3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP3464T-E
Microchip Tech · Analog To Digital Converters (ADCs) · QFN-20-EP(3x3)
MCP3464T-E from Microchip Tech, in a QFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFIN- | input | Inverting differential reference input (VREF-); for single-ended reference use it must be connected directly to AGND, and 0.6 V ≤ VREF ≤ AVDD must be respected at all times. |
| 2 | REFIN+ | input | Noninverting differential reference input (VREF+); decouple with 0.1 µF and 10 µF ceramic capacitors to AGND, and keep 0.6 V ≤ VREF ≤ AVDD. |
| 3 | CH0 | input | Analog input channel 0, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 4 | CH1 | input | Analog input channel 1, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 5 | CH2 | input | Analog input channel 2, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 6 | CH3 | input | Analog input channel 3, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 7 | CH4 | input | Analog input channel 4, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 8 | CH5 | input | Analog input channel 5, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 9 | CH6 | input | Analog input channel 6, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 10 | CH7 | input | Analog input channel 7, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |
| 11 | CS | input | SPI chip select (Schmitt-triggered): a falling edge starts a communication and a rising edge ends it, and no communication is possible while the pin is high. |
| 12 | SCK | input | SPI serial clock input (Schmitt-triggered) with a maximum rate of 20 MHz; data are clocked in on the SCK rising edge and out on the falling edge, supporting SPI Mode 0,0 and 1,1. |
| 13 | SDI | input | SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and then write data, latched on the SCK rising edge. |
| 14 | SDO | tri_state | SPI serial data output, clocked out on the SCK falling edge; it remains high-impedance when CS is high and during write or Fast command periods after the COMMAND byte. |
| 15 | IRQ/MDAT | output | Configurable as interrupt output (IRQ) or modulator bitstream output (MDAT) via IRQ_MODE[1]; when High-Z is selected, an external pull-up resistor to DVDD is required. |
| 16 | MCLK | bidirectional | Master clock input (external clock 1-20 MHz for DVDD ≥ 2.7 V, typical 4.9152 MHz) or AMCLK clock output, depending on the CLK_SEL[1:0] setting. |
| 17 | DGND | power_in | Digital ground; it must be connected to the same ground as AGND, preferably in a star connection, because it is not connected internally to AGND. |
| 18 | DVDD | power_in | Digital supply pin; the voltage must be kept between 1.8 V and AVDD + 0.1 V (DVDD ≤ 3.6 V), and 10 µF and 0.1 µF ceramic bypass capacitors are recommended. |
| 19 | AVDD | power_in | Analog supply pin; the voltage must be kept between 2.7 V and 3.6 V, with 10 µF and 0.1 µF ceramic bypass capacitors recommended. |
| 20 | AGND | power_in | Analog ground; it must be connected to the same ground as DGND, preferably in a star connection, and it is the substrate bias but not connected internally to DGND. |
| 21 | EP | power_in | Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or left floating if necessary. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-20-EP(3x3) |
| Category | ADC/DAC/Data Conversion |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage, Analog | AVDD | 2.7 | 3.6 | V | 6 | ||
| Operating Voltage, Digital | DVDD | 1.8 | V | DVDD ≤ 3.6V | 6 | ||
| Operating Current, Analog | AIDD | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 | |
| Operating Current, Analog | AIDD | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 | |
| Operating Current, Analog | AIDD | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 | |
| Operating Current, Analog | AIDD | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | |
| Operating Current, Digital | DIDD | 0.25 | 0.37 | mA | Note 8 | 6 | |
| Analog Partial Shutdown Current | AIDDS_PS | 22 | µA | 6 | |||
| Digital Partial Shutdown Current | DIDDS_PS | 158 | µA | 6 | |||
| Analog Full Shutdown Current | AIDDS_FS | 0.83 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Analog Full Shutdown Current | AIDDS_FS | 1.1 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 2.4 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | ||
| Digital Full Shutdown Current | DIDDS_FS | 5 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | ||
| Reference Voltage Range (VREF+, VREF-) | VREF | 0.6 | V | 7 | |||
| Resolution | 16 | Bits | 7 | ||||
| Gain Error | GE | -3 | 3 | % | Note 6 | 7 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 0.5 | 2 | ppm/oC | GAIN: 1x, 2x, 4x (Note 2) | 7 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 1 | 4 | ppm/oC | GAIN: 8x (Note 2) | 7 | |
| Gain Error Temperature Coefficient | GE_DRIFT | 2 | 8 | ppm/oC | GAIN: 0.33x, 16x (Note 2) | 7 | |
| Integral Nonlinearity | INL | -10 | 10 | ppm FSR | GAIN = 0.33 (Note 2) | 8 | |
| Integral Nonlinearity | INL | -7 | 7 | ppm FSR | GAIN = 1 (Note 2) | 8 | |
| Integral Nonlinearity | INL | 10 | ppm FSR | GAIN = 4 (Note 2) | 8 | ||
| Integral Nonlinearity | INL | -20 | 20 | ppm FSR | GAIN = 8 (Note 2) | 8 | |
| Integral Nonlinearity | INL | -32 | 32 | ppm FSR | GAIN = 16 (Note 2) | 8 | |
| Signal-to-Noise and Distortion Ratio | SINAD | 96.9 | 97.2 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Signal-to-Noise Ratio | SNR | 97 | 97.3 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Total Harmonic Distortion | THD | -116 | -110 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C. Includes the first 10 harmonics (Note 2) | 8 | |
| Spurious-Free Dynamic Range | SFDR | 110 | 120 | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | |
| Time delay between sampling channels | TDLY_SCAN | 0 | 512 | DMCLK periods | 9 | ||
| Time interval between scan cycles | TTIMER_SCAN | 0 | 1.67772e+07 | DMCLK periods | 9 | ||
| Data Ready Pulse High Time | TDRH | 16 | DMCLK periods | 9 | |||
| Data Transfer Time to DR (Data Ready) | tDODR | 50 | ns | 9 | |||
| Modulator Output Valid from AMCLK High | tDOMDAT | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 9 | ||
| Modulator Output Valid from AMCLK High | tDOMDAT | 200 | ns | 1.8V ≤ DVDD ≤ 2.7V | 9 | ||
| Master Clock, Input Frequency Range (external) | fMCLK_EXT | 1 | 20 | MHz | DVDD ≥ 2.7V | 9 | |
| Master Clock, Input Frequency Range (external) | fMCLK_EXT | 1 | 10 | MHz | DVDD < 2.7V | 9 | |
| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | 55 | % | 9 | ||
| Internal Master Clock Frequency | fMCLK_INT | 3.3 | 6.6 | MHz | CLK_SEL[1] = 1 | 9 | |
| Internal Temperature Sensor Temperature Measurement Accuracy | TACC | -5 | 5 | °C | See Section 5.1.2 “Internal Temperature Sensor” for accuracy calculation | 9 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| DVDD, AVDD supply voltage | -0.3 | 4 | V | 5 | |||
| Digital Inputs and Outputs w.r.t. DGND | -0.3 | V | 5 | ||||
| Current at Input Pins | -5 | 5 | mA | 5 | |||
| Current at Output and Supply Pins | -20 | 20 | mA | 5 | |||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Ambient Temperature with Power Applied | -65 | 125 | °C | 5 | |||
| Soldering Temperature of Leads (10 seconds) | 300 | °C | 5 | ||||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| ESD on the Analog Inputs (HBM) | 6 | kV | 5 | ||||
| ESD on All Other Pins (HBM) | 6 | kV | 5 | ||||
| Digital Input Leakage Current | ILI_D | 1 | µA | Pins configured as inputs or high-impedance outputs | 11 | ||
| Serial Clock Frequency (2.7V to 3.6V DVDD) | fSCK | 20 | MHz | 10 | |||
| Output Valid from SCK Low (2.7V to 3.6V DVDD) | tDO | 25 | ns | 10 | |||
| Output Disable Time (2.7V to 3.6V DVDD) | tDIS | 25 | ns | Measured with 1.5 mA pull-up current source on SDO pin | 10 | ||
| Serial Clock Frequency (1.8V to 2.7V DVDD) | fSCK | 10 | MHz | 11 | |||
| Output Valid from SCK Low (1.8V to 2.7V DVDD) | tDO | 50 | ns | 11 | |||
| Output Disable Time (1.8V to 2.7V DVDD) | tDIS | 50 | ns | Measured with 1.5 mA pull-up current source on SDO pin | 11 | ||
| Thermal Resistance, 20-Lead UQFN | JA | 50 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
MCP3464T-E - Footprint:
Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm - 3D model: QFN-20-EP(3x3), generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp3464t-e-nc-etched.step/mcp3464t-e-nc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3464t-e-nc.step/mcp3464t-e-nc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (108 pp, sha256
c83ec3033af8ff79, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).