main
Ray
md7030: laser-etched CAD + chip hero (factory 2.0.0 backfill)
02b322b
MD7030
Shanghai Mingda Microelectronics · Supervisor and Reset ICs · SOT-23-3L
MD7030 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | NMOS open-drain detector output (normally open, active low). Pulls to VSS when VDD falls below VDET (3.0V typ.); requires an external pull-up to VDD or a separate rail. Sink capability typically 2.7mA at VOUT=0.2V (guaranteed 2-4mA range). Not valid while VDD is below the minimum operating voltage. |
| 2 | GND | power_in | Ground / VSS reference (0 V). Connect to system ground. |
| 3 | VDD | power_in | Positive supply and monitored input. Operating range 1.5V to 15V (absolute max 18V, -0.3V to 18V). Detection threshold VDET is applied to this pin; typical no-load supply current 1.2µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 3 |
Ordering variants
MD70300XXMD703070XXMD703070XXC
CAD (KiCad official)
- Symbol:
MD7030 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
md7030-etched.step/md7030-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7030.step/md7030.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (None pp, sha256
a73a565d183efa3d, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD7030
**Shanghai Mingda Microelectronics** · Supervisor and Reset ICs · SOT-23-3L
MD7030 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | NMOS open-drain detector output (normally open, active low). Pulls to VSS when VDD falls below VDET (3.0V typ.); requires an external pull-up to VDD or a separate rail. Sink capability typically 2.7mA at VOUT=0.2V (guaranteed 2-4mA range). Not valid while VDD is below the minimum operating voltage. |
| 2 | GND | power_in | Ground / VSS reference (0 V). Connect to system ground. |
| 3 | VDD | power_in | Positive supply and monitored input. Operating range 1.5V to 15V (absolute max 18V, -0.3V to 18V). Detection threshold VDET is applied to this pin; typical no-load supply current 1.2µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
- `MD70300XX`
- `MD703070XX`
- `MD703070XXC`
## CAD (KiCad official)
- Symbol: `MD7030`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `md7030-etched.step` / `md7030-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md7030.step` / `md7030.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md7030-datasheet.pdf) (None pp, sha256 `a73a565d183efa3d`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md7030-datasheet.pdf)