main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs md7030: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers md7030: viewers · Ray
md7030-etched.fit.json md7030: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7030-etched.glb md7030: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7030-etched.step md7030: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md7030.glb Publish 0.1.0 · Ray
md7030.kicad_mod Publish 0.1.0 · Ray
md7030.kicad_sym Publish 0.1.0 · Ray
md7030.lbr Publish 0.1.0 · Ray
md7030.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json md7030: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md md7030: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MD7030

Shanghai Mingda Microelectronics · Supervisor and Reset ICs · SOT-23-3L

MD7030 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output NMOS open-drain detector output (normally open, active low). Pulls to VSS when VDD falls below VDET (3.0V typ.); requires an external pull-up to VDD or a separate rail. Sink capability typically 2.7mA at VOUT=0.2V (guaranteed 2-4mA range). Not valid while VDD is below the minimum operating voltage.
2 GND power_in Ground / VSS reference (0 V). Connect to system ground.
3 VDD power_in Positive supply and monitored input. Operating range 1.5V to 15V (absolute max 18V, -0.3V to 18V). Detection threshold VDET is applied to this pin; typical no-load supply current 1.2µA.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-3L
Category PMIC
Pins 3

Ordering variants

  • MD70300XX
  • MD703070XX
  • MD703070XXC

CAD (KiCad official)

  • Symbol: MD7030
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)
  • 3D model files: md7030-etched.step / md7030-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md7030.step / md7030.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (None pp, sha256 a73a565d183efa3d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF