Generated by kicad-footprint-generator · KiCad file format 20260206
MAX232IN
Texas Instruments · RS232 ICs · PDIP-16
MAX232IN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which is 1 µF in the typical operating circuit. |
| 2 | VS+ | power_out | Positive charge-pump output for the storage capacitor only; absolute maximum range is VCC - 0.3 V to 15 V. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which is 1 µF in the typical operating circuit. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | VS- | power_out | Negative charge-pump output for the storage capacitor only; absolute maximum range is -0.3 V to -15 V. |
| 7 | T2OUT | output | RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited. |
| 8 | R2IN | input | RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V. |
| 9 | R2OUT | output | Logic data output to the UART; output high is at least 3.5 V at IOH = -1 mA and output low is at most 0.4 V at IOL = 3.2 mA. |
| 10 | T2IN | input | Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating. |
| 11 | T1IN | input | Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating. |
| 12 | R1OUT | output | Logic data output to the UART; an open receiver input drives this output high. |
| 13 | R1IN | input | RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V. |
| 14 | T1OUT | output | RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited. |
| 15 | GND | power_in | Ground reference for the device (network GND). |
| 16 | VCC | power_in | Supply voltage input, 4.5 V minimum to 5.5 V maximum with 5 V nominal, connected to an external 5 V supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.3 | 6 | V | 4 | ||
| Positive output supply voltage range | VS+ | 15 | V | 4 | |||
| Negative output supply voltage range | VS- | -15 | -0.3 | V | 4 | ||
| Input voltage range, T1IN, T2IN | VI | -0.3 | V | 4 | |||
| Input voltage range, R1IN, R2IN | VI | -30 | 30 | V | 4 | ||
| Output voltage range, R1OUT, R2OUT | VO | -0.3 | V | 4 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | 0 | 2000 | V | ANSI/ESDA/JEDEC JS-001, all pins | 4 | |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | 0 | 1000 | V | JEDEC JESD22-C101, all pins | 4 | |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 4 | |
| High-level input voltage (T1IN, T2IN) | VIH | 2 | V | 4 | |||
| Low-level input voltage (T1IN, T2IN) | VIL | 0.8 | V | 4 | |||
| Receiver input voltage (R1IN, R2IN) | -30 | 30 | V | 4 | |||
| Operating free-air temperature (MAX232I) | TA | -40 | 85 | °C | MAX232I | 4 | |
| Supply current | ICC | 8 | 10 | mA | VCC = 5.5V, all outputs open, TA = 25°C | 5 | |
| High-level output voltage (T1OUT, T2OUT) | VOH | 5 | 7 | V | RL = 3kΩ to GND | 5 | |
| Low-level output voltage (T1OUT, T2OUT) | VOL | -7 | -5 | V | RL = 3kΩ to GND | 5 | |
| Output resistance (T1OUT, T2OUT) | rO | 300 | Ω | VS+ = VS- = 0, VO = ±2V | 5 | ||
| Short-circuit output current (T1OUT, T2OUT) | IOS | -10 | 10 | mA | VCC = 5.5V, VO = 0V | 5 | |
| Short-circuit input current (T1IN, T2IN) | IIS | 200 | µA | VI = 0 | 5 | ||
| High-level output voltage (R1OUT, R2OUT) | VOH | 3.5 | V | IOH = -1mA | 5 | ||
| Low-level output voltage (R1OUT, R2OUT) | VOL | 0.4 | V | IOL = 3.2mA | 5 | ||
| Receiver positive-going input threshold voltage (R1IN, R2IN) | VIT+ | 1.7 | 2.4 | V | VCC = 5V, TA = 25°C | 5 | |
| Receiver negative-going input threshold voltage (R1IN, R2IN) | VIT- | 0.8 | 1.2 | V | VCC = 5V, TA = 25°C | 5 | |
| Input hysteresis voltage (R1IN, R2IN) | Vhys | 0.2 | 0.5 | 1 | V | VCC = 5V | 5 |
| Receiver input resistance (R1IN, R2IN) | rI | 3 | 5 | 7 | kΩ | VCC = 5V, TA = 25°C | 5 |
| Driver slew rate | SR | 30 | V/μs | RL = 3kΩ to 7kΩ | 5 | ||
| Driver transition region slew rate | SR(t) | 3 | V/μs | 5 | |||
| Data rate | 120 | kbit/s | One TOUT switching | 5 | |||
| Receiver propagation delay time, low-to-high-level output | tPLH | 500 | ns | TTL load | 6 | ||
| Receiver propagation delay time, high-to-low-level output | tPHL | 500 | ns | TTL load | 6 | ||
| Junction-to-ambient thermal resistance (PDIP N) | RθJA | 60.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (PDIP N) | RθJC(top) | 48.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (PDIP N) | RθJB | 40.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter (PDIP N) | ψJT | 27.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter (PDIP N) | ψJB | 40.3 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The VCC voltage should be connected to the same power source used for logic device connected to TIN pins. VCC should be between 4.5V and 5.5V. | 11 |
CAD (KiCad official)
- Symbol:
MAX232IN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
max232in-etched.step/max232in-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max232in.step/max232in.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
01339e34573b5a2b, retrieved 2026-10-16, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).