← Commit history

mcp3914a1-e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·ebd686ee0d · ·parent 94f04ce
2 files changed +106−26
package.json+64−24
@@ -53,25 +53,25 @@         "number": "1",         "name": "CH2+",         "type": "input",-        "description": "Non-inverting differential input for Channel 2, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 2, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "2",         "name": "CH2-",         "type": "input",-        "description": "Inverting differential input for Channel 2, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 2, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "3",         "name": "CH3-",         "type": "input",-        "description": "Inverting differential input for Channel 3, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 3, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "4",         "name": "CH3+",         "type": "input",-        "description": "Non-inverting differential input for Channel 3, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 3, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "5",@@ -89,55 +89,55 @@         "number": "7",         "name": "CH4+",         "type": "input",-        "description": "Non-inverting differential input for Channel 4, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 4, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "8",         "name": "CH4-",         "type": "input",-        "description": "Inverting differential input for Channel 4, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 4, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "9",         "name": "CH5-",         "type": "input",-        "description": "Inverting differential input for Channel 5, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 5, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "10",         "name": "CH5+",         "type": "input",-        "description": "Non-inverting differential input for Channel 5, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 5, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "11",         "name": "CH6+",         "type": "input",-        "description": "Non-inverting differential input for Channel 6, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 6, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "12",         "name": "CH6-",         "type": "input",-        "description": "Inverting differential input for Channel 6, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 6, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "13",         "name": "CH7-",         "type": "input",-        "description": "Inverting differential input for Channel 7, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 7, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "14",         "name": "CH7+",         "type": "input",-        "description": "Non-inverting differential input for Channel 7, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 7, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "15",         "name": "REFIN+/OUT",         "type": "bidirectional",-        "description": "Non-inverting reference input or internal 1.2V reference output (\u00b12% tolerance, 9 ppm/\u00b0C tempco), 10 pF input capacitance, selected by VREFEXT bit."+        "description": "Non-inverting reference input or internal 1.2V reference output (±2% tolerance, 9 ppm/°C tempco), 10 pF input capacitance, selected by VREFEXT bit."       },       {         "number": "16",@@ -155,7 +155,7 @@         "number": "18",         "name": "AVDD",         "type": "power_in",-        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 \u00b5F and 0.1 \u00b5F decoupling capacitors required."+        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."       },       {         "number": "19",@@ -167,7 +167,7 @@         "number": "20",         "name": "DVDD",         "type": "power_in",-        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 \u00b5F and 0.1 \u00b5F decoupling capacitors required."+        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."       },       {         "number": "21",@@ -227,7 +227,7 @@         "number": "30",         "name": "SDI",         "type": "input",-        "description": "Serial data input for 8-bit commands, data clocked in on rising edge of SCK, 100 k\u03a9 pull-up to DVDD recommended when DR_HIZ bit is low, Schmitt-triggered."+        "description": "Serial data input for 8-bit commands, data clocked in on rising edge of SCK, 100 kΩ pull-up to DVDD recommended when DR_HIZ bit is low, Schmitt-triggered."       },       {         "number": "31",@@ -245,7 +245,7 @@         "number": "33",         "name": "DVDD",         "type": "power_in",-        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 \u00b5F and 0.1 \u00b5F decoupling capacitors required."+        "description": "Digital power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."       },       {         "number": "34",@@ -257,7 +257,7 @@         "number": "35",         "name": "AVDD",         "type": "power_in",-        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 \u00b5F and 0.1 \u00b5F decoupling capacitors required."+        "description": "Analog power supply pin, 2.7V to 3.6V operating range with 10 µF and 0.1 µF decoupling capacitors required."       },       {         "number": "36",@@ -269,25 +269,25 @@         "number": "37",         "name": "CH0+",         "type": "input",-        "description": "Non-inverting differential input for Channel 0, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 0, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "38",         "name": "CH0-",         "type": "input",-        "description": "Inverting differential input for Channel 0, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 0, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "39",         "name": "CH1-",         "type": "input",-        "description": "Inverting differential input for Channel 1, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Inverting differential input for Channel 1, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "40",         "name": "CH1+",         "type": "input",-        "description": "Non-inverting differential input for Channel 1, \u00b1600 mV/GAIN differential range and \u00b11 V absolute range to AGND, 232 k\u03a9 input impedance at gain 1."+        "description": "Non-inverting differential input for Channel 1, ±600 mV/GAIN differential range and ±1 V absolute range to AGND, 232 kΩ input impedance at gain 1."       },       {         "number": "41",@@ -328,6 +328,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mcp3914a1-e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp3914a1-e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2ef066deaf5ca541ee6de9d67b99606cf36071a16a93a963b395bc9a3f89ef8c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -313,7 +313,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mcp3914a1-e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp3914a1-e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2ef066deaf5ca541ee6de9d67b99606cf36071a16a93a963b395bc9a3f89ef8c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -361,4 +401,4 @@     "public": true   },   "updated_at": "2026-09-28T19:07:05.313Z"-}\ No newline at end of file+}