Loads on click. Unloads only if this page sits in the background.
Contents

README

markdown

MD7030

Shanghai Mingda Microelectronics · Supervisor and Reset ICs · SOT-23-3L

MD7030 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output NMOS open-drain detector output (normally open, active low). Pulls to VSS when VDD falls below VDET (3.0V typ.); requires an external pull-up to VDD or a separate rail. Sink capability typically 2.7mA at VOUT=0.2V (guaranteed 2-4mA range). Not valid while VDD is below the minimum operating voltage.
2 GND power_in Ground / VSS reference (0 V). Connect to system ground.
3 VDD power_in Positive supply and monitored input. Operating range 1.5V to 15V (absolute max 18V, -0.3V to 18V). Detection threshold VDET is applied to this pin; typical no-load supply current 1.2µA.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-3L
Category PMIC
Pins 3

Ordering variants

  • MD70300XX
  • MD703070XX
  • MD703070XXC

CAD (KiCad official)

  • Symbol: MD7030
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (None pp, sha256 a73a565d183efa3d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF