Generated by kicad-footprint-generator · KiCad file format 20260206
MIC39372S
HGSEMI · Linear Voltage Regulators (LDO) · TO-263-5
MIC39372S from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | LDO regulated output; the output is set from 5V to 16V by external resistors R1 and R2 and needs a minimum 22uF tantalum capacitor with ESR between 0.01Ω and 5Ω for loop stability. |
| 2 | IN | power_in | Unregulated input supply; the normal operating input voltage is 16V maximum and the absolute maximum input voltage is 20V. |
| 3 | GND | power_in | Ground pin for the regulator. |
| 4 | ON/OFF | input | TTL/CMOS compatible enable; a voltage below 0.8V keeps the output on and above 2.0V turns it off, with no internal pull-up or pull-down so it must be tied to GND if unused. |
| 5 | ADJUST | output | Adjust pin for setting the output voltage through the external resistor divider R1 and R2, with VREF typically 1.275V. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 | VOUT | 1.211 | 1.275 | 1.339 | V | 5mA≤lo≤750mA | 4 |
| 漏失电压 | VDrop | 0.5 | 1 | V | lo=750mA | 4 | |
| 漏失电压 | VDrop | 110 | 200 | mV | lo=100mA | 4 | |
| ON 阈值 | Von | 0.7 | 0.8 | V | lo≤750mA | 4 | |
| OFF 阈值 | VOff | 1.9 | 2 | V | lo≤750mA | 4 | |
| 静态电压 | ICC | 10 | 20 | mA | VO+2V≤VIN≤16V,lo=5mA | 4 | |
| 静态电压 | ICC | 35 | 60 | mA | VIN=VO+5V,lo=750mA | 4 | |
| 线性调整率 | VRLINE | 4 | 10 | mV | VO+2V≤VIN≤16V,lo=5mA | 4 | |
| 负载调整率 | VRLOAD | 7 | 15 | mV | 50mA≤lo≤750mA | 4 | |
| 短路电流 | Ishort | 1.6 | 1.9 | A | VinMax=20V | 4 | |
| 最大工作电压 | VinMax | 26 | 31 | V | 4 | ||
| ON/OFF 端电流 | 50 | 300 | uA | VON/OFF=2.0V,lo≤750mA | 4 | ||
| 输出阻抗 | VOR | 7 | mΩ/V | 100mADC and 20 mArms,f=120Hz | 4 | ||
| RMS 噪声 | Noise | 0.003 | % | 10Hz-100KHz,lo=5mA | 4 | ||
| 输入电压 | VIN | 16 | V | 3 | |||
| 工作结温范围 | TJ | -40 | 125 | °C | 3 | ||
| 输入电源电压 | VIN | 20 | V | 3 | |||
| 引脚温度(焊接 10 秒)TO-263/TO-220 | TLEAD | 245 | °C | 焊接10秒 | 3 | ||
| 工作结温范围 | TJ | 150 | °C | 3 | |||
| 存储温度范围 | Tstg | -65 | 150 | °C | 3 | ||
| ESD(人体模式) | ESD | 2000 | V | 人体模式 | 3 | ||
| ESD(机器模式) | ESD | 300 | V | 机器模式 | 3 | ||
| 热阻 TO-263-5L | θJA | 60 | °C/W | TO-263-5L | 3 |
CAD (KiCad official)
- Symbol:
MIC39372S - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic39372s-etched.step/mic39372s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic39372s.step/mic39372s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
ec15d4653972bbf9, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).