main
History Download
Ray Publish 0.1.1 172cd00

MCP3464T-E

Microchip Tech · Analog To Digital Converters (ADCs) · QFN-20-EP(3x3)

MCP3464T-E from Microchip Tech, in a QFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REFIN- input Inverting differential reference input (VREF-); for single-ended reference use it must be connected directly to AGND, and 0.6 V ≤ VREF ≤ AVDD must be respected at all times.
2 REFIN+ input Noninverting differential reference input (VREF+); decouple with 0.1 µF and 10 µF ceramic capacitors to AGND, and keep 0.6 V ≤ VREF ≤ AVDD.
3 CH0 input Analog input channel 0, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
4 CH1 input Analog input channel 1, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
5 CH2 input Analog input channel 2, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
6 CH3 input Analog input channel 3, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
7 CH4 input Analog input channel 4, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
8 CH5 input Analog input channel 5, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
9 CH6 input Analog input channel 6, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
10 CH7 input Analog input channel 7, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V.
11 CS input SPI chip select (Schmitt-triggered): a falling edge starts a communication and a rising edge ends it, and no communication is possible while the pin is high.
12 SCK input SPI serial clock input (Schmitt-triggered) with a maximum rate of 20 MHz; data are clocked in on the SCK rising edge and out on the falling edge, supporting SPI Mode 0,0 and 1,1.
13 SDI input SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and then write data, latched on the SCK rising edge.
14 SDO tri_state SPI serial data output, clocked out on the SCK falling edge; it remains high-impedance when CS is high and during write or Fast command periods after the COMMAND byte.
15 IRQ/MDAT output Configurable as interrupt output (IRQ) or modulator bitstream output (MDAT) via IRQ_MODE[1]; when High-Z is selected, an external pull-up resistor to DVDD is required.
16 MCLK bidirectional Master clock input (external clock 1-20 MHz for DVDD ≥ 2.7 V, typical 4.9152 MHz) or AMCLK clock output, depending on the CLK_SEL[1:0] setting.
17 DGND power_in Digital ground; it must be connected to the same ground as AGND, preferably in a star connection, because it is not connected internally to AGND.
18 DVDD power_in Digital supply pin; the voltage must be kept between 1.8 V and AVDD + 0.1 V (DVDD ≤ 3.6 V), and 10 µF and 0.1 µF ceramic bypass capacitors are recommended.
19 AVDD power_in Analog supply pin; the voltage must be kept between 2.7 V and 3.6 V, with 10 µF and 0.1 µF ceramic bypass capacitors recommended.
20 AGND power_in Analog ground; it must be connected to the same ground as DGND, preferably in a star connection, and it is the substrate bias but not connected internally to DGND.
21 EP power_in Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or left floating if necessary.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20-EP(3x3)
Category ADC/DAC/Data Conversion
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage, Analog AVDD 2.7 3.6 V 6
Operating Voltage, Digital DVDD 1.8 V DVDD ≤ 3.6V 6
Operating Current, Analog AIDD 0.56 0.81 mA BOOST[1:0] = 00, 0.5x 6
Operating Current, Analog AIDD 0.69 0.96 mA BOOST[1:0] = 01, 0.66x 6
Operating Current, Analog AIDD 0.93 1.3 mA BOOST[1:0] = 10, 1x 6
Operating Current, Analog AIDD 1.65 2.2 mA BOOST[1:0] = 11, 2x 6
Operating Current, Digital DIDD 0.25 0.37 mA Note 8 6
Analog Partial Shutdown Current AIDDS_PS 22 µA 6
Digital Partial Shutdown Current DIDDS_PS 158 µA 6
Analog Full Shutdown Current AIDDS_FS 0.83 µA CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) 6
Analog Full Shutdown Current AIDDS_FS 1.1 µA CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode 6
Digital Full Shutdown Current DIDDS_FS 2.4 µA CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) 6
Digital Full Shutdown Current DIDDS_FS 5 µA CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode 6
Reference Voltage Range (VREF+, VREF-) VREF 0.6 V 7
Resolution 16 Bits 7
Gain Error GE -3 3 % Note 6 7
Gain Error Temperature Coefficient GE_DRIFT 0.5 2 ppm/oC GAIN: 1x, 2x, 4x (Note 2) 7
Gain Error Temperature Coefficient GE_DRIFT 1 4 ppm/oC GAIN: 8x (Note 2) 7
Gain Error Temperature Coefficient GE_DRIFT 2 8 ppm/oC GAIN: 0.33x, 16x (Note 2) 7
Integral Nonlinearity INL -10 10 ppm FSR GAIN = 0.33 (Note 2) 8
Integral Nonlinearity INL -7 7 ppm FSR GAIN = 1 (Note 2) 8
Integral Nonlinearity INL 10 ppm FSR GAIN = 4 (Note 2) 8
Integral Nonlinearity INL -20 20 ppm FSR GAIN = 8 (Note 2) 8
Integral Nonlinearity INL -32 32 ppm FSR GAIN = 16 (Note 2) 8
Signal-to-Noise and Distortion Ratio SINAD 96.9 97.2 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 8
Signal-to-Noise Ratio SNR 97 97.3 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 8
Total Harmonic Distortion THD -116 -110 dB AVDD = DVDD =VREF = 3.3V and TA = +25°C. Includes the first 10 harmonics (Note 2) 8
Spurious-Free Dynamic Range SFDR 110 120 dBc AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) 8
Time delay between sampling channels TDLY_SCAN 0 512 DMCLK periods 9
Time interval between scan cycles TTIMER_SCAN 0 1.67772e+07 DMCLK periods 9
Data Ready Pulse High Time TDRH 16 DMCLK periods 9
Data Transfer Time to DR (Data Ready) tDODR 50 ns 9
Modulator Output Valid from AMCLK High tDOMDAT 100 ns 2.7V ≤ DVDD ≤ 3.6V 9
Modulator Output Valid from AMCLK High tDOMDAT 200 ns 1.8V ≤ DVDD ≤ 2.7V 9
Master Clock, Input Frequency Range (external) fMCLK_EXT 1 20 MHz DVDD ≥ 2.7V 9
Master Clock, Input Frequency Range (external) fMCLK_EXT 1 10 MHz DVDD < 2.7V 9
Master Clock Input Duty Cycle fMCLK_DUTY 45 55 % 9
Internal Master Clock Frequency fMCLK_INT 3.3 6.6 MHz CLK_SEL[1] = 1 9
Internal Temperature Sensor Temperature Measurement Accuracy TACC -5 5 °C See Section 5.1.2 “Internal Temperature Sensor” for accuracy calculation 9
Operating Temperature Range TA -40 125 °C 10
DVDD, AVDD supply voltage -0.3 4 V 5
Digital Inputs and Outputs w.r.t. DGND -0.3 V 5
Current at Input Pins -5 5 mA 5
Current at Output and Supply Pins -20 20 mA 5
Storage Temperature -65 150 °C 5
Ambient Temperature with Power Applied -65 125 °C 5
Soldering Temperature of Leads (10 seconds) 300 °C 5
Maximum Junction Temperature TJ 150 °C 5
ESD on the Analog Inputs (HBM) 6 kV 5
ESD on All Other Pins (HBM) 6 kV 5
Digital Input Leakage Current ILI_D 1 µA Pins configured as inputs or high-impedance outputs 11
Serial Clock Frequency (2.7V to 3.6V DVDD) fSCK 20 MHz 10
Output Valid from SCK Low (2.7V to 3.6V DVDD) tDO 25 ns 10
Output Disable Time (2.7V to 3.6V DVDD) tDIS 25 ns Measured with 1.5 mA pull-up current source on SDO pin 10
Serial Clock Frequency (1.8V to 2.7V DVDD) fSCK 10 MHz 11
Output Valid from SCK Low (1.8V to 2.7V DVDD) tDO 50 ns 11
Output Disable Time (1.8V to 2.7V DVDD) tDIS 50 ns Measured with 1.5 mA pull-up current source on SDO pin 11
Thermal Resistance, 20-Lead UQFN JA 50 °C/W 10

CAD (KiCad official)

  • Symbol: MCP3464T-E
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm
  • 3D model: QFN-20-EP(3x3), generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp3464t-e-nc-etched.step / mcp3464t-e-nc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3464t-e-nc.step / mcp3464t-e-nc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (108 pp, sha256 c83ec3033af8ff79, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF