component
MKDV16GCL-STP
Public Made by Adomby adom
MK NAND FLASH, LGA-8(6.6x8). Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMKDV16GCL-STP
MK · NAND FLASH · LGA-8(6.6x8)
MKDV16GCL-STP from MK, in a LGA-8(6.6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DAT2 | bidirectional | SD data line bit 2 (I/O push-pull in SD mode); reserved in SPI mode; host must pull up via RDAT (10 k-100 kΩ) even in 1-bit SD mode. |
| 2 | DAT3 | bidirectional | SD data line bit 3 (I/O push-pull in SD mode); active-low chip select (CS#) in SPI mode; carries internal 10-90 kΩ pull-up (RDAT3) for mode selection and card detection, disconnectable via ACMD42. |
| 3 | CLK | input | Host clock input; supports up to 50 MHz; should be driven to logic 0 during power-down to prevent current draw through signal lines. |
| 4 | GND | power_in | Supply voltage ground reference (VSS); common ground for all signal and power circuitry. |
| 5 | CMD | bidirectional | Bidirectional command/response line (push-pull); host sends addressed or broadcast commands, card returns responses; data input (DI) in SPI mode; pull up via RCMD (10 k-100 kΩ). |
| 6 | DAT0 | bidirectional | SD data line bit 0 (I/O push-pull); default single-bit data path after power-up; data output (DO) in SPI mode; pull up via RDAT (10 k-100 kΩ). |
| 7 | DAT1 | bidirectional | SD data line bit 1 (I/O push-pull in SD mode); acts as input on power-up until SET_BUS_WIDTH is issued; reserved in SPI mode; pull up via RDAT (10 k-100 kΩ). |
| 8 | VDD | power_in | Supply voltage 2.7 V to 3.6 V (nominally 3.3 V); standby current max 0.25 mA at 3.6 V/25 MHz, operating write current max 30 mA at 3.3 V/25 MHz; decouple with 2.2 µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MK |
| Package | LGA-8(6.6x8) |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MKDV16GCL-STP - Footprint:
Package_LGA:LGA-8_8x6.2mm_P1.27mm - 3D model: LGA-8(6.6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal LGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mkdv16gcl-stp-etched.step/mkdv16gcl-stp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkdv16gcl-stp.step/mkdv16gcl-stp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MK datasheet (21 pp, sha256
d21400e090b98897, retrieved 2026-10-01, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).