main
Ray max3227idbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 55fe567
{
  "slug": "max3227idbr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max3227idbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3227idbr.kicad_sym",
    "max3227idbr.kicad_mod",
    "max3227idbr.glb",
    "max3227idbr.step",
    "max3227idbr.lbr",
    "docs/hero.png",
    "docs/max3227idbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "MAX3227IDBR",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-16-208mil",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/max3227",
    "parts": {
      "symbol": "max3227idbr.kicad_sym",
      "footprint": "max3227idbr.kicad_mod",
      "model_3d": "max3227idbr-etched.glb",
      "model_3d_plain": "max3227idbr.glb",
      "model_3d_step": "max3227idbr-etched.step",
      "model_3d_step_plain": "max3227idbr.step",
      "lbr": "max3227idbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671310"
    },
    "pins": [
      {
        "number": "1",
        "name": "READY",
        "type": "output",
        "description": "Ready to transmit output, active high when V- goes below -3.5 V and charge pump regulates."
      },
      {
        "number": "2",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of voltage-doubler charge-pump capacitor (0.1 µF at 3.3 V, 0.047 µF at 5 V)."
      },
      {
        "number": "3",
        "name": "V+",
        "type": "power_out",
        "description": "Positive supply voltage +2 × VCC generated by charge pump with absolute maximum range -0.3 V to 7 V."
      },
      {
        "number": "4",
        "name": "C1−",
        "type": "passive",
        "description": "Negative terminal of voltage-doubler charge-pump capacitor (0.1 µF nominal)."
      },
      {
        "number": "5",
        "name": "C2+",
        "type": "passive",
        "description": "Positive terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V)."
      },
      {
        "number": "6",
        "name": "C2−",
        "type": "passive",
        "description": "Negative terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.47 µF at 5 V)."
      },
      {
        "number": "7",
        "name": "V−",
        "type": "power_out",
        "description": "Negative supply voltage -2 × VCC generated by charge pump with absolute maximum range 0.3 V to -7 V."
      },
      {
        "number": "8",
        "name": "RIN",
        "type": "input",
        "description": "RS-232 receiver input with ±25 V voltage range and ±15 kV ESD protection (human-body model)."
      },
      {
        "number": "9",
        "name": "ROUT",
        "type": "output",
        "description": "CMOS receiver output with VOH = VCC - 0.1 V (IOH = -1 mA) and VOL = 0.4 V (IOL = 1.6 mA)."
      },
      {
        "number": "10",
        "name": "INVALID",
        "type": "output",
        "description": "Valid signal detector output, active low when RS-232 receiver input is outside the ±2.7 V valid region."
      },
      {
        "number": "11",
        "name": "DIN",
        "type": "input",
        "description": "CMOS driver input with logic thresholds VIL = 0 to 0.8 V and VIH = 2 V to VCC minimum."
      },
      {
        "number": "12",
        "name": "FORCEON",
        "type": "input",
        "description": "Force-on input, active high (2 V to VCC), to keep drivers and receivers active when FORCEOFF is high."
      },
      {
        "number": "13",
        "name": "DOUT",
        "type": "output",
        "description": "RS-232 driver output with voltage range ±5 V to ±5.4 V (3 kΩ load) and 24 to 150 V/µs slew rate."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all power supplies and signal paths."
      },
      {
        "number": "15",
        "name": "VCC",
        "type": "power_in",
        "description": "Single-supply voltage input, 3 V to 5.5 V recommended operating range with -40 to 85°C operating temperature."
      },
      {
        "number": "16",
        "name": "FORCEOFF",
        "type": "input",
        "description": "Force-off input, active low (0 to 0.8 V), to shut down drivers, receivers, and charge pump."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 18,
        "cost_usd": 0.1991,
        "at": "2026-09-24T01:22:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/max3227",
        "pages": 18,
        "sha256": "2924bfcec2478f4d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3227idbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3227idbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "213728f28ce19f1d40d0fc8145bfa89ca411eb8f8550afd66d9090a161d60225",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}