main
Ray Publish 0.1.0 f4d4ec3
{
  "slug": "mcp3564-e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Analog To Digital Converters (ADCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "mcp3564-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp3564-e.kicad_sym",
    "mcp3564-e.kicad_mod",
    "mcp3564-e.glb",
    "mcp3564-e.step",
    "mcp3564-e.lbr",
    "docs/hero.png",
    "docs/mcp3564-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp3564-e-hero.glb",
    "mcp3564-e-hero.overlay.json",
    "mcp3564-e-etched.glb"
  ],
  "component": {
    "mpn": "MCP3564-E",
    "manufacturer": "Microchip Tech",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1f974180cfb6feedd5ffebd87b52eaa7.pdf",
    "parts": {
      "symbol": "mcp3564-e.kicad_sym",
      "footprint": "mcp3564-e.kicad_mod",
      "model_3d": "mcp3564-e-hero.glb",
      "model_3d_plain": "mcp3564-e-etched.glb",
      "model_3d_step": "mcp3564-e-etched.step",
      "model_3d_step_plain": "mcp3564-e.step",
      "lbr": "mcp3564-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C1012816"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:41:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply pin that must stay within the Electrical Characteristics range (AVDD 2.7 V to 3.6 V), with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass."
      },
      {
        "number": "2",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground that must be connected to the same ground as DGND, preferably in a star connection, and is not internally connected to DGND."
      },
      {
        "number": "3",
        "name": "REFIN-",
        "type": "input",
        "description": "Inverting differential reference input (VREF-) that must be connected directly to AGND for single-ended reference applications."
      },
      {
        "number": "4",
        "name": "REFIN+",
        "type": "input",
        "description": "Noninverting differential reference input (VREF+) where the differential reference must respect 0.6 V ≤ VREF ≤ AVDD at all times."
      },
      {
        "number": "5",
        "name": "CH0",
        "type": "input",
        "description": "Analog input 0, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "6",
        "name": "CH1",
        "type": "input",
        "description": "Analog input 1, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "7",
        "name": "CH2",
        "type": "input",
        "description": "Analog input 2, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "8",
        "name": "CH3",
        "type": "input",
        "description": "Analog input 3, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "9",
        "name": "CH4",
        "type": "input",
        "description": "Analog input 4, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "10",
        "name": "CH5",
        "type": "input",
        "description": "Analog input 5, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "11",
        "name": "CH6",
        "type": "input",
        "description": "Analog input 6, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "12",
        "name": "CH7",
        "type": "input",
        "description": "Analog input 7, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V."
      },
      {
        "number": "13",
        "name": "CS",
        "type": "input",
        "description": "SPI chip select, active low: a falling edge starts and a rising edge ends each communication, and no communication occurs while high; the input is Schmitt-triggered."
      },
      {
        "number": "14",
        "name": "SCK",
        "type": "input",
        "description": "SPI serial clock input with a maximum rate of 20 MHz, Schmitt-triggered, where SDI is latched on the rising edge and SDO is clocked out on the falling edge."
      },
      {
        "number": "15",
        "name": "SDI",
        "type": "input",
        "description": "SPI data input, Schmitt-triggered, used to receive the command byte after CS falls and data clocked in on the SCK rising edge."
      },
      {
        "number": "16",
        "name": "SDO",
        "type": "tri_state",
        "description": "SPI data output clocked out on the SCK falling edge, which is high-impedance when CS is high and during write or Fast command periods after the command byte."
      },
      {
        "number": "17",
        "name": "IRQ/MDAT",
        "type": "output",
        "description": "Digital output configurable as interrupt (IRQ) or modulator data (MDAT) output via IRQ_MODE[1]; when in High-Z an external pull-up to DVDD is required, typically 100-200 kΩ."
      },
      {
        "number": "18",
        "name": "MCLK",
        "type": "bidirectional",
        "description": "Master clock input for the ADC or analog master clock output AMCLK, selected by CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz."
      },
      {
        "number": "19",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground for the internal digital circuitry that must be connected to the same ground as AGND and is not internally connected to AGND."
      },
      {
        "number": "20",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital supply pin that must be maintained within the Electrical Characteristics range, with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin Table 3-1 (page 23) is a merged, column-shifted table covering MCP3561/MCP3562/MCP3564 in both U; The exposed thermal pad (EP) is listed only for the UQFN package and is therefore excluded from this; The marking table (page 95) lists the ordering code as MCP3564T-E/NC for the device family without t"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0977,
        "at": "2026-10-28T21:40:52"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/1f974180cfb6feedd5ffebd87b52eaa7.pdf",
        "pages": 108,
        "sha256": "11fef1e883a587d7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp3564-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp3564-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4856bdd590d1b32c4d320677fb05852d204a55f31db645525613711b6295da61",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}