main
Ray mcp3561rt-e-st: renamed from mcp3561rt-e, the part it was built from (MCP3561RT-E/ST); family listed fea5b78

MCP3561RT-E/ST

Microchip Tech · Analog To Digital Converters (ADCs) · TSSOP-20

MCP3561RT-E from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVDD power_in Analog supply voltage pin, specified for 2.7V to 3.6V, monitored by the AVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass.
2 AGND power_in Analog ground connection to the internal analog circuitry, to be tied to the same ground as DGND (preferably star connection) and not internally connected to DGND.
3 REFIN- input Inverting differential reference input (VREF-), which must be connected to AGND for single-ended reference applications, with VREF kept within 0.6V to AVDD.
4 REFIN+/OUT bidirectional Non-inverting reference input (VREF+) when VREF_SEL = 0, or the internal 2.4V voltage reference output when VREF_SEL = 1, and should be bypassed to AGND with 0.1 µF and 10 µF ceramic capacitors.
5 CH0 input Analog input 0, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V.
6 CH1 input Analog input 1, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V.
7 NC unconnected Not connected on the MCP3561 TSSOP package (CH2 on the MCP3562/MCP3564 variants).
8 NC unconnected Not connected on the MCP3561 TSSOP package (CH3 on the MCP3562/MCP3564 variants).
9 NC unconnected Not connected on the MCP3561 TSSOP package (CH4 on the MCP3564 variant).
10 NC unconnected Not connected on the MCP3561 TSSOP package (CH5 on the MCP3564 variant).
11 NC unconnected Not connected on the MCP3561 TSSOP package (CH6 on the MCP3564 variant).
12 NC unconnected Not connected on the MCP3561 TSSOP package (CH7 on the MCP3564 variant).
13 CS input SPI chip select, Schmitt-triggered; a falling edge starts a communication, a rising edge ends it, and no communication can occur while it is logic high.
14 SCK input SPI serial clock input, Schmitt-triggered, with a maximum clock of 20 MHz; data are latched on the rising edge and clocked out on the falling edge in SPI modes 0,0 and 1,1.
15 SDI input SPI data input, Schmitt-triggered; when CS is logic low, data are clocked in on the rising edge of SCK.
16 SDO tri_state SPI data output, clocked out on the falling edge of SCK, which stays high-impedance when CS is logic high and during write or Fast command periods after the command byte.
17 IRQ/MDAT output Interrupt output by default, or modulator data output when IRQ_MODE[1] = 1; when in High-Z mode an external pull-up of about 100-200 kΩ to DVDD is required.
18 MCLK bidirectional Master clock input for the ADC or analog master clock (AMCLK) output, selected by CLK_SEL[1:0] in CONFIG0, with a typical clock frequency of 4.9152 MHz.
19 DGND power_in Digital ground connection to the internal digital circuitry, which must be connected externally to the same ground as AGND as it is not internally connected to AGND.
20 DVDD power_in Digital supply voltage, specified for 1.8V to 3.6V and monitored by the DVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-20
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) DVDD, AVDD -0.3 4 V 5
Digital Inputs and Outputs w.r.t. DGND (max printed as DVDD + 0.3V) -0.3 V 5
Analog Inputs w.r.t. AGND (max printed as AVDD + 0.3V) -0.3 V 5
Current at Input Pins -5 5 mA 5
Current at Output and Supply Pins -20 20 mA 5
Storage Temperature -65 150 °C 5
Ambient Temperature with Power Applied -65 125 °C 5
Soldering Temperature of Leads 300 °C 10 seconds 5
Maximum Junction Temperature (TJ) TJ 150 °C 5
ESD on All Pins (HBM) 6 kV 5
Specified Temperature Range TA -40 125 °C 11
Operating Temperature Range TA -40 125 °C 11
Analog Operating Voltage AVDD 2.7 3.6 V 6
Digital Operating Voltage (max printed as AVDD + 0.1 V) DVDD 1.8 V DVDD ≤ 3.6V 6
Analog Operating Current AIDD 0.56 0.81 mA BOOST[1:0] = 00, 0.5x 6
Analog Operating Current AIDD 0.69 0.96 mA BOOST[1:0] = 01, 0.66x 6
Analog Operating Current AIDD 0.93 1.3 mA BOOST[1:0] = 10, 1x 6
Analog Operating Current AIDD 1.65 2.2 mA BOOST[1:0] = 11, 2x 6
Analog Operating Current AIDD 0.96 mA BOOST[1:0] = 00, 0.5x, VREF = 2.4V internal 6
Analog Operating Current AIDD 1.2 mA BOOST[1:0] = 01, 0.66x, VREF = 2.4V internal 6
Analog Operating Current AIDD 1.6 mA BOOST[1:0] = 10, 1x, VREF = 2.4V internal 6
Analog Operating Current AIDD 2.5 mA BOOST[1:0] = 11, 2x, VREF = 2.4V internal 6
Digital Operating Current DIDD 0.25 0.37 mA (Note 8) 6
Analog Partial Shutdown Current AIDDS_PS 22 µA CONFIG0 = 0x00 6
Digital Partial Shutdown Current DIDDS_PS 17 µA CONFIG0 = 0x00 6
Analog Full Shutdown Current AIDDS_FS 0.4 µA CONFIG0 = 0x00 with Full-Shutdown Fast-CMD 6
Digital Full Shutdown Current DIDDS_FS 2 µA CONFIG0 = 0x00 with Full-Shutdown Fast-CMD 6
Analog Input Leakage Current During ADC Shutdown ILI_A -10 10 nA 7
Internal VREF Absolute Voltage (min/max printed as -2% / +2%; typ printed in V) IVREF -2 2.4 2 % VREF_SEL = 1, TA = +25°C only 7
Internal VREF Temperature Coefficient TCREFE 15 40 ppm/°C TA = -40°C to +125°C, Extended Temperature Range 7
Internal VREF Temperature Coefficient TCREFI 9 40 ppm/°C TA = -40°C to +85°C, Industrial Temperature Range 7
Voltage Reference Buffer Short Circuit Current IREF_SC 8 mA REFIN+/OUT shorted to AGND, VREF_SEL = 1, (Note 9) 7
Reference Voltage Range (VREF+-VREF-), max printed as AVDD VREF 0.6 V VREF_SEL = 0 8
Resolution 24 Bits OSR ≥ 256 (Note 1) 8
Gain Error GE -3 3 % (Note 6) 8
Gain Error Temperature Coefficient GE_DRIFT 0.5 2 ppm/°C GAIN: 1x, 2x, 4x (Note 2) 8
Gain Error Temperature Coefficient GE_DRIFT 1 4 ppm/°C GAIN: 8x (Note 2) 8
Gain Error Temperature Coefficient GE_DRIFT 2 8 ppm/°C GAIN: 0.33x, 16x (Note 2) 8
Integral Nonlinearity (Note 7) INL -10 10 ppm FSR GAIN = 0.33x (Note 2) 8
Integral Nonlinearity (Note 7) INL -7 7 ppm FSR GAIN = 1x (Note 2) 8
Integral Nonlinearity (Note 7) INL -20 20 ppm FSR GAIN = 8x (Note 2) 8
Integral Nonlinearity (Note 7) INL -32 32 ppm FSR GAIN = 16x (Note 2) 8
Signal-to-Noise and Distortion Ratio SINAD 105.8 106.7 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Signal-to-Noise and Distortion Ratio SINAD 98.1 99.4 dB AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Signal-to-Noise Ratio SNR 106.7 107.2 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Signal-to-Noise Ratio SNR 98.5 99.8 dBc AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Total Harmonic Distortion THD -116 -111 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C, includes the first 10 harmonics (Note 2) 9
Total Harmonic Distortion THD -110 -105 dB AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C, includes the first 10 harmonics (Note 2) 9
Spurious-Free Dynamic Range SFDR 110 120 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 9
Spurious-Free Dynamic Range SFDR 108 113 dBc AVDD = DVDD = 3.3V, VREF = 2.4V internal, bypass capacitor 0.1 µF and TA = +25°C (Note 2) 9
Data Transfer Time to DR (Data Ready) tDODR 50 ns 10
Modulator Output Valid from AMCLK High tDOMDAT 100 ns 2.7V ≤ DVDD ≤ 3.6V 10
Master Clock Input Frequency Range fMCLK_EXT 1 20 MHz DVDD ≥ 2.7V 10
Master Clock Input Frequency Range fMCLK_EXT 1 10 MHz DVDD < 2.7V 10
Master Clock Input Duty Cycle fMCLK_DUTY 45 55 % 10
Internal Master Clock Frequency fMCLK_INT 3.3 6.6 MHz CLK_SEL[1] = 1 10
Internal Temperature Sensor Temperature Measurement Accuracy (printed ±5 °C) TAcc -5 5 °C See Section 5.1.2, Internal Temperature Sensor 11
Thermal Resistance, 20-Lead TSSOP θJA 44 °C/W 11

CAD (KiCad official)

  • Symbol: MCP3561RT-E
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: mcp3561rt-e-etched.step / mcp3561rt-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3561rt-e.step / mcp3561rt-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (116 pp, sha256 a8989732e1be11cc, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP3561RT-E/ST. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP3561RT-E/NC