main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs max3227idbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers max3227idbr: viewers · Ray
max3227idbr-etched.fit.json max3227idbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max3227idbr-etched.glb max3227idbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max3227idbr-etched.step max3227idbr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
max3227idbr.glb Publish 0.1.0 · Ray
max3227idbr.kicad_mod Publish 0.1.0 · Ray
max3227idbr.kicad_sym Publish 0.1.0 · Ray
max3227idbr.lbr Publish 0.1.0 · Ray
max3227idbr.step Publish 0.1.0 · Ray
package.json max3227idbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json max3227idbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/max3227idbr · Ray

MAX3227IDBR

Texas Instruments · RS232 ICs · SSOP-16-208mil

MAX3227IDBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 READY output Ready to transmit output, active high when V- goes below -3.5 V and charge pump regulates.
2 C1+ passive Positive terminal of voltage-doubler charge-pump capacitor (0.1 µF at 3.3 V, 0.047 µF at 5 V).
3 V+ power_out Positive supply voltage +2 × VCC generated by charge pump with absolute maximum range -0.3 V to 7 V.
4 C1− passive Negative terminal of voltage-doubler charge-pump capacitor (0.1 µF nominal).
5 C2+ passive Positive terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.33 µF at 5 V).
6 C2− passive Negative terminal of inverting charge-pump capacitor (0.1 µF at 3.3 V, 0.47 µF at 5 V).
7 V− power_out Negative supply voltage -2 × VCC generated by charge pump with absolute maximum range 0.3 V to -7 V.
8 RIN input RS-232 receiver input with ±25 V voltage range and ±15 kV ESD protection (human-body model).
9 ROUT output CMOS receiver output with VOH = VCC - 0.1 V (IOH = -1 mA) and VOL = 0.4 V (IOL = 1.6 mA).
10 INVALID output Valid signal detector output, active low when RS-232 receiver input is outside the ±2.7 V valid region.
11 DIN input CMOS driver input with logic thresholds VIL = 0 to 0.8 V and VIH = 2 V to VCC minimum.
12 FORCEON input Force-on input, active high (2 V to VCC), to keep drivers and receivers active when FORCEOFF is high.
13 DOUT output RS-232 driver output with voltage range ±5 V to ±5.4 V (3 kΩ load) and 24 to 150 V/µs slew rate.
14 GND power_in Ground reference for all power supplies and signal paths.
15 VCC power_in Single-supply voltage input, 3 V to 5.5 V recommended operating range with -40 to 85°C operating temperature.
16 FORCEOFF input Force-off input, active low (0 to 0.8 V), to shut down drivers, receivers, and charge pump.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-208mil
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: MAX3227IDBR
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: max3227idbr-etched.step / max3227idbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3227idbr.step / max3227idbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (18 pp, sha256 2924bfcec2478f4d, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF