component
MAX3243ECDBR
Public Made by Adomby adom
Texas Instruments RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMAX3243ECDBR
Texas Instruments · RS232 ICs · SSOP-28-208mil
MAX3243ECDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V. |
| 2 | C2- | passive | Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V. |
| 3 | V- | power_out | Negative output from charge pump supplying approximately -5 V for RS-232 signal generation. |
| 4 | RIN1 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |
| 5 | RIN2 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |
| 6 | RIN3 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |
| 7 | RIN4 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |
| 8 | RIN5 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |
| 9 | DOUT1 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |
| 10 | DOUT2 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |
| 11 | DOUT3 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |
| 12 | DIN3 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |
| 13 | DIN2 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |
| 14 | DIN1 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |
| 15 | ROUT5 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |
| 16 | ROUT4 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |
| 17 | ROUT3 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |
| 18 | ROUT2 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |
| 19 | ROUT1 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |
| 20 | ROUT2B | output | Always-active noninverting receiver output following RIN2 input and remaining operational during auto-powerdown. |
| 21 | INVALID | output | Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 µs. |
| 22 | FORCEOFF | input | Auto-powerdown control input; low forces device to 1 µA standby mode with drivers and receivers disabled. |
| 23 | FORCEON | input | Auto-powerdown control input; low with FORCEOFF high enables automatic powerdown on invalid RS-232 signals. |
| 24 | C1- | passive | Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V. |
| 25 | GND | power_in | Ground reference for logic and RS-232 signal levels. |
| 26 | VCC | power_in | Supply voltage input from 3 V to 5.5 V for logic circuits and internal charge pump. |
| 27 | V+ | power_out | Positive output from charge pump supplying approximately +5 V for RS-232 signal generation. |
| 28 | C1+ | passive | Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
MAX3243ECDBR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
max3243ecdbr-etched.step/max3243ecdbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3243ecdbr.step/max3243ecdbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
cb5d72a205b7a01b, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).