main
Ray mcp3914a1-e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) ebd686e
{
  "schema_version": 1,
  "type": "component",
  "slug": "mcp3914a1-e",
  "title": "MCP3914A1-E",
  "brief": "Microchip Tech Analog Front End (AFE), QFN-40-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "mcp3914a1-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MCP3914A1-E",
    "manufacturer": "Microchip Tech",
    "package": "QFN-40-EP(5x5)",
    "pin_count": 41,
    "category": "Data Acquisition",
    "subcategory": "Analog Front End (AFE)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893839130308608",
    "parts": {
      "symbol": "mcp3914a1-e.kicad_sym",
      "footprint": "mcp3914a1-e.kicad_mod",
      "model_3d": "mcp3914a1-e-etched.glb",
      "model_3d_plain": "mcp3914a1-e.glb",
      "model_3d_step": "mcp3914a1-e-etched.step",
      "model_3d_step_plain": "mcp3914a1-e.step",
      "lbr": "mcp3914a1-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C220225"
    },
    "pins": [
      {
        "number": "1",
        "name": "CH2+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 2, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "2",
        "name": "CH2-",
        "type": "input",
        "description": "Inverting differential input for Channel 2, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "3",
        "name": "CH3-",
        "type": "input",
        "description": "Inverting differential input for Channel 3, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "4",
        "name": "CH3+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 3, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect."
      },
      {
        "number": "7",
        "name": "CH4+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 4, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "8",
        "name": "CH4-",
        "type": "input",
        "description": "Inverting differential input for Channel 4, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "9",
        "name": "CH5-",
        "type": "input",
        "description": "Inverting differential input for Channel 5, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "10",
        "name": "CH5+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 5, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "11",
        "name": "CH6+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 6, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "12",
        "name": "CH6-",
        "type": "input",
        "description": "Inverting differential input for Channel 6, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "13",
        "name": "CH7-",
        "type": "input",
        "description": "Inverting differential input for Channel 7, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "14",
        "name": "CH7+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 7, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "15",
        "name": "REFIN+/OUT",
        "type": "bidirectional",
        "description": "Non-inverting reference input or internal 1.2V reference output (±2% tolerance, 9 ppm/°C tempco), 10 pF input capacitance, selected by VREFEXT bit."
      },
      {
        "number": "16",
        "name": "REFIN-",
        "type": "input",
        "description": "Inverting reference input or ground connection for single-ended reference; must be connected to AGND when using internal reference or single-ended external reference."
      },
      {
        "number": "17",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return path for internal analog circuitry; must be connected for proper device operation, star connection recommended."
      },
      {
        "number": "18",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."
      },
      {
        "number": "19",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect."
      },
      {
        "number": "20",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."
      },
      {
        "number": "21",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground return path for internal digital circuitry; must be connected for proper device operation, star connection recommended."
      },
      {
        "number": "22",
        "name": "DR",
        "type": "output",
        "description": "Data Ready output signal, active-low pulse with width equal to half DMCLK period, indicates new conversion result ready for reading."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect."
      },
      {
        "number": "24",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground return path for internal digital circuitry; must be connected for proper device operation, star connection recommended."
      },
      {
        "number": "25",
        "name": "OSC1/CLKI",
        "type": "input",
        "description": "Oscillator crystal connection or external clock input (1 to 20 MHz), selected by CLKEXT bit; must provide master clock for ADC operation."
      },
      {
        "number": "26",
        "name": "OSC2",
        "type": "passive",
        "description": "Oscillator crystal connection pin for resonant crystal with proper load capacitance; must be connected to DGND when using external clock (CLKEXT=1) with internal pull-down."
      },
      {
        "number": "27",
        "name": "CS",
        "type": "input",
        "description": "Serial Interface Chip Select input, active low; falling edge initiates communication, rising edge terminates, Schmitt-triggered."
      },
      {
        "number": "28",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input, maximum 20 MHz, data clocked in on rising edge and out on falling edge, Schmitt-triggered, compatible with SPI modes 0,0 and 1,1."
      },
      {
        "number": "29",
        "name": "SDO",
        "type": "tri_state",
        "description": "Serial data output, high-impedance during command byte and write operations, maximum output frequency 20 MHz."
      },
      {
        "number": "30",
        "name": "SDI",
        "type": "input",
        "description": "Serial data input for 8-bit commands, data clocked in on rising edge of SCK, 100 kΩ pull-up to DVDD recommended when DR_HIZ bit is low, Schmitt-triggered."
      },
      {
        "number": "31",
        "name": "RESET",
        "type": "input",
        "description": "Master Reset input, active low, Schmitt-triggered; minimum 100 ns pulse width required, resets all registers to default power-on state."
      },
      {
        "number": "32",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground return path for internal digital circuitry; must be connected for proper device operation, star connection recommended."
      },
      {
        "number": "33",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."
      },
      {
        "number": "34",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect."
      },
      {
        "number": "35",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."
      },
      {
        "number": "36",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground return path for internal analog circuitry; must be connected for proper device operation, star connection recommended."
      },
      {
        "number": "37",
        "name": "CH0+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 0, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "38",
        "name": "CH0-",
        "type": "input",
        "description": "Inverting differential input for Channel 0, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "39",
        "name": "CH1-",
        "type": "input",
        "description": "Inverting differential input for Channel 1, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "40",
        "name": "CH1+",
        "type": "input",
        "description": "Non-inverting differential input for Channel 1, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."
      },
      {
        "number": "41",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad for heat dissipation, must be connected to AGND for optimal thermal performance or left floating."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 80,
        "cost_usd": 0.7933,
        "at": "2026-09-18T05:56:44"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893839130308608",
        "pages": 80,
        "sha256": "ad1e415765f2a026",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 41,
        "described": 41,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp3914a1-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp3914a1-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2ef066deaf5ca541ee6de9d67b99606cf36071a16a93a963b395bc9a3f89ef8c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "QFN-40-EP(5x5)",
      "Category": "Data Acquisition",
      "Pins": "41"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mcp3914a1-e"
  ],
  "discovery_pitch": "MCP3914A1-E (Microchip Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp3914a1-e.kicad_sym",
    "mcp3914a1-e.kicad_mod",
    "mcp3914a1-e.glb",
    "mcp3914a1-e.step",
    "mcp3914a1-e.lbr",
    "docs/hero.png",
    "docs/mcp3914a1-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T19:07:05.313Z"
}