Generated by kicad-footprint-generator · KiCad file format 20260206
MCP3561RT-E/ST
Microchip Tech · Analog To Digital Converters (ADCs) · TSSOP-20
MCP3561RT-E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVDD | power_in | Analog supply voltage pin, specified for 2.7V to 3.6V, monitored by the AVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass. |
| 2 | AGND | power_in | Analog ground connection to the internal analog circuitry, to be tied to the same ground as DGND (preferably star connection) and not internally connected to DGND. |
| 3 | REFIN- | input | Inverting differential reference input (VREF-), which must be connected to AGND for single-ended reference applications, with VREF kept within 0.6V to AVDD. |
| 4 | REFIN+/OUT | bidirectional | Non-inverting reference input (VREF+) when VREF_SEL = 0, or the internal 2.4V voltage reference output when VREF_SEL = 1, and should be bypassed to AGND with 0.1 µF and 10 µF ceramic capacitors. |
| 5 | CH0 | input | Analog input 0, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V. |
| 6 | CH1 | input | Analog input 1, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V. |
| 7 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH2 on the MCP3562/MCP3564 variants). |
| 8 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH3 on the MCP3562/MCP3564 variants). |
| 9 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH4 on the MCP3564 variant). |
| 10 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH5 on the MCP3564 variant). |
| 11 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH6 on the MCP3564 variant). |
| 12 | NC | unconnected | Not connected on the MCP3561 TSSOP package (CH7 on the MCP3564 variant). |
| 13 | CS | input | SPI chip select, Schmitt-triggered; a falling edge starts a communication, a rising edge ends it, and no communication can occur while it is logic high. |
| 14 | SCK | input | SPI serial clock input, Schmitt-triggered, with a maximum clock of 20 MHz; data are latched on the rising edge and clocked out on the falling edge in SPI modes 0,0 and 1,1. |
| 15 | SDI | input | SPI data input, Schmitt-triggered; when CS is logic low, data are clocked in on the rising edge of SCK. |
| 16 | SDO | tri_state | SPI data output, clocked out on the falling edge of SCK, which stays high-impedance when CS is logic high and during write or Fast command periods after the command byte. |
| 17 | IRQ/MDAT | output | Interrupt output by default, or modulator data output when IRQ_MODE[1] = 1; when in High-Z mode an external pull-up of about 100-200 kΩ to DVDD is required. |
| 18 | MCLK | bidirectional | Master clock input for the ADC or analog master clock (AMCLK) output, selected by CLK_SEL[1:0] in CONFIG0, with a typical clock frequency of 4.9152 MHz. |
| 19 | DGND | power_in | Digital ground connection to the internal digital circuitry, which must be connected externally to the same ground as AGND as it is not internally connected to AGND. |
| 20 | DVDD | power_in | Digital supply voltage, specified for 1.8V to 3.6V and monitored by the DVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | DVDD, AVDD | -0.3 | 4 | V | 5 | ||
| Digital Inputs and Outputs w.r.t. DGND (max printed as DVDD + 0.3V) | -0.3 | V | 5 | ||||
| Analog Inputs w.r.t. AGND (max printed as AVDD + 0.3V) | -0.3 | V | 5 | ||||
| Current at Input Pins | -5 | 5 | mA | 5 | |||
| Current at Output and Supply Pins | -20 | 20 | mA | 5 | |||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Ambient Temperature with Power Applied | -65 | 125 | °C | 5 | |||
| Soldering Temperature of Leads | 300 | °C | 10 seconds | 5 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 5 | |||
| ESD on All Pins (HBM) | 6 | kV | 5 | ||||
| Specified Temperature Range | TA | -40 | 125 | °C | 11 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 11 | ||
| Analog Operating Voltage | AVDD | 2.7 | 3.6 | V | 6 | ||
| Digital Operating Voltage (max printed as AVDD + 0.1 V) | DVDD | 1.8 | V | DVDD ≤ 3.6V | 6 | ||
| Analog Operating Current | AIDD | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 | |
| Analog Operating Current | AIDD | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 | |
| Analog Operating Current | AIDD | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 | |
| Analog Operating Current | AIDD | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | |
| Analog Operating Current | AIDD | 0.96 | mA | BOOST[1:0] = 00, 0.5x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current | AIDD | 1.2 | mA | BOOST[1:0] = 01, 0.66x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current | AIDD | 1.6 | mA | BOOST[1:0] = 10, 1x, VREF = 2.4V internal | 6 | ||
| Analog Operating Current | AIDD | 2.5 | mA | BOOST[1:0] = 11, 2x, VREF = 2.4V internal | 6 | ||
| Digital Operating Current | DIDD | 0.25 | 0.37 | mA | (Note 8) | 6 | |
| Analog Partial Shutdown Current | AIDDS_PS | 22 | µA | CONFIG0 = 0x00 | 6 | ||
| Digital Partial Shutdown Current | DIDDS_PS | 17 | µA | CONFIG0 = 0x00 | 6 | ||
| Analog Full Shutdown Current | AIDDS_FS | 0.4 | µA | CONFIG0 = 0x00 with Full-Shutdown Fast-CMD | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 2 | µA | CONFIG0 = 0x00 with Full-Shutdown Fast-CMD | 6 | ||
| Analog Input Leakage Current During ADC Shutdown | ILI_A | -10 | 10 | nA | 7 | ||
| Internal VREF Absolute Voltage (min/max printed as -2% / +2%; typ printed in V) | IVREF | -2 | 2.4 | 2 | % | VREF_SEL = 1, TA = +25°C only | 7 |
| Internal VREF Temperature Coefficient | TCREFE | 15 | 40 | ppm/°C | TA = -40°C to +125°C, Extended Temperature Range | 7 | |
| Internal VREF Temperature Coefficient | TCREFI | 9 | 40 | ppm/°C | TA = -40°C to +85°C, Industrial Temperature Range | 7 | |
| Voltage Reference Buffer Short Circuit Current | IREF_SC | 8 | mA | REFIN+/OUT shorted to AGND, VREF_SEL = 1, (Note 9) | 7 | ||
| Reference Voltage Range (VREF+-VREF-), max printed as AVDD | VREF | 0.6 | V | VREF_SEL = 0 | 8 | ||
| Resolution | 24 | Bits | OSR ≥ 256 (Note 1) | 8 | |||
| Gain Error | GE | -3 | 3 | % | (Note 6) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 0.5 | 2 | ppm/°C | GAIN: 1x, 2x, 4x (Note 2) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 1 | 4 | ppm/°C | GAIN: 8x (Note 2) | 8 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 2 | 8 | ppm/°C | GAIN: 0.33x, 16x (Note 2) | 8 | |
| Integral Nonlinearity (Note 7) | INL | -10 | 10 | ppm FSR | GAIN = 0.33x (Note 2) | 8 | |
| Integral Nonlinearity (Note 7) | INL | -7 | 7 | ppm FSR | GAIN = 1x (Note 2) | 8 | |
| Integral Nonlinearity (Note 7) | INL | -20 | 20 | ppm FSR | GAIN = 8x (Note 2) | 8 | |
| Integral Nonlinearity (Note 7) | INL | -32 | 32 | ppm FSR | GAIN = 16x (Note 2) | 8 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 105.8 | 106.7 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 98.1 | 99.4 | dB | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise Ratio | SNR | 106.7 | 107.2 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Signal-to-Noise Ratio | SNR | 98.5 | 99.8 | dBc | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Total Harmonic Distortion | THD | -116 | -111 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C, includes the first 10 harmonics (Note 2) | 9 | |
| Total Harmonic Distortion | THD | -110 | -105 | dB | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C, includes the first 10 harmonics (Note 2) | 9 | |
| Spurious-Free Dynamic Range | SFDR | 110 | 120 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 9 | |
| Spurious-Free Dynamic Range | SFDR | 108 | 113 | dBc | AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) | 9 | |
| Data Transfer Time to DR (Data Ready) | tDODR | 50 | ns | 10 | |||
| Modulator Output Valid from AMCLK High | tDOMDAT | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 10 | ||
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 20 | MHz | DVDD ≥ 2.7V | 10 | |
| Master Clock Input Frequency Range | fMCLK_EXT | 1 | 10 | MHz | DVDD < 2.7V | 10 | |
| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | 55 | % | 10 | ||
| Internal Master Clock Frequency | fMCLK_INT | 3.3 | 6.6 | MHz | CLK_SEL[1] = 1 | 10 | |
| Internal Temperature Sensor Temperature Measurement Accuracy (printed ±5 °C) | TAcc | -5 | 5 | °C | See Section 5.1.2, Internal Temperature Sensor | 11 | |
| Thermal Resistance, 20-Lead TSSOP | θJA | 44 | °C/W | 11 |
CAD (KiCad official)
- Symbol:
MCP3561RT-E - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mcp3561rt-e-etched.step/mcp3561rt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3561rt-e.step/mcp3561rt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (116 pp, sha256
a8989732e1be11cc, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP3561RT-E/ST. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP3561RT-E/NC