component
MAX3243ECDBR
Public Made by Adomby adom
Texas Instruments RS232 ICs, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
max3243ecdbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+98−18
package.json+56−16@@ -53,13 +53,13 @@ "number": "1", "name": "C2+", "type": "passive",- "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 \u00b5F at 3.3 V or 0.33 \u00b5F at 5 V."+ "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V." }, { "number": "2", "name": "C2-", "type": "passive",- "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 \u00b5F at 3.3 V or 0.33 \u00b5F at 5 V."+ "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V." }, { "number": "3",@@ -71,49 +71,49 @@ "number": "4", "name": "RIN1", "type": "input",- "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 k\u03a9 input impedance."+ "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance." }, { "number": "5", "name": "RIN2", "type": "input",- "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 k\u03a9 input impedance."+ "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance." }, { "number": "6", "name": "RIN3", "type": "input",- "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 k\u03a9 input impedance."+ "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance." }, { "number": "7", "name": "RIN4", "type": "input",- "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 k\u03a9 input impedance."+ "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance." }, { "number": "8", "name": "RIN5", "type": "input",- "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 k\u03a9 input impedance."+ "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance." }, { "number": "9", "name": "DOUT1", "type": "output",- "description": "RS-232 driver output producing \u00b15.0 to \u00b15.4 V into 3 k\u03a9 load with maximum slew rate 30 V/\u03bcs."+ "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs." }, { "number": "10", "name": "DOUT2", "type": "output",- "description": "RS-232 driver output producing \u00b15.0 to \u00b15.4 V into 3 k\u03a9 load with maximum slew rate 30 V/\u03bcs."+ "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs." }, { "number": "11", "name": "DOUT3", "type": "output",- "description": "RS-232 driver output producing \u00b15.0 to \u00b15.4 V into 3 k\u03a9 load with maximum slew rate 30 V/\u03bcs."+ "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs." }, { "number": "12",@@ -173,13 +173,13 @@ "number": "21", "name": "INVALID", "type": "output",- "description": "Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 \u00b5s."+ "description": "Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 µs." }, { "number": "22", "name": "FORCEOFF", "type": "input",- "description": "Auto-powerdown control input; low forces device to 1 \u00b5A standby mode with drivers and receivers disabled."+ "description": "Auto-powerdown control input; low forces device to 1 µA standby mode with drivers and receivers disabled." }, { "number": "23",@@ -191,7 +191,7 @@ "number": "24", "name": "C1-", "type": "passive",- "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 \u00b5F at 3.3 V or 0.047 \u00b5F at 5 V."+ "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V." }, { "number": "25",@@ -215,7 +215,7 @@ "number": "28", "name": "C1+", "type": "passive",- "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 \u00b5F at 3.3 V or 0.047 \u00b5F at 5 V."+ "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V." } ], "provenance": {@@ -250,6 +250,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3243ecdbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3243ecdbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a94ac3253476e8b1b0d60853a39b97f4e39d94b4d54b73af11307890001f53ed",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -235,7 +235,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3243ecdbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3243ecdbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a94ac3253476e8b1b0d60853a39b97f4e39d94b4d54b73af11307890001f53ed",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -283,4 +323,4 @@ "public": true }, "updated_at": "2026-09-28T18:30:25.434Z"-}+}