": "bidirectional",
        "description": "SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 k\u03a9) even in 1-bit SD mode."
      },
      {
        "number": "2",
        "name": "DAT3",
        "type": "bidirectional",
        "description": "SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 k\u03a9 pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42."
      },
      {
        "number": "3",
        "name": "CLK",
        "type": "input",
        "description": "Host clock input; supports up to 50 MHz; should be driven to logic 0 during power-down to prevent current draw through signal lines."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Supply voltage ground reference (VSS); common ground for all signal and power circuitry."
      },
      {
        "number": "5",
        "name": "CMD",
        "type": "bidirectional",
        "description": "Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 k\u03a9)."
      },
      {
        "number": "6",
        "name": "DAT0",
        "type": "bidirectional",
        "description": "SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."
      },
      {
        "number": "7",
        "name": "DAT1",
        "type": "bidirectional",
        "description": "SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 k\u03a9)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 \u00b5F capacitor."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603011609124495360",
        "pages": 21,
        "sha256": "d21400e090b98897",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}