main
Ray max3243ecdbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 6811e29
{
  "slug": "max3243ecdbr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max3243ecdbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3243ecdbr.kicad_sym",
    "max3243ecdbr.kicad_mod",
    "max3243ecdbr.glb",
    "max3243ecdbr.step",
    "max3243ecdbr.lbr",
    "docs/hero.png",
    "docs/max3243ecdbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "MAX3243ECDBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/max3243e",
    "parts": {
      "symbol": "max3243ecdbr.kicad_sym",
      "footprint": "max3243ecdbr.kicad_mod",
      "model_3d": "max3243ecdbr-etched.glb",
      "model_3d_plain": "max3243ecdbr.glb",
      "model_3d_step": "max3243ecdbr-etched.step",
      "model_3d_step_plain": "max3243ecdbr.step",
      "lbr": "max3243ecdbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671247"
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V."
      },
      {
        "number": "2",
        "name": "C2-",
        "type": "passive",
        "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V."
      },
      {
        "number": "3",
        "name": "V-",
        "type": "power_out",
        "description": "Negative output from charge pump supplying approximately -5 V for RS-232 signal generation."
      },
      {
        "number": "4",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."
      },
      {
        "number": "5",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."
      },
      {
        "number": "6",
        "name": "RIN3",
        "type": "input",
        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."
      },
      {
        "number": "7",
        "name": "RIN4",
        "type": "input",
        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."
      },
      {
        "number": "8",
        "name": "RIN5",
        "type": "input",
        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."
      },
      {
        "number": "9",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."
      },
      {
        "number": "10",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."
      },
      {
        "number": "11",
        "name": "DOUT3",
        "type": "output",
        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."
      },
      {
        "number": "12",
        "name": "DIN3",
        "type": "input",
        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."
      },
      {
        "number": "13",
        "name": "DIN2",
        "type": "input",
        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."
      },
      {
        "number": "14",
        "name": "DIN1",
        "type": "input",
        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."
      },
      {
        "number": "15",
        "name": "ROUT5",
        "type": "output",
        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."
      },
      {
        "number": "16",
        "name": "ROUT4",
        "type": "output",
        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."
      },
      {
        "number": "17",
        "name": "ROUT3",
        "type": "output",
        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."
      },
      {
        "number": "18",
        "name": "ROUT2",
        "type": "output",
        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."
      },
      {
        "number": "19",
        "name": "ROUT1",
        "type": "output",
        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."
      },
      {
        "number": "20",
        "name": "ROUT2B",
        "type": "output",
        "description": "Always-active noninverting receiver output following RIN2 input and remaining operational during auto-powerdown."
      },
      {
        "number": "21",
        "name": "INVALID",
        "type": "output",
        "description": "Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 µs."
      },
      {
        "number": "22",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Auto-powerdown control input; low forces device to 1 µA standby mode with drivers and receivers disabled."
      },
      {
        "number": "23",
        "name": "FORCEON",
        "type": "input",
        "description": "Auto-powerdown control input; low with FORCEOFF high enables automatic powerdown on invalid RS-232 signals."
      },
      {
        "number": "24",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for logic and RS-232 signal levels."
      },
      {
        "number": "26",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input from 3 V to 5.5 V for logic circuits and internal charge pump."
      },
      {
        "number": "27",
        "name": "V+",
        "type": "power_out",
        "description": "Positive output from charge pump supplying approximately +5 V for RS-232 signal generation."
      },
      {
        "number": "28",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 32,
        "cost_usd": 0.3294,
        "at": "2026-09-23T18:19:11"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/max3243e",
        "pages": 32,
        "sha256": "cb5d72a205b7a01b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3243ecdbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3243ecdbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a94ac3253476e8b1b0d60853a39b97f4e39d94b4d54b73af11307890001f53ed",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}