← Commit history
max3227idbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+97−17
package.json+55−15@@ -59,43 +59,43 @@ "number": "2", "name": "C1+", "type": "passive",- "description": "Positive terminal of voltage-doubler charge-pump capacitor (0.1 \u00b5F at 3.3 V, 0.047 \u00b5F at 5 V)."+ "description": "Positive terminal of voltage-doubler charge-pump capacitor (0.1 µF at 3.3 V, 0.047 µF at 5 V)." }, { "number": "3", "name": "V+", "type": "power_out",- "description": "Positive supply voltage +2 \u00d7 VCC generated by charge pump with absolute maximum range -0.3 V to 7 V."+ "description": "Positive supply voltage +2 × VCC generated by charge pump with absolute maximum range -0.3 V to 7 V." }, { "number": "4",- "name": "C1\u2212",+ "name": "C1−", "type": "passive",- "description": "Negative terminal of voltage-doubler charge-pump capacitor (0.1 \u00b5F nominal)."+ "description": "Negative terminal of voltage-doubler charge-pump capacitor (0.1 µF nominal)." }, { "number": "5", "name": "C2+", "type": "passive",- "description": "Positive terminal of inverting charge-pump capacitor (0.1 \u00b5F at 3.3 V, 0.33 \u00b5F at 5 V)."+ "description": "Positive terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V)." }, { "number": "6",- "name": "C2\u2212",+ "name": "C2−", "type": "passive",- "description": "Negative terminal of inverting charge-pump capacitor (0.1 \u00b5F at 3.3 V, 0.47 \u00b5F at 5 V)."+ "description": "Negative terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.47 µF at 5 V)." }, { "number": "7",- "name": "V\u2212",+ "name": "V−", "type": "power_out",- "description": "Negative supply voltage -2 \u00d7 VCC generated by charge pump with absolute maximum range 0.3 V to -7 V."+ "description": "Negative supply voltage -2 × VCC generated by charge pump with absolute maximum range 0.3 V to -7 V." }, { "number": "8", "name": "RIN", "type": "input",- "description": "RS-232 receiver input with \u00b125 V voltage range and \u00b115 kV ESD protection (human-body model)."+ "description": "RS-232 receiver input with ±25 V voltage range and ±15 kV ESD protection (human-body model)." }, { "number": "9",@@ -107,7 +107,7 @@ "number": "10", "name": "INVALID", "type": "output",- "description": "Valid signal detector output, active low when RS-232 receiver input is outside the \u00b12.7 V valid region."+ "description": "Valid signal detector output, active low when RS-232 receiver input is outside the ±2.7 V valid region." }, { "number": "11",@@ -125,7 +125,7 @@ "number": "13", "name": "DOUT", "type": "output",- "description": "RS-232 driver output with voltage range \u00b15 V to \u00b15.4 V (3 k\u03a9 load) and 24 to 150 V/\u00b5s slew rate."+ "description": "RS-232 driver output with voltage range ±5 V to ±5.4 V (3 kΩ load) and 24 to 150 V/µs slew rate." }, { "number": "14",@@ -137,7 +137,7 @@ "number": "15", "name": "VCC", "type": "power_in",- "description": "Single-supply voltage input, 3 V to 5.5 V recommended operating range with -40 to 85\u00b0C operating temperature."+ "description": "Single-supply voltage input, 3 V to 5.5 V recommended operating range with -40 to 85°C operating temperature." }, { "number": "16",@@ -178,6 +178,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3227idbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3227idbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "213728f28ce19f1d40d0fc8145bfa89ca411eb8f8550afd66d9090a161d60225",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -163,7 +163,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3227idbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3227idbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "213728f28ce19f1d40d0fc8145bfa89ca411eb8f8550afd66d9090a161d60225",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -210,4 +250,4 @@ "visibility": { "public": true }-}+}