main
Ray Publish 0.1.0 d0ced28
{
  "slug": "mic2800-g1jsyml-tr",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Power Management Specialized - PMIC, QFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "mic2800-g1jsyml-tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic2800-g1jsyml-tr.kicad_sym",
    "mic2800-g1jsyml-tr.kicad_mod",
    "mic2800-g1jsyml-tr.glb",
    "mic2800-g1jsyml-tr.step",
    "mic2800-g1jsyml-tr.lbr",
    "docs/hero.png",
    "docs/mic2800-g1jsyml-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic2800-g1jsyml-tr-hero.glb",
    "mic2800-g1jsyml-tr-hero.overlay.json",
    "mic2800-g1jsyml-tr-etched.glb"
  ],
  "component": {
    "mpn": "MIC2800-G1JSYML-TR",
    "manufacturer": "Microchip Tech",
    "package": "QFN-16(3x3)",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "Power Management Specialized - PMIC",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/78d3946c7884839e58495a88a51f318a.pdf",
    "parts": {
      "symbol": "mic2800-g1jsyml-tr.kicad_sym",
      "footprint": "mic2800-g1jsyml-tr.kicad_mod",
      "model_3d": "mic2800-g1jsyml-tr-hero.glb",
      "model_3d_plain": "mic2800-g1jsyml-tr-etched.glb",
      "model_3d_step": "mic2800-g1jsyml-tr-etched.step",
      "model_3d_step_plain": "mic2800-g1jsyml-tr.step",
      "lbr": "mic2800-g1jsyml-tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C621826",
      "digikey": "MIC2800-G1JSYML-TR-ND",
      "mouser": "579-MIC2800G1JSYMLTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T12:06:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MIC2800-G1JSYML-TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "579-MIC2800G1JSYMLTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LOWQ",
        "type": "input",
        "description": "LOWQ mode control input: logic high (>1V) = full power PWM mode, logic low (<0.2V) = LOWQ mode; do not leave floating."
      },
      {
        "number": "2",
        "name": "BIAS",
        "type": "passive",
        "description": "Internal circuit bias supply, powered from VIN through an internal 6Ω resistor; decouple to signal ground with a 0.1 µF capacitor and do not load."
      },
      {
        "number": "3",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground for the biasing and control circuitry."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for the high-current PWM mode."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switch output of the internal power MOSFETs, connects directly to the inductor."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for the DC/DC converter (2.7V to 5.5V); must be tied to pin 7 externally, with a 4.7 µF minimum ceramic capacitor recommended close to it."
      },
      {
        "number": "7",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input for LDO2; must be tied to pin 6 externally."
      },
      {
        "number": "8",
        "name": "LDO2",
        "type": "output",
        "description": "Output of LDO regulator 2, 300 mA capable, with minimum recommended 2.2 µF ceramic output capacitance."
      },
      {
        "number": "9",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the DC/DC error amplifier; for fixed output versions connect directly to VOUT."
      },
      {
        "number": "10",
        "name": "LDO",
        "type": "passive",
        "description": "Output of the LOWQ-mode linear regulator; connect to the DC/DC VOUT, and it also supplies LDO1 in PWM mode."
      },
      {
        "number": "11",
        "name": "LDO1",
        "type": "output",
        "description": "Output of LDO regulator 1, powered from the DC/DC output, with minimum recommended 2.2 µF ceramic output capacitance."
      },
      {
        "number": "12",
        "name": "POR",
        "type": "output",
        "description": "Open-drain active-low power-on reset output indicating undervoltage on the regulated outputs; requires a pull-up resistor."
      },
      {
        "number": "13",
        "name": "CSET",
        "type": "passive",
        "description": "POR delay set pin: external capacitor to GND sets the delay (µs equals capacitance in pF, up to 1 s); left open gives minimum delay and the pin cannot be grounded."
      },
      {
        "number": "14",
        "name": "CBYP",
        "type": "passive",
        "description": "Reference bypass: external 0.1 µF to GND reduces output noise; may be left open."
      },
      {
        "number": "15",
        "name": "EN1",
        "type": "input",
        "description": "Active-high enable for the DC/DC converter and LDO1 (VIH min 1.0V); do not leave floating."
      },
      {
        "number": "16",
        "name": "EN2",
        "type": "input",
        "description": "Active-high enable for LDO2 (VIH min 1.0V); do not leave floating."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pages provided do not include the package drawing or an exposed-pad description, so an; Pin types for BIAS, LDO, CSET and CBYP are judgment calls (passive). SW is typed output."
        ],
        "pages_sent": 7,
        "cost_usd": 0.0723,
        "at": "2026-10-30T12:05:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/78d3946c7884839e58495a88a51f318a.pdf",
        "pages": 30,
        "sha256": "6e374b5182424e57",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic2800-g1jsyml-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic2800-g1jsyml-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a067c7a2e87cb371b8b6711dfbcc73930dc15a0b920fc4eb78becb086b328291",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}