main
Ray
Publish 0.1.1
c8de48e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277
{
"slug": "mcp3561rt-e-st",
"version": "0.1.1",
"type": "component",
"description": "Microchip Tech Analog To Digital Converters (ADCs), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"data converters",
"mcp3561rt-e",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mcp3561rt-e.kicad_sym",
"mcp3561rt-e.kicad_mod",
"mcp3561rt-e.glb",
"mcp3561rt-e.step",
"mcp3561rt-e.lbr",
"docs/hero.png",
"docs/mcp3561rt-e-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mcp3561rt-e-hero.glb",
"mcp3561rt-e-hero.overlay.json",
"mcp3561rt-e-etched.glb",
"mcp3561rt-e-etched.step",
"mcp3561rt-e-st-hero.glb",
"mcp3561rt-e-st-hero.overlay.json"
],
"component": {
"mpn": "MCP3561RT-E/ST",
"manufacturer": "Microchip Tech",
"package": "TSSOP-20",
"pin_count": 20,
"category": "Data Converters",
"subcategory": "Analog To Digital Converters (ADCs)",
"datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf",
"parts": {
"symbol": "mcp3561rt-e.kicad_sym",
"footprint": "mcp3561rt-e.kicad_mod",
"model_3d": "mcp3561rt-e-st-hero.glb",
"model_3d_plain": "mcp3561rt-e-etched.glb",
"model_3d_step": "mcp3561rt-e-etched.step",
"model_3d_step_plain": "mcp3561rt-e.step",
"lbr": "mcp3561rt-e.lbr"
},
"distributor_links": {
"lcsc": "C1518045"
},
"distributor_check": {
"checked_at": "2026-10-30T22:37:10Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "AVDD",
"type": "power_in",
"description": "Analog supply voltage pin, specified for 2.7V to 3.6V, monitored by the AVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass."
},
{
"number": "2",
"name": "AGND",
"type": "power_in",
"description": "Analog ground connection to the internal analog circuitry, to be tied to the same ground as DGND (preferably star connection) and not internally connected to DGND."
},
{
"number": "3",
"name": "REFIN-",
"type": "input",
"description": "Inverting differential reference input (VREF-), which must be connected to AGND for single-ended reference applications, with VREF kept within 0.6V to AVDD."
},
{
"number": "4",
"name": "REFIN+/OUT",
"type": "bidirectional",
"description": "Non-inverting reference input (VREF+) when VREF_SEL = 0, or the internal 2.4V voltage reference output when VREF_SEL = 1, and should be bypassed to AGND with 0.1 µF and 10 µF ceramic capacitors."
},
{
"number": "5",
"name": "CH0",
"type": "input",
"description": "Analog input 0, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V."
},
{
"number": "6",
"name": "CH1",
"type": "input",
"description": "Analog input 1, routed through the multiplexer to VIN+ or VIN-, with the absolute pin voltage required to stay between AGND - 0.1V and VDD + 0.1V."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH2 on the MCP3562/MCP3564 variants)."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH3 on the MCP3562/MCP3564 variants)."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH4 on the MCP3564 variant)."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH5 on the MCP3564 variant)."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH6 on the MCP3564 variant)."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "Not connected on the MCP3561 TSSOP package (CH7 on the MCP3564 variant)."
},
{
"number": "13",
"name": "CS",
"type": "input",
"description": "SPI chip select, Schmitt-triggered; a falling edge starts a communication, a rising edge ends it, and no communication can occur while it is logic high."
},
{
"number": "14",
"name": "SCK",
"type": "input",
"description": "SPI serial clock input, Schmitt-triggered, with a maximum clock of 20 MHz; data are latched on the rising edge and clocked out on the falling edge in SPI modes 0,0 and 1,1."
},
{
"number": "15",
"name": "SDI",
"type": "input",
"description": "SPI data input, Schmitt-triggered; when CS is logic low, data are clocked in on the rising edge of SCK."
},
{
"number": "16",
"name": "SDO",
"type": "tri_state",
"description": "SPI data output, clocked out on the falling edge of SCK, which stays high-impedance when CS is logic high and during write or Fast command periods after the command byte."
},
{
"number": "17",
"name": "IRQ/MDAT",
"type": "output",
"description": "Interrupt output by default, or modulator data output when IRQ_MODE[1] = 1; when in High-Z mode an external pull-up of about 100-200 kΩ to DVDD is required."
},
{
"number": "18",
"name": "MCLK",
"type": "bidirectional",
"description": "Master clock input for the ADC or analog master clock (AMCLK) output, selected by CLK_SEL[1:0] in CONFIG0, with a typical clock frequency of 4.9152 MHz."
},
{
"number": "19",
"name": "DGND",
"type": "power_in",
"description": "Digital ground connection to the internal digital circuitry, which must be connected externally to the same ground as AGND as it is not internally connected to AGND."
},
{
"number": "20",
"name": "DVDD",
"type": "power_in",
"description": "Digital supply voltage, specified for 1.8V to 3.6V and monitored by the DVDD POR circuit, with a recommended 10 µF ceramic in parallel with a 0.1 µF ceramic bypass."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The NC pin numbers come from a column-aligned Table 3-1 whose text extraction was ambiguous. I assig; Only 17 of 116 pages were supplied. Pin types for REFIN+/OUT (bidirectional), MCLK (bidirectional) a; The Exposed Thermal Pad (EP) listed in Table 3-1 is only on the UQFN package and is not present on t",
"1/20 pins cited to the wrong page (name found elsewhere): ['19:DGND@p32']"
],
"pages_sent": 17,
"cost_usd": 0.108,
"at": "2026-10-30T22:36:49"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf",
"pages": 116,
"sha256": "a8989732e1be11cc",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 20,
"described": 20,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mcp3561rt-e.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mcp3561rt-e-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ff521b63cbf40bb3ac30c81637c0e7e974bd0fd59099ebd7d2d9161b217c5fb6",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"family": {
"base": "MCP3561RT-E",
"siblings": [
"MCP3561RT-E/NC"
],
"old_slug": "mcp3561rt-e",
"note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
}
},
"visibility": "public"
}