main
Ray Publish 0.1.1 f15ff20
{
  "schema_version": 1,
  "type": "component",
  "slug": "mic39372s",
  "title": "MIC39372S",
  "brief": "HGSEMI Linear Voltage Regulators (LDO), TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "mic39372s",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MIC39372S",
    "manufacturer": "HGSEMI",
    "package": "TO-263-5",
    "pin_count": 6,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3e89f7dfb6a0d6e20f2becaa18640032.pdf",
    "parts": {
      "symbol": "mic39372s.kicad_sym",
      "footprint": "mic39372s.kicad_mod",
      "model_3d": "mic39372s-hero.glb",
      "model_3d_plain": "mic39372s.glb",
      "model_3d_step": "mic39372s-etched.step",
      "model_3d_step_plain": "mic39372s.step",
      "lbr": "mic39372s.lbr"
    },
    "distributor_links": {
      "lcsc": "C3007943"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T15:15:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "LDO regulated output; the output is set from 5V to 16V by external resistors R1 and R2 and needs a minimum 22uF tantalum capacitor with ESR between 0.01Ω and 5Ω for loop stability."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input supply; the normal operating input voltage is 16V maximum and the absolute maximum input voltage is 20V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the regulator."
      },
      {
        "number": "4",
        "name": "ON/OFF",
        "type": "input",
        "description": "TTL/CMOS compatible enable; a voltage below 0.8V keeps the output on and above 2.0V turns it off, with no internal pull-up or pull-down so it must be tied to GND if unused."
      },
      {
        "number": "5",
        "name": "ADJUST",
        "type": "output",
        "description": "Adjust pin for setting the output voltage through the external resistor divider R1 and R2, with VREF typically 1.275V."
      },
      {
        "number": "6",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin diagram on page 4 is an image and was not extractable. The pin table on page 4 is not labell"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0093,
        "at": "2026-11-05T15:15:15"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3e89f7dfb6a0d6e20f2becaa18640032.pdf",
        "pages": 13,
        "sha256": "ec15d4653972bbf9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic39372s.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15,
          10,
          4.42
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic39372s-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15,
          10,
          4.42
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f452e0cfaf5cb7f3c58cbbc335f7691f76c5e9eddd48a7c8643a5d56e10be973",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "HGSEMI",
      "Package": "TO-263-5",
      "Category": "Power Supply Chip",
      "Pins": "6"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "ec15d4653972bbf9f8e5fe145e79ebda069ecbee02a6fc820af29f40b2d5bb64",
      "rows": [
        {
          "name": "输入电压",
          "symbol": "VOUT",
          "kind": "electrical",
          "unit": "V",
          "min": 1.211,
          "typ": 1.275,
          "max": 1.339,
          "conditions": "5mA≤lo≤750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "漏失电压",
          "symbol": "VDrop",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.5,
          "max": 1,
          "conditions": "lo=750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "漏失电压",
          "symbol": "VDrop",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 110,
          "max": 200,
          "conditions": "lo=100mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ON 阈值",
          "symbol": "Von",
          "kind": "electrical",
          "unit": "V",
          "min": 0.7,
          "typ": null,
          "max": 0.8,
          "conditions": "lo≤750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "OFF 阈值",
          "symbol": "VOff",
          "kind": "electrical",
          "unit": "V",
          "min": 1.9,
          "typ": null,
          "max": 2,
          "conditions": "lo≤750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "静态电压",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "VO+2V≤VIN≤16V,lo=5mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "静态电压",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 35,
          "max": 60,
          "conditions": "VIN=VO+5V,lo=750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "线性调整率",
          "symbol": "VRLINE",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 4,
          "max": 10,
          "conditions": "VO+2V≤VIN≤16V,lo=5mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "负载调整率",
          "symbol": "VRLOAD",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 7,
          "max": 15,
          "conditions": "50mA≤lo≤750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "短路电流",
          "symbol": "Ishort",
          "kind": "electrical",
          "unit": "A",
          "min": null,
          "typ": 1.6,
          "max": 1.9,
          "conditions": "VinMax=20V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "最大工作电压",
          "symbol": "VinMax",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 26,
          "max": 31,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ON/OFF 端电流",
          "symbol": "",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": 50,
          "max": 300,
          "conditions": "VON/OFF=2.0V,lo≤750mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "输出阻抗",
          "symbol": "VOR",
          "kind": "electrical",
          "unit": "mΩ/V",
          "min": null,
          "typ": 7,
          "max": null,
          "conditions": "100mADC and 20 mArms,f=120Hz",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "RMS 噪声",
          "symbol": "Noise",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": 0.003,
          "max": null,
          "conditions": "10Hz-100KHz,lo=5mA",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "输入电压",
          "symbol": "VIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 16,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "工作结温范围",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "输入电源电压",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "引脚温度(焊接 10 秒)TO-263/TO-220",
          "symbol": "TLEAD",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 245,
          "conditions": "焊接10秒",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "工作结温范围",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "存储温度范围",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ESD(人体模式)",
          "symbol": "ESD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 2000,
          "conditions": "人体模式",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ESD(机器模式)",
          "symbol": "ESD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "机器模式",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "热阻 TO-263-5L",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 60,
          "max": null,
          "conditions": "TO-263-5L",
          "source_page": 3,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mic39372s"
  ],
  "discovery_pitch": "MIC39372S (HGSEMI) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic39372s.kicad_sym",
    "mic39372s.kicad_mod",
    "mic39372s.glb",
    "mic39372s.step",
    "mic39372s.lbr",
    "docs/hero.png",
    "docs/mic39372s-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic39372s-hero.glb",
    "mic39372s-hero.overlay.json",
    "mic39372s-etched.glb",
    "mic39372s-etched.step"
  ],
  "visibility": "public",
  "description": "HGSEMI Linear Voltage Regulators (LDO), TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}