main
History Download
Ray Publish 0.1.0 f4d4ec3

MCP3564-E

Microchip Tech · Analog To Digital Converters (ADCs) · TSSOP-20

MCP3564-E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDD power_in Analog supply pin that must stay within the Electrical Characteristics range (AVDD 2.7 V to 3.6 V), with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass.
2 AGND power_in Analog ground that must be connected to the same ground as DGND, preferably in a star connection, and is not internally connected to DGND.
3 REFIN- input Inverting differential reference input (VREF-) that must be connected directly to AGND for single-ended reference applications.
4 REFIN+ input Noninverting differential reference input (VREF+) where the differential reference must respect 0.6 V ≤ VREF ≤ AVDD at all times.
5 CH0 input Analog input 0, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
6 CH1 input Analog input 1, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
7 CH2 input Analog input 2, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
8 CH3 input Analog input 3, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
9 CH4 input Analog input 4, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
10 CH5 input Analog input 5, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
11 CH6 input Analog input 6, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
12 CH7 input Analog input 7, multiplexed to the VIN+ or VIN- ADC input, with the absolute pin voltage limited to AGND - 0.1 V to VDD + 0.1 V.
13 CS input SPI chip select, active low: a falling edge starts and a rising edge ends each communication, and no communication occurs while high; the input is Schmitt-triggered.
14 SCK input SPI serial clock input with a maximum rate of 20 MHz, Schmitt-triggered, where SDI is latched on the rising edge and SDO is clocked out on the falling edge.
15 SDI input SPI data input, Schmitt-triggered, used to receive the command byte after CS falls and data clocked in on the SCK rising edge.
16 SDO tri_state SPI data output clocked out on the SCK falling edge, which is high-impedance when CS is high and during write or Fast command periods after the command byte.
17 IRQ/MDAT output Digital output configurable as interrupt (IRQ) or modulator data (MDAT) output via IRQ_MODE[1]; when in High-Z an external pull-up to DVDD is required, typically 100-200 kΩ.
18 MCLK bidirectional Master clock input for the ADC or analog master clock output AMCLK, selected by CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz.
19 DGND power_in Digital ground for the internal digital circuitry that must be connected to the same ground as AGND and is not internally connected to AGND.
20 DVDD power_in Digital supply pin that must be maintained within the Electrical Characteristics range, with a 10 µF ceramic in parallel with a 0.1 µF ceramic recommended for bypass.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-20
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog Operating Voltage AVDD 2.7 3.6 V 6
Digital Operating Voltage DVDD 1.8 V DVDD ≤ 3.6V 6
Analog Operating Current AIDD 0.56 0.81 mA BOOST[1:0] = 00, 0.5x 6
Analog Operating Current AIDD 0.69 0.96 mA BOOST[1:0] = 01, 0.66x 6
Analog Operating Current AIDD 0.93 1.3 mA BOOST[1:0] = 10, 1x 6
Analog Operating Current AIDD 1.65 2.2 mA BOOST[1:0] = 11, 2x 6
Digital Operating Current DIDD 0.25 0.37 mA Note 8 6
Analog Partial Shutdown Current AIDDS_PS 22 µA 6
Digital Partial Shutdown Current DIDDS_PS 158 µA 6
Analog Full Shutdown Current AIDDS_FS 0.83 µA CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) 6
Analog Full Shutdown Current AIDDS_FS 1.1 µA CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode 6
Digital Full Shutdown Current DIDDS_FS 2.4 µA CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) 6
Digital Full Shutdown Current DIDDS_FS 5 µA CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode 6
Input Leakage Current During ADC Shutdown ILI_A -10 10 nA 7
Reference Voltage Range (VREF+, VREF-) VREF 0.6 V 7
Gain Error GE -3 3 % Note 6 7
Gain Error Temperature Coefficient (GAIN 1x, 2x, 4x) GE_DRIFT 0.5 2 ppm/°C GAIN: 1x, 2x, 4x (Note 2) 7
Gain Error Temperature Coefficient (GAIN 8x) GE_DRIFT 1 4 ppm/°C GAIN: 8x (Note 2) 7
Gain Error Temperature Coefficient (GAIN 0.33x, 16x) GE_DRIFT 2 8 ppm/°C GAIN: 0.33x, 16x (Note 2) 7
Integral Nonlinearity INL -10 10 ppm FSR GAIN = 0.33x (Note 2) 8
Integral Nonlinearity INL -7 7 ppm FSR GAIN = 1x (Note 2) 8
Integral Nonlinearity INL -20 20 ppm FSR GAIN = 8x (Note 2) 8
Integral Nonlinearity INL -32 32 ppm FSR GAIN = 16x (Note 2) 8
Signal-to-Noise and Distortion Ratio SINAD 105.8 106.7 dB AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) 8
Signal-to-Noise Ratio SNR 106.7 107.2 dBc AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) 8
Total Harmonic Distortion THD -116 -111 dB AVDD = DVDD = VREF = 3.3V and TA = +25°C, includes the first 10 harmonics (Note 2) 8
Spurious-Free Dynamic Range SFDR 110 120 dBc AVDD = DVDD = VREF = 3.3V and TA = +25°C (Note 2) 8
Resolution 24 Bits OSR ≥ 256 (Note 1) 7
External Master Clock Input Frequency Range (DVDD ≥ 2.7V) fMCLK_EXT 1 20 MHz DVDD ≥ 2.7V 9
External Master Clock Input Frequency Range (DVDD < 2.7V) fMCLK_EXT 1 10 MHz DVDD < 2.7V 9
Master Clock Input Duty Cycle fMCLK_DUTY 45 55 % 9
Internal Master Clock Frequency fMCLK_INT 3.3 6.6 MHz CLK_SEL[1] = 1 9
Data Ready Pulse High Time TDRH 16 DMCLK periods See Figure 5-15 9
Data Transfer Time to DR (Data Ready) tDODR 50 ns 9
Modulator Output Valid from AMCLK High (2.7V ≤ DVDD ≤ 3.6V) tDOMDAT 100 ns 2.7V ≤ DVDD ≤ 3.6V 9
Modulator Output Valid from AMCLK High (1.8V ≤ DVDD ≤ 2.7V) tDOMDAT 200 ns 1.8V ≤ DVDD ≤ 2.7V 9
Specified Temperature Range TA -40 125 °C 10
Operating Temperature Range TA -40 125 °C 10
Storage Temperature Range TA -65 150 °C 10
Serial Clock Frequency (DVDD 2.7V-3.6V) fSCK 20 MHz 10
CS Setup Time (DVDD 2.7V-3.6V) tCSS 25 ns 10
CS Hold Time (DVDD 2.7V-3.6V) tCSH 50 ns 10
CS Disable Time (DVDD 2.7V-3.6V) tCSD 50 ns 10
Data Setup Time (DVDD 2.7V-3.6V) tSU 5 ns 10
Data Hold Time (DVDD 2.7V-3.6V) tHD 10 ns 10
Serial Clock High Time (DVDD 2.7V-3.6V) tHI 20 ns 10
Serial Clock Low Time (DVDD 2.7V-3.6V) tLO 20 ns 10
Serial Clock Delay Time (DVDD 2.7V-3.6V) tCLD 50 ns 10
Output Valid from SCK Low (DVDD 2.7V-3.6V) tDO 25 ns 10
Output Disable Time (DVDD 2.7V-3.6V) tDIS 25 ns Measured with a 1.5 mA pull-up current source on SDO pin 10
POR IRQ Disable Time (DVDD 2.7V-3.6V) tCSIRQ 52 ns Measured with a 1.5 mA pull-up current source on IRQ pin 10
Output Valid from CS Low (DVDD 2.7V-3.6V) tCSSDO 25 ns SDO toggles to logic low at each communication start (CS falling edge) 10
Serial Clock Frequency (DVDD 1.8V-2.7V) fSCK 10 MHz 11
Output Valid from SCK Low (DVDD 1.8V-2.7V) tDO 50 ns 11
Output Disable Time (DVDD 1.8V-2.7V) tDIS 50 ns Measured with a 1.5 mA pull-up current source on SDO pin 11
Input Leakage Current (Digital I/O) ILI_D 1 µA Pins configured as inputs or high-impedance outputs 11
Thermal Resistance, 20-Lead TSSOP JA 44 °C/W 10

CAD (KiCad official)

  • Symbol: MCP3564-E
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: mcp3564-e-etched.step / mcp3564-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3564-e.step / mcp3564-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (108 pp, sha256 11fef1e883a587d7, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF