Generated by kicad-footprint-generator · KiCad file format 20260206
MCP3564-E
Microchip Tech · Analog To Digital Converters (ADCs) · TSSOP-20
MCP3564-E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog supply pin that must stay within the Electrical Characteristics range (AVDD 2.7 V to 3.6 V), with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass. |
| 2 | AGND | power_in | Analog ground that must be connected to the same ground as DGND, preferably in a star connection, and is not internally connected to DGND. |
| 3 | REFIN- | input | Inverting differential reference input (VREF-) that must be connected directly to AGND for single-ended reference applications. |
| 4 | REFIN+ | input | Noninverting differential reference input (VREF+) where the differential reference must respect 0.6 V ≤ VREF ≤ AVDD at all times. |
| 5 | CH0 | input | Analog input 0, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 6 | CH1 | input | Analog input 1, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 7 | CH2 | input | Analog input 2, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 8 | CH3 | input | Analog input 3, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 9 | CH4 | input | Analog input 4, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 10 | CH5 | input | Analog input 5, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 11 | CH6 | input | Analog input 6, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 12 | CH7 | input | Analog input 7, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V. |
| 13 | CS | input | SPI chip select, active low: a falling edge starts and a rising edge ends each communication, and no communication occurs while high; the input is Schmitt-triggered. |
| 14 | SCK | input | SPI serial clock input with a maximum rate of 20 MHz, Schmitt-triggered, where SDI is latched on the rising edge and SDO is clocked out on the falling edge. |
| 15 | SDI | input | SPI data input, Schmitt-triggered, used to receive the command byte after CS falls and data clocked in on the SCK rising edge. |
| 16 | SDO | tri_state | SPI data output clocked out on the SCK falling edge, which is high-impedance when CS is high and during write or Fast command periods after the command byte. |
| 17 | IRQ/MDAT | output | Digital output configurable as interrupt (IRQ) or modulator data (MDAT) output via IRQ_MODE[1]; when in High-Z an external pull-up to DVDD is required, typically 100-200 kΩ. |
| 18 | MCLK | bidirectional | Master clock input for the ADC or analog master clock output AMCLK, selected by CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz. |
| 19 | DGND | power_in | Digital ground for the internal digital circuitry that must be connected to the same ground as AGND and is not internally connected to AGND. |
| 20 | DVDD | power_in | Digital supply pin that must be maintained within the Electrical Characteristics range, with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Operating Voltage | AVDD | 2.7 | 3.6 | V | 6 | ||
| Digital Operating Voltage | DVDD | 1.8 | V | DVDD ≤ 3.6V | 6 | ||
| Analog Operating Current | AIDD | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 | |
| Analog Operating Current | AIDD | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 | |
| Analog Operating Current | AIDD | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 | |
| Analog Operating Current | AIDD | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | |
| Digital Operating Current | DIDD | 0.25 | 0.37 | mA | Note 8 | 6 | |
| Analog Partial Shutdown Current | AIDDS_PS | 22 | µA | 6 | |||
| Digital Partial Shutdown Current | DIDDS_PS | 158 | µA | 6 | |||
| Analog Full Shutdown Current | AIDDS_FS | 0.83 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Analog Full Shutdown Current | AIDDS_FS | 1.1 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 2.4 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 5 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Input Leakage Current During ADC Shutdown | ILI_A | -10 | 10 | nA | 7 | ||
| Reference Voltage Range (VREF+, VREF-) | VREF | 0.6 | V | 7 | |||
| Gain Error | GE | -3 | 3 | % | Note 6 | 7 | |
| Gain Error Temperature Coefficient (GAIN 1x, 2x, 4x) | GE_DRIFT | 0.5 | 2 | ppm/°C | GAIN: 1x, 2x, 4x (Note 2) | 7 | |
| Gain Error Temperature Coefficient (GAIN 8x) | GE_DRIFT | 1 | 4 | ppm/°C | GAIN: 8x (Note 2) | 7 | |
| Gain Error Temperature Coefficient (GAIN 0.33x, 16x) | GE_DRIFT | 2 | 8 | ppm/°C | GAIN: 0.33x, 16x (Note 2) | 7 | |
| Integral Nonlinearity | INL | -10 | 10 | ppm FSR | GAIN = 0.33x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -7 | 7 | ppm FSR | GAIN = 1x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -20 | 20 | ppm FSR | GAIN = 8x (Note 2) | 8 | |
| Integral Nonlinearity | INL | -32 | 32 | ppm FSR | GAIN = 16x (Note 2) | 8 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 105.8 | 106.7 | dB | AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Signal-to-Noise Ratio | SNR | 106.7 | 107.2 | dBc | AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Total Harmonic Distortion | THD | -116 | -111 | dB | AVDD = DVDD = VREF = 3.3V and TA = +25°C, includes the first 10 harmonics (Note 2) | 8 | |
| Spurious-Free Dynamic Range | SFDR | 110 | 120 | dBc | AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Resolution | 24 | Bits | OSR ≥ 256 (Note 1) | 7 | |||
| External Master Clock Input Frequency Range (DVDD ≥ 2.7V) | fMCLK_EXT | 1 | 20 | MHz | DVDD ≥ 2.7V | 9 | |
| External Master Clock Input Frequency Range (DVDD < 2.7V) | fMCLK_EXT | 1 | 10 | MHz | DVDD < 2.7V | 9 | |
| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | 55 | % | 9 | ||
| Internal Master Clock Frequency | fMCLK_INT | 3.3 | 6.6 | MHz | CLK_SEL[1] = 1 | 9 | |
| Data Ready Pulse High Time | TDRH | 16 | DMCLK periods | See Figure 5-15 | 9 | ||
| Data Transfer Time to DR (Data Ready) | tDODR | 50 | ns | 9 | |||
| Modulator Output Valid from AMCLK High (2.7V ≤ DVDD ≤ 3.6V) | tDOMDAT | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 9 | ||
| Modulator Output Valid from AMCLK High (1.8V ≤ DVDD ≤ 2.7V) | tDOMDAT | 200 | ns | 1.8V ≤ DVDD ≤ 2.7V | 9 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Serial Clock Frequency (DVDD 2.7V-3.6V) | fSCK | 20 | MHz | 10 | |||
| CS Setup Time (DVDD 2.7V-3.6V) | tCSS | 25 | ns | 10 | |||
| CS Hold Time (DVDD 2.7V-3.6V) | tCSH | 50 | ns | 10 | |||
| CS Disable Time (DVDD 2.7V-3.6V) | tCSD | 50 | ns | 10 | |||
| Data Setup Time (DVDD 2.7V-3.6V) | tSU | 5 | ns | 10 | |||
| Data Hold Time (DVDD 2.7V-3.6V) | tHD | 10 | ns | 10 | |||
| Serial Clock High Time (DVDD 2.7V-3.6V) | tHI | 20 | ns | 10 | |||
| Serial Clock Low Time (DVDD 2.7V-3.6V) | tLO | 20 | ns | 10 | |||
| Serial Clock Delay Time (DVDD 2.7V-3.6V) | tCLD | 50 | ns | 10 | |||
| Output Valid from SCK Low (DVDD 2.7V-3.6V) | tDO | 25 | ns | 10 | |||
| Output Disable Time (DVDD 2.7V-3.6V) | tDIS | 25 | ns | Measured with a 1.5 mA pull-up current source on SDO pin | 10 | ||
| POR IRQ Disable Time (DVDD 2.7V-3.6V) | tCSIRQ | 52 | ns | Measured with a 1.5 mA pull-up current source on IRQ pin | 10 | ||
| Output Valid from CS Low (DVDD 2.7V-3.6V) | tCSSDO | 25 | ns | SDO toggles to logic low at each communication start (CS falling edge) | 10 | ||
| Serial Clock Frequency (DVDD 1.8V-2.7V) | fSCK | 10 | MHz | 11 | |||
| Output Valid from SCK Low (DVDD 1.8V-2.7V) | tDO | 50 | ns | 11 | |||
| Output Disable Time (DVDD 1.8V-2.7V) | tDIS | 50 | ns | Measured with a 1.5 mA pull-up current source on SDO pin | 11 | ||
| Input Leakage Current (Digital I/O) | ILI_D | 1 | µA | Pins configured as inputs or high-impedance outputs | 11 | ||
| Thermal Resistance, 20-Lead TSSOP | JA | 44 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
MCP3564-E - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mcp3564-e-etched.step/mcp3564-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3564-e.step/mcp3564-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (108 pp, sha256
11fef1e883a587d7, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).