← Commit history
Publish 0.1.1
5 files changed
+131−119
README.md+53−54@@ -8,27 +8,27 @@ MCP3464T-E from Microchip Tech, in a QFN-20-EP(3x3). Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | REFIN- | input | Inverting differential reference input (VREF-); for single-ended reference use, it must be connected directly to AGND, and the reference must satisfy 0.6 V ≤ VREF ≤ AVDD. |-| 2 | REFIN+ | input | Noninverting differential reference input (VREF+); the reference voltage must satisfy 0.6 V ≤ VREF ≤ AVDD, and bypass capacitors (0.1 µF and 10 µF ceramic) should be placed between REFIN+ and AGND. |-| 3 | CH0 | input | Analog input 0; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 4 | CH1 | input | Analog input 1; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 5 | CH2 | input | Analog input 2; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 6 | CH3 | input | Analog input 3; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 7 | CH4 | input | Analog input 4; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 8 | CH5 | input | Analog input 5; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 9 | CH6 | input | Analog input 6; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 10 | CH7 | input | Analog input 7; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage. |-| 11 | CS | input | SPI chip select (Schmitt-triggered); a falling edge starts a serial communication and a rising edge terminates it, with no communication possible while high. |-| 12 | SCK | input | SPI serial clock input (Schmitt-triggered), with a maximum SPI clock of 20 MHz; data are latched on the rising edge and output on the falling edge, supporting SPI Mode 0,0 and 1,1. |-| 13 | SDI | input | SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and write data on the rising edge of SCK. |-| 14 | SDO | tri_state | SPI serial data output, clocked out on the falling edge of SCK; it is high-impedance when CS is high and during write or Fast command periods after the COMMAND byte. |-| 15 | IRQ/MDAT | output | Digital output configurable as interrupt (IRQ) or modulator bitstream (MDAT); when used in High-Z inactive mode, an external pull-up resistor to DVDD is required. |-| 16 | MCLK | bidirectional | Master clock pin used as an external MCLK digital input or as the AMCLK digital output depending on CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz. |-| 17 | DGND | power_in | Digital ground for internal digital circuitry; it is not connected internally to AGND and must be connected externally to the same ground as AGND, preferably in a star connection. |-| 18 | DVDD | power_in | Digital supply voltage, specified from 1.8 V to 3.6 V (and no more than AVDD + 0.1 V); bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic. |-| 19 | AVDD | power_in | Analog supply voltage, specified from 2.7 V to 3.6 V; bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic. |-| 20 | AGND | power_in | Analog ground for internal analog circuitry; it is the substrate bias of the die and is not connected internally to DGND, so it must be externally connected to DGND. |-| 21 | EP | power_in | Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or can be left floating if necessary. |+| 1 | REFIN- | input | Inverting differential reference input (VREF-); for single-ended reference use it must be connected directly to AGND, and 0.6 V ≤ VREF ≤ AVDD must be respected at all times. |+| 2 | REFIN+ | input | Noninverting differential reference input (VREF+); decouple with 0.1 µF and 10 µF ceramic capacitors to AGND, and keep 0.6 V ≤ VREF ≤ AVDD. |+| 3 | CH0 | input | Analog input channel 0, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 4 | CH1 | input | Analog input channel 1, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 5 | CH2 | input | Analog input channel 2, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 6 | CH3 | input | Analog input channel 3, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 7 | CH4 | input | Analog input channel 4, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 8 | CH5 | input | Analog input channel 5, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 9 | CH6 | input | Analog input channel 6, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 10 | CH7 | input | Analog input channel 7, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V. |+| 11 | CS | input | SPI chip select (Schmitt-triggered): a falling edge starts a communication and a rising edge ends it, and no communication is possible while the pin is high. |+| 12 | SCK | input | SPI serial clock input (Schmitt-triggered) with a maximum rate of 20 MHz; data are clocked in on the SCK rising edge and out on the falling edge, supporting SPI Mode 0,0 and 1,1. |+| 13 | SDI | input | SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and then write data, latched on the SCK rising edge. |+| 14 | SDO | tri_state | SPI serial data output, clocked out on the SCK falling edge; it remains high-impedance when CS is high and during write or Fast command periods after the COMMAND byte. |+| 15 | IRQ/MDAT | output | Configurable as interrupt output (IRQ) or modulator bitstream output (MDAT) via IRQ_MODE[1]; when High-Z is selected, an external pull-up resistor to DVDD is required. |+| 16 | MCLK | bidirectional | Master clock input (external clock 1-20 MHz for DVDD ≥ 2.7 V, typical 4.9152 MHz) or AMCLK clock output, depending on the CLK_SEL[1:0] setting. |+| 17 | DGND | power_in | Digital ground; it must be connected to the same ground as AGND, preferably in a star connection, because it is not connected internally to AGND. |+| 18 | DVDD | power_in | Digital supply pin; the voltage must be kept between 1.8 V and AVDD + 0.1 V (DVDD ≤ 3.6 V), and 10 µF and 0.1 µF ceramic bypass capacitors are recommended. |+| 19 | AVDD | power_in | Analog supply pin; the voltage must be kept between 2.7 V and 3.6 V, with 10 µF and 0.1 µF ceramic bypass capacitors recommended. |+| 20 | AGND | power_in | Analog ground; it must be connected to the same ground as DGND, preferably in a star connection, and it is the substrate bias but not connected internally to DGND. |+| 21 | EP | power_in | Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or left floating if necessary. | ## Key specifications @@ -45,21 +45,12 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| AVDD, DVDD Supply Voltage (absolute maximum) | | -0.3 | | 4 | V | | 5 |-| Digital Inputs and Outputs w.r.t. DGND | | -0.3 | | | V | Maximum printed as DVDD + 0.3V | 5 |-| Analog Inputs w.r.t. AGND | | -0.3 | | | V | Maximum printed as AVDD + 0.3V | 5 |-| Current at Input Pins | | -5 | | 5 | mA | Printed ±5 mA | 5 |-| Current at Output and Supply Pins | | -20 | | 20 | mA | Printed ±20 mA | 5 |-| Storage Temperature | | -65 | | 150 | °C | | 5 |-| Ambient Temperature with Power Applied | | -65 | | 125 | °C | | 5 |-| Soldering Temperature of Leads (10 seconds) | | | | 300 | °C | 10 seconds | 5 |-| Maximum Junction Temperature (TJ) | TJ | | | 150 | °C | | 5 | | Operating Voltage, Analog | AVDD | 2.7 | | 3.6 | V | | 6 | | Operating Voltage, Digital | DVDD | 1.8 | | | V | DVDD ≤ 3.6V | 6 |-| Operating Current, Analog (BOOST 00, 0.5x) | AIDD | | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 |-| Operating Current, Analog (BOOST 01, 0.66x) | AIDD | | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 |-| Operating Current, Analog (BOOST 10, 1x) | AIDD | | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 |-| Operating Current, Analog (BOOST 11, 2x) | AIDD | | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 |+| Operating Current, Analog | AIDD | | 0.56 | 0.81 | mA | BOOST[1:0] = 00, 0.5x | 6 |+| Operating Current, Analog | AIDD | | 0.69 | 0.96 | mA | BOOST[1:0] = 01, 0.66x | 6 |+| Operating Current, Analog | AIDD | | 0.93 | 1.3 | mA | BOOST[1:0] = 10, 1x | 6 |+| Operating Current, Analog | AIDD | | 1.65 | 2.2 | mA | BOOST[1:0] = 11, 2x | 6 | | Operating Current, Digital | DIDD | | 0.25 | 0.37 | mA | Note 8 | 6 | | Analog Partial Shutdown Current | AIDDS_PS | | | 22 | µA | | 6 | | Digital Partial Shutdown Current | DIDDS_PS | | | 158 | µA | | 6 |@@ -68,8 +59,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Digital Full Shutdown Current | DIDDS_FS | | | 2.4 | µA | CONFIG0 = 0x00, TA = +105°C, MCLK input in Idle mode (Note 2) | 6 | | Digital Full Shutdown Current | DIDDS_FS | | | 5 | µA | CONFIG0 = 0x00, TA = +125°C, MCLK input in Idle mode | 6 | | Reference Voltage Range (VREF+, VREF-) | VREF | 0.6 | | | V | | 7 |-| Resolution | | 16 | | | Bits | Note 1 | 7 |-| Analog Input Leakage Current During ADC Shutdown | ILI_A | -10 | | 10 | nA | | 7 |+| Resolution | | 16 | | | Bits | | 7 | | Gain Error | GE | -3 | | 3 | % | Note 6 | 7 | | Gain Error Temperature Coefficient | GE_DRIFT | | 0.5 | 2 | ppm/oC | GAIN: 1x, 2x, 4x (Note 2) | 7 | | Gain Error Temperature Coefficient | GE_DRIFT | | 1 | 4 | ppm/oC | GAIN: 8x (Note 2) | 7 |@@ -83,26 +73,35 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Signal-to-Noise Ratio | SNR | 97 | 97.3 | | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 | | Total Harmonic Distortion | THD | | -116 | -110 | dB | AVDD = DVDD =VREF = 3.3V and TA = +25°C. Includes the first 10 harmonics (Note 2) | 8 | | Spurious-Free Dynamic Range | SFDR | 110 | 120 | | dBc | AVDD = DVDD =VREF = 3.3V and TA = +25°C (Note 2) | 8 |-| External Master Clock Input Frequency Range | fMCLK_EXT | 1 | | 20 | MHz | DVDD ≥ 2.7V | 9 |-| External Master Clock Input Frequency Range | fMCLK_EXT | 1 | | 10 | MHz | DVDD < 2.7V | 9 |-| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | | 55 | % | | 9 |-| Internal Master Clock Frequency | fMCLK_INT | 3.3 | | 6.6 | MHz | CLK_SEL[1] = 1 | 9 |-| Internal Temperature Sensor Temperature Measurement Accuracy | TACC | -5 | | 5 | °C | See Section 5.1.2 'Internal Temperature Sensor' for accuracy calculation | 9 |-| Input Leakage Current (digital pins) | ILI_D | | | 1 | µA | Pins configured as inputs or high-impedance outputs | 11 |-| Scan Mode Time Delay Between Sampling Channels | TDLY_SCAN | 0 | | 512 | DMCLK periods | Time delay between sampling channels | 9 |-| Scan Mode Time Interval Between Scan Cycles | TTIMER_SCAN | 0 | | 1.67772e+07 | DMCLK periods | Time interval between scan cycles | 9 |-| Data Ready Pulse High Time | TDRH | 16 | | | DMCLK periods | See Figure 5-15 | 9 |+| Time delay between sampling channels | TDLY_SCAN | 0 | | 512 | DMCLK periods | | 9 |+| Time interval between scan cycles | TTIMER_SCAN | 0 | | 1.67772e+07 | DMCLK periods | | 9 |+| Data Ready Pulse High Time | TDRH | 16 | | | DMCLK periods | | 9 | | Data Transfer Time to DR (Data Ready) | tDODR | | | 50 | ns | | 9 | | Modulator Output Valid from AMCLK High | tDOMDAT | | | 100 | ns | 2.7V ≤ DVDD ≤ 3.6V | 9 |-| Operating Temperature Range (Specified) | TA | -40 | | 125 | °C | | 10 |+| Modulator Output Valid from AMCLK High | tDOMDAT | | | 200 | ns | 1.8V ≤ DVDD ≤ 2.7V | 9 |+| Master Clock, Input Frequency Range (external) | fMCLK_EXT | 1 | | 20 | MHz | DVDD ≥ 2.7V | 9 |+| Master Clock, Input Frequency Range (external) | fMCLK_EXT | 1 | | 10 | MHz | DVDD < 2.7V | 9 |+| Master Clock Input Duty Cycle | fMCLK_DUTY | 45 | | 55 | % | | 9 |+| Internal Master Clock Frequency | fMCLK_INT | 3.3 | | 6.6 | MHz | CLK_SEL[1] = 1 | 9 |+| Internal Temperature Sensor Temperature Measurement Accuracy | TACC | -5 | | 5 | °C | See Section 5.1.2 “Internal Temperature Sensor” for accuracy calculation | 9 | | Operating Temperature Range | TA | -40 | | 125 | °C | | 10 |-| Serial Clock Frequency | fSCK | | | 20 | MHz | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| CS Setup Time | tCSS | 25 | | | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| CS Hold Time | tCSH | 50 | | | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| CS Disable Time | tCSD | 50 | | | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| Data Setup Time | tSU | 5 | | | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| Data Hold Time | tHD | 10 | | | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |-| Output Valid from SCK Low | tDO | | | 25 | ns | DVDD = 2.7V to 3.6V, CLOAD = 30 pF | 10 |+| DVDD, AVDD supply voltage | | -0.3 | | 4 | V | | 5 |+| Digital Inputs and Outputs w.r.t. DGND | | -0.3 | | | V | | 5 |+| Current at Input Pins | | -5 | | 5 | mA | | 5 |+| Current at Output and Supply Pins | | -20 | | 20 | mA | | 5 |+| Storage Temperature | | -65 | | 150 | °C | | 5 |+| Ambient Temperature with Power Applied | | -65 | | 125 | °C | | 5 |+| Soldering Temperature of Leads (10 seconds) | | | | 300 | °C | | 5 |+| Maximum Junction Temperature | TJ | | | 150 | °C | | 5 |+| ESD on the Analog Inputs (HBM) | | | | 6 | kV | | 5 |+| ESD on All Other Pins (HBM) | | | | 6 | kV | | 5 |+| Digital Input Leakage Current | ILI_D | | | 1 | µA | Pins configured as inputs or high-impedance outputs | 11 |+| Serial Clock Frequency (2.7V to 3.6V DVDD) | fSCK | | | 20 | MHz | | 10 |+| Output Valid from SCK Low (2.7V to 3.6V DVDD) | tDO | | | 25 | ns | | 10 |+| Output Disable Time (2.7V to 3.6V DVDD) | tDIS | | | 25 | ns | Measured with 1.5 mA pull-up current source on SDO pin | 10 |+| Serial Clock Frequency (1.8V to 2.7V DVDD) | fSCK | | | 10 | MHz | | 11 |+| Output Valid from SCK Low (1.8V to 2.7V DVDD) | tDO | | | 50 | ns | | 11 |+| Output Disable Time (1.8V to 2.7V DVDD) | tDIS | | | 50 | ns | Measured with 1.5 mA pull-up current source on SDO pin | 11 | | Thermal Resistance, 20-Lead UQFN | JA | | 50 | | °C/W | | 10 | ## CAD (KiCad official)@@ -116,7 +115,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf) (108 pp, sha256 `c83ec3033af8ff79`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf) (108 pp, sha256 `c83ec3033af8ff79`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
mcp3464t-e-nc.lbr+14−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <packages> <package name="QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm"> <description>QFN-20-1EP, 3 x 3 mm, 0.4 mm pitch</description>@@ -101,6 +101,7 @@ </packages> <symbols> <symbol name="MCP3464T-E">+ <description>Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/> <wire x1="12.7" y1="15.24" x2="12.7" y2="-15.24" width="0.254" layer="94"/> <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>@@ -132,7 +133,7 @@ </symbols> <devicesets> <deviceset name="MCP3464T-E" prefix="U">- <description></description>+ <description>Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="MCP3464T-E" x="0" y="0"/> </gates>@@ -161,7 +162,17 @@ <connect gate="G$1" pin="SDI" pad="13"/> <connect gate="G$1" pin="SCK" pad="12"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="MCP3464T-E/NC" constant="no"/>+ <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/en/DeviceDoc/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mcp3464t-e-nc" constant="no"/>+ <attribute name="MOUSER_PN" value="579-MCP3464T-E/NC" constant="no"/>+ <attribute name="DIGIKEY_PN" value="MCP3464T-E/NCCT-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C625484" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
mcp3464t-e-nc.step+1−1@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T22:31:14',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T03:34:35',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
package.json+30−30@@ -1,6 +1,6 @@ { "slug": "mcp3464t-e-nc",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-MCP3464T-E/NC" }, "distributor_check": {- "checked_at": "2026-11-12T22:31:22Z",+ "checked_at": "2026-11-13T03:34:50Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MCP3464T-E/NCCT-ND",@@ -70,127 +70,127 @@ "number": "1", "name": "REFIN-", "type": "input",- "description": "Inverting differential reference input (VREF-); for single-ended reference use, it must be connected directly to AGND, and the reference must satisfy 0.6 V ≤ VREF ≤ AVDD."+ "description": "Inverting differential reference input (VREF-); for single-ended reference use it must be connected directly to AGND, and 0.6 V ≤ VREF ≤ AVDD must be respected at all times." }, { "number": "2", "name": "REFIN+", "type": "input",- "description": "Noninverting differential reference input (VREF+); the reference voltage must satisfy 0.6 V ≤ VREF ≤ AVDD, and bypass capacitors (0.1 µF and 10 µF ceramic) should be placed between REFIN+ and AGND."+ "description": "Noninverting differential reference input (VREF+); decouple with 0.1 µF and 10 µF ceramic capacitors to AGND, and keep 0.6 V ≤ VREF ≤ AVDD." }, { "number": "3", "name": "CH0", "type": "input",- "description": "Analog input 0; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 0, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "4", "name": "CH1", "type": "input",- "description": "Analog input 1; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 1, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "5", "name": "CH2", "type": "input",- "description": "Analog input 2; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 2, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "6", "name": "CH3", "type": "input",- "description": "Analog input 3; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 3, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "7", "name": "CH4", "type": "input",- "description": "Analog input 4; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 4, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "8", "name": "CH5", "type": "input",- "description": "Analog input 5; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 5, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "9", "name": "CH6", "type": "input",- "description": "Analog input 6; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 6, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "10", "name": "CH7", "type": "input",- "description": "Analog input 7; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 7, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "11", "name": "CS", "type": "input",- "description": "SPI chip select (Schmitt-triggered); a falling edge starts a serial communication and a rising edge terminates it, with no communication possible while high."+ "description": "SPI chip select (Schmitt-triggered): a falling edge starts a communication and a rising edge ends it, and no communication is possible while the pin is high." }, { "number": "12", "name": "SCK", "type": "input",- "description": "SPI serial clock input (Schmitt-triggered), with a maximum SPI clock of 20 MHz; data are latched on the rising edge and output on the falling edge, supporting SPI Mode 0,0 and 1,1."+ "description": "SPI serial clock input (Schmitt-triggered) with a maximum rate of 20 MHz; data are clocked in on the SCK rising edge and out on the falling edge, supporting SPI Mode 0,0 and 1,1." }, { "number": "13", "name": "SDI", "type": "input",- "description": "SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and write data on the rising edge of SCK."+ "description": "SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and then write data, latched on the SCK rising edge." }, { "number": "14", "name": "SDO", "type": "tri_state",- "description": "SPI serial data output, clocked out on the falling edge of SCK; it is high-impedance when CS is high and during write or Fast command periods after the COMMAND byte."+ "description": "SPI serial data output, clocked out on the SCK falling edge; it remains high-impedance when CS is high and during write or Fast command periods after the COMMAND byte." }, { "number": "15", "name": "IRQ/MDAT", "type": "output",- "description": "Digital output configurable as interrupt (IRQ) or modulator bitstream (MDAT); when used in High-Z inactive mode, an external pull-up resistor to DVDD is required."+ "description": "Configurable as interrupt output (IRQ) or modulator bitstream output (MDAT) via IRQ_MODE[1]; when High-Z is selected, an external pull-up resistor to DVDD is required." }, { "number": "16", "name": "MCLK", "type": "bidirectional",- "description": "Master clock pin used as an external MCLK digital input or as the AMCLK digital output depending on CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz."+ "description": "Master clock input (external clock 1-20 MHz for DVDD ≥ 2.7 V, typical 4.9152 MHz) or AMCLK clock output, depending on the CLK_SEL[1:0] setting." }, { "number": "17", "name": "DGND", "type": "power_in",- "description": "Digital ground for internal digital circuitry; it is not connected internally to AGND and must be connected externally to the same ground as AGND, preferably in a star connection."+ "description": "Digital ground; it must be connected to the same ground as AGND, preferably in a star connection, because it is not connected internally to AGND." }, { "number": "18", "name": "DVDD", "type": "power_in",- "description": "Digital supply voltage, specified from 1.8 V to 3.6 V (and no more than AVDD + 0.1 V); bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic."+ "description": "Digital supply pin; the voltage must be kept between 1.8 V and AVDD + 0.1 V (DVDD ≤ 3.6 V), and 10 µF and 0.1 µF ceramic bypass capacitors are recommended." }, { "number": "19", "name": "AVDD", "type": "power_in",- "description": "Analog supply voltage, specified from 2.7 V to 3.6 V; bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic."+ "description": "Analog supply pin; the voltage must be kept between 2.7 V and 3.6 V, with 10 µF and 0.1 µF ceramic bypass capacitors recommended." }, { "number": "20", "name": "AGND", "type": "power_in",- "description": "Analog ground for internal analog circuitry; it is the substrate bias of the die and is not connected internally to DGND, so it must be externally connected to DGND."+ "description": "Analog ground; it must be connected to the same ground as DGND, preferably in a star connection, and it is the substrate bias but not connected internally to DGND." }, { "number": "21", "name": "EP", "type": "power_in",- "description": "Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or can be left floating if necessary."+ "description": "Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or left floating if necessary." } ], "provenance": {@@ -204,11 +204,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package hint was QFN-20-EP(3x3). The datasheet calls the matching package '20-Lead UQFN (3 mm x 3 mm; Table 3-1 gives UQFN and TSSOP pin numbers side by side. Only the UQFN column (pins 1-21) was used. ; Pin types are KiCad ERC classes inferred from the datasheet text: CH0-CH7 and REFIN± are marked inpu"+ "extractor flagged: The datasheet names this package '20-Lead UQFN (3 mm x 3 mm)' and not QFN-20-EP; the MPN MCP3464T-E ; Pin type for MCLK is bidirectional because the pin is a clock input in external/internal-no-output m; IRQ/MDAT is typed as output, but the datasheet states it can also be placed in High-Z (requiring an " ], "pages_sent": 108,- "cost_usd": 0.588,- "at": "2026-11-12T22:30:56"+ "cost_usd": 0.5904,+ "at": "2026-11-13T03:34:19" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf",@@ -251,8 +251,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "1465a61380dce6e88cfbf2fa8678a120e961c1cf45968901600bf3a64be904f2",- "checked": "2026-11-12",+ "sha256": "b1fbb79eb0d3a4a61d2b0926f4382c38b98af413c7596db1858ae6d6b590c852",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -270,8 +270,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "39a877e8b4eeae992fd76df099cb289b3675f59343c40d8a16fcc53337ebf852",- "checked": "2026-11-12",+ "sha256": "1e46106ba2ddc37cc13a6688fcc542124378fc1b508035ecfb7b6f2e124286e0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+33−31@@ -4,7 +4,7 @@ "slug": "mcp3464t-e-nc", "title": "MCP3464T-E/NC", "brief": "Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-MCP3464T-E/NC" }, "distributor_check": {- "checked_at": "2026-11-12T22:31:22Z",+ "checked_at": "2026-11-13T03:34:50Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MCP3464T-E/NCCT-ND",@@ -53,127 +53,127 @@ "number": "1", "name": "REFIN-", "type": "input",- "description": "Inverting differential reference input (VREF-); for single-ended reference use, it must be connected directly to AGND, and the reference must satisfy 0.6 V ≤ VREF ≤ AVDD."+ "description": "Inverting differential reference input (VREF-); for single-ended reference use it must be connected directly to AGND, and 0.6 V ≤ VREF ≤ AVDD must be respected at all times." }, { "number": "2", "name": "REFIN+", "type": "input",- "description": "Noninverting differential reference input (VREF+); the reference voltage must satisfy 0.6 V ≤ VREF ≤ AVDD, and bypass capacitors (0.1 µF and 10 µF ceramic) should be placed between REFIN+ and AGND."+ "description": "Noninverting differential reference input (VREF+); decouple with 0.1 µF and 10 µF ceramic capacitors to AGND, and keep 0.6 V ≤ VREF ≤ AVDD." }, { "number": "3", "name": "CH0", "type": "input",- "description": "Analog input 0; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 0, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "4", "name": "CH1", "type": "input",- "description": "Analog input 1; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 1, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "5", "name": "CH2", "type": "input",- "description": "Analog input 2; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 2, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "6", "name": "CH3", "type": "input",- "description": "Analog input 3; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 3, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "7", "name": "CH4", "type": "input",- "description": "Analog input 4; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 4, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "8", "name": "CH5", "type": "input",- "description": "Analog input 5; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 5, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "9", "name": "CH6", "type": "input",- "description": "Analog input 6; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 6, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "10", "name": "CH7", "type": "input",- "description": "Analog input 7; analog input pins are specified from AGND - 0.1 V to AVDD + 0.1 V, and any voltage outside this range causes ESD diode leakage."+ "description": "Analog input channel 7, which can be routed to VIN+ or VIN- through the input multiplexer; the absolute voltage on the pin must stay between AGND - 0.1 V and AVDD + 0.1 V." }, { "number": "11", "name": "CS", "type": "input",- "description": "SPI chip select (Schmitt-triggered); a falling edge starts a serial communication and a rising edge terminates it, with no communication possible while high."+ "description": "SPI chip select (Schmitt-triggered): a falling edge starts a communication and a rising edge ends it, and no communication is possible while the pin is high." }, { "number": "12", "name": "SCK", "type": "input",- "description": "SPI serial clock input (Schmitt-triggered), with a maximum SPI clock of 20 MHz; data are latched on the rising edge and output on the falling edge, supporting SPI Mode 0,0 and 1,1."+ "description": "SPI serial clock input (Schmitt-triggered) with a maximum rate of 20 MHz; data are clocked in on the SCK rising edge and out on the falling edge, supporting SPI Mode 0,0 and 1,1." }, { "number": "13", "name": "SDI", "type": "input",- "description": "SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and write data on the rising edge of SCK."+ "description": "SPI serial data input (Schmitt-triggered) that receives the COMMAND byte after CS falls and then write data, latched on the SCK rising edge." }, { "number": "14", "name": "SDO", "type": "tri_state",- "description": "SPI serial data output, clocked out on the falling edge of SCK; it is high-impedance when CS is high and during write or Fast command periods after the COMMAND byte."+ "description": "SPI serial data output, clocked out on the SCK falling edge; it remains high-impedance when CS is high and during write or Fast command periods after the COMMAND byte." }, { "number": "15", "name": "IRQ/MDAT", "type": "output",- "description": "Digital output configurable as interrupt (IRQ) or modulator bitstream (MDAT); when used in High-Z inactive mode, an external pull-up resistor to DVDD is required."+ "description": "Configurable as interrupt output (IRQ) or modulator bitstream output (MDAT) via IRQ_MODE[1]; when High-Z is selected, an external pull-up resistor to DVDD is required." }, { "number": "16", "name": "MCLK", "type": "bidirectional",- "description": "Master clock pin used as an external MCLK digital input or as the AMCLK digital output depending on CLK_SEL[1:0]; the typical clock frequency is 4.9152 MHz."+ "description": "Master clock input (external clock 1-20 MHz for DVDD ≥ 2.7 V, typical 4.9152 MHz) or AMCLK clock output, depending on the CLK_SEL[1:0] setting." }, { "number": "17", "name": "DGND", "type": "power_in",- "description": "Digital ground for internal digital circuitry; it is not connected internally to AGND and must be connected externally to the same ground as AGND, preferably in a star connection."+ "description": "Digital ground; it must be connected to the same ground as AGND, preferably in a star connection, because it is not connected internally to AGND." }, { "number": "18", "name": "DVDD", "type": "power_in",- "description": "Digital supply voltage, specified from 1.8 V to 3.6 V (and no more than AVDD + 0.1 V); bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic."+ "description": "Digital supply pin; the voltage must be kept between 1.8 V and AVDD + 0.1 V (DVDD ≤ 3.6 V), and 10 µF and 0.1 µF ceramic bypass capacitors are recommended." }, { "number": "19", "name": "AVDD", "type": "power_in",- "description": "Analog supply voltage, specified from 2.7 V to 3.6 V; bypass with a 10 µF ceramic in parallel with a 0.1 µF ceramic."+ "description": "Analog supply pin; the voltage must be kept between 2.7 V and 3.6 V, with 10 µF and 0.1 µF ceramic bypass capacitors recommended." }, { "number": "20", "name": "AGND", "type": "power_in",- "description": "Analog ground for internal analog circuitry; it is the substrate bias of the die and is not connected internally to DGND, so it must be externally connected to DGND."+ "description": "Analog ground; it must be connected to the same ground as DGND, preferably in a star connection, and it is the substrate bias but not connected internally to DGND." }, { "number": "21", "name": "EP", "type": "power_in",- "description": "Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or can be left floating if necessary."+ "description": "Exposed thermal pad, internally connected to AGND; it must be connected to the PCB analog ground for optimal accuracy and thermal performance, or left floating if necessary." } ], "provenance": {@@ -187,11 +187,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package hint was QFN-20-EP(3x3). The datasheet calls the matching package '20-Lead UQFN (3 mm x 3 mm; Table 3-1 gives UQFN and TSSOP pin numbers side by side. Only the UQFN column (pins 1-21) was used. ; Pin types are KiCad ERC classes inferred from the datasheet text: CH0-CH7 and REFIN± are marked inpu"+ "extractor flagged: The datasheet names this package '20-Lead UQFN (3 mm x 3 mm)' and not QFN-20-EP; the MPN MCP3464T-E ; Pin type for MCLK is bidirectional because the pin is a clock input in external/internal-no-output m; IRQ/MDAT is typed as output, but the datasheet states it can also be placed in High-Z (requiring an " ], "pages_sent": 108,- "cost_usd": 0.588,- "at": "2026-11-12T22:30:56"+ "cost_usd": 0.5904,+ "at": "2026-11-13T03:34:19" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf",@@ -234,8 +234,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "1465a61380dce6e88cfbf2fa8678a120e961c1cf45968901600bf3a64be904f2",- "checked": "2026-11-12",+ "sha256": "b1fbb79eb0d3a4a61d2b0926f4382c38b98af413c7596db1858ae6d6b590c852",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -253,8 +253,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "39a877e8b4eeae992fd76df099cb289b3675f59343c40d8a16fcc53337ebf852",- "checked": "2026-11-12",+ "sha256": "1e46106ba2ddc37cc13a6688fcc542124378fc1b508035ecfb7b6f2e124286e0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1061,5 +1061,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Analog To Digital Converters (ADCs), QFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }