main
History Download
Ray Publish 0.1.0 9432620

MIC39372S

HGSEMI · Linear Voltage Regulators (LDO) · TO-263-5

MIC39372S from HGSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out LDO regulated output; the output is set from 5V to 16V by external resistors R1 and R2 and needs a minimum 22uF tantalum capacitor with ESR between 0.01Ω and 5Ω for loop stability.
2 IN power_in Unregulated input supply; the normal operating input voltage is 16V maximum and the absolute maximum input voltage is 20V.
3 GND power_in Ground pin for the regulator.
4 ON/OFF input TTL/CMOS compatible enable; a voltage below 0.8V keeps the output on and above 2.0V turns it off, with no internal pull-up or pull-down so it must be tied to GND if unused.
5 ADJUST output Adjust pin for setting the output voltage through the external resistor divider R1 and R2, with VREF typically 1.275V.
6 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer HGSEMI
Package TO-263-5
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入电压 VOUT 1.211 1.275 1.339 V 5mA≤lo≤750mA 4
漏失电压 VDrop 0.5 1 V lo=750mA 4
漏失电压 VDrop 110 200 mV lo=100mA 4
ON 阈值 Von 0.7 0.8 V lo≤750mA 4
OFF 阈值 VOff 1.9 2 V lo≤750mA 4
静态电压 ICC 10 20 mA VO+2V≤VIN≤16V,lo=5mA 4
静态电压 ICC 35 60 mA VIN=VO+5V,lo=750mA 4
线性调整率 VRLINE 4 10 mV VO+2V≤VIN≤16V,lo=5mA 4
负载调整率 VRLOAD 7 15 mV 50mA≤lo≤750mA 4
短路电流 Ishort 1.6 1.9 A VinMax=20V 4
最大工作电压 VinMax 26 31 V 4
ON/OFF 端电流 50 300 uA VON/OFF=2.0V,lo≤750mA 4
输出阻抗 VOR 7 mΩ/V 100mADC and 20 mArms,f=120Hz 4
RMS 噪声 Noise 0.003 % 10Hz-100KHz,lo=5mA 4
输入电压 VIN 16 V 3
工作结温范围 TJ -40 125 °C 3
输入电源电压 VIN 20 V 3
引脚温度(焊接 10 秒)TO-263/TO-220 TLEAD 245 °C 焊接10秒 3
工作结温范围 TJ 150 °C 3
存储温度范围 Tstg -65 150 °C 3
ESD(人体模式) ESD 2000 V 人体模式 3
ESD(机器模式) ESD 300 V 机器模式 3
热阻 TO-263-5L θJA 60 °C/W TO-263-5L 3

CAD (KiCad official)

  • Symbol: MIC39372S
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: mic39372s-etched.step / mic39372s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic39372s.step / mic39372s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 ec15d4653972bbf9, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF