main
Ray Publish 0.1.3 60eab7f
{
  "slug": "max3238eidbr",
  "version": "0.1.3",
  "type": "component",
  "description": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "max3238eidbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3238eidbr.kicad_sym",
    "max3238eidbr.kicad_mod",
    "max3238eidbr.glb",
    "max3238eidbr.step",
    "max3238eidbr.lbr",
    "docs/hero.png",
    "docs/max3238eidbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3238eidbr-hero.glb",
    "max3238eidbr-hero.overlay.json"
  ],
  "component": {
    "mpn": "MAX3238EIDBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",
    "parts": {
      "symbol": "max3238eidbr.kicad_sym",
      "footprint": "max3238eidbr.kicad_mod",
      "model_3d": "max3238eidbr-hero.glb",
      "model_3d_plain": "max3238eidbr.glb",
      "model_3d_step": "max3238eidbr-etched.step",
      "model_3d_step_plain": "max3238eidbr.step",
      "lbr": "max3238eidbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671105",
      "digikey": "296-19817-2-ND",
      "mouser": "595-MAX3238EIDBR"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T22:10:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-19817-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MAX3238EIDBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of charge-pump capacitor C2, connected between C2+ and C2−."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all supply voltages are specified with respect to this network GND."
      },
      {
        "number": "3",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of charge-pump capacitor C2, connected between C2+ and C2−."
      },
      {
        "number": "4",
        "name": "V−",
        "type": "power_out",
        "description": "Charge-pump negative supply output (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4."
      },
      {
        "number": "5",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, output range ±13.2 V, high-impedance when powered off."
      },
      {
        "number": "6",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, output range ±13.2 V, high-impedance when powered off."
      },
      {
        "number": "7",
        "name": "DOUT3",
        "type": "output",
        "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, output range ±13.2 V, high-impedance when powered off."
      },
      {
        "number": "8",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, input range ±25 V, 5 kΩ typical input resistance."
      },
      {
        "number": "9",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, input range ±25 V, 5 kΩ typical input resistance."
      },
      {
        "number": "10",
        "name": "DOUT4",
        "type": "output",
        "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, output range ±13.2 V, high-impedance when powered off."
      },
      {
        "number": "11",
        "name": "RIN3",
        "type": "input",
        "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, input range ±25 V, 5 kΩ typical input resistance."
      },
      {
        "number": "12",
        "name": "DOUT5",
        "type": "output",
        "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, output range ±13.2 V, high-impedance when powered off."
      },
      {
        "number": "13",
        "name": "FORCEON",
        "type": "input",
        "description": "Control input; with FORCEOFF high, FORCEON high disables auto-powerdown plus and FORCEON low enables it, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply)."
      },
      {
        "number": "14",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Control input; low powers off the drivers and charge pump (supply current 1 µA typical), high allows operation, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply)."
      },
      {
        "number": "15",
        "name": "INVALID",
        "type": "output",
        "description": "Valid-data flag, high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."
      },
      {
        "number": "16",
        "name": "ROUT1B",
        "type": "output",
        "description": "Always-active noninverting receiver 1 output that remains active while the device is powered down, VOH min VCC − 0.6 V at −1 mA, VOL max 0.4 V at 1.6 mA."
      },
      {
        "number": "17",
        "name": "DIN5",
        "type": "input",
        "description": "Driver 5 logic input, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply), accepts 5.5 V maximum."
      },
      {
        "number": "18",
        "name": "ROUT3",
        "type": "output",
        "description": "Receiver 3 logic output, high-impedance when FORCEOFF is low, VOH min VCC − 0.6 V at −1 mA, VOL max 0.4 V at 1.6 mA."
      },
      {
        "number": "19",
        "name": "DIN4",
        "type": "input",
        "description": "Driver 4 logic input, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply), accepts 5.5 V maximum."
      },
      {
        "number": "20",
        "name": "ROUT2",
        "type": "output",
        "description": "Receiver 2 logic output, high-impedance when FORCEOFF is low, VOH min VCC − 0.6 V at −1 mA, VOL max 0.4 V at 1.6 mA."
      },
      {
        "number": "21",
        "name": "ROUT1",
        "type": "output",
        "description": "Receiver 1 logic output, high-impedance when FORCEOFF is low, VOH min VCC − 0.6 V at −1 mA, VOL max 0.4 V at 1.6 mA."
      },
      {
        "number": "22",
        "name": "DIN3",
        "type": "input",
        "description": "Driver 3 logic input, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply), accepts 5.5 V maximum."
      },
      {
        "number": "23",
        "name": "DIN2",
        "type": "input",
        "description": "Driver 2 logic input, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply), accepts 5.5 V maximum."
      },
      {
        "number": "24",
        "name": "DIN1",
        "type": "input",
        "description": "Driver 1 logic input, VIL max 0.8 V, VIH min 2 V (3.3 V supply) or 2.4 V (5 V supply), accepts 5.5 V maximum."
      },
      {
        "number": "25",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of charge-pump capacitor C1, connected between C1+ and C1−."
      },
      {
        "number": "26",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 3 V to 5.5 V (abs max 6 V), bypassed with 0.1 µF to GND."
      },
      {
        "number": "27",
        "name": "V+",
        "type": "power_out",
        "description": "Charge-pump positive supply output (about 5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3 (C3 can be connected to VCC or GND)."
      },
      {
        "number": "28",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of charge-pump capacitor C1, connected between C1+ and C1−."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were assigned from the top-view (DB, DW, PW) name sequence on page 1, because the extrac; The DB-package pin list in the top view gives pins 1-4 and 25-28 as power and charge-pump pins. Pin ; The absolute-maximum entry for the V− supply range is printed as '0.3 –7 V' in the extracted text. T",
          "8/28 pins cited to the wrong page (name found elsewhere): ['8:RIN1@p7', '9:RIN2@p7', '11:RIN3@p7', '13:FORCEON@p8']"
        ],
        "pages_sent": 23,
        "cost_usd": 0.1158,
        "at": "2026-11-17T22:10:05"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",
        "pages": 23,
        "sha256": "1d519ae7a9e53f86",
        "source_tier": "mfr",
        "citation": "Texas Instruments datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3238eidbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3238eidbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d96ff6576a9d7b80272c091a1544fa458839edf233d6210b5a273aeb8595ada2",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DB (SSOP-28, DB0028A)",
      "source_page": 20,
      "D": {
        "nom_mm": 10.2,
        "range_mm": [
          9.9,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 5.3,
        "range_mm": [
          5.0,
          5.6
        ]
      },
      "E": {
        "nom_mm": 7.8,
        "range_mm": [
          7.4,
          8.2
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.0,
        "range_mm": [
          null,
          2.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "max3238eidbr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}