main
Ray
Publish 0.1.0
39aaa17
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244
{
"slug": "max232in",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments RS232 ICs, PDIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"max232in",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max232in.kicad_sym",
"max232in.kicad_mod",
"max232in.glb",
"max232in.step",
"max232in.lbr",
"docs/hero.png",
"docs/max232in-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max232in-hero.glb",
"max232in-hero.overlay.json",
"max232in-etched.glb"
],
"component": {
"mpn": "MAX232IN",
"manufacturer": "Texas Instruments",
"package": "PDIP-16",
"pin_count": 16,
"category": "Interface",
"subcategory": "RS232 ICs",
"datasheet": "https://www.ti.com/cn/lit/gpn/max232",
"parts": {
"symbol": "max232in.kicad_sym",
"footprint": "max232in.kicad_mod",
"model_3d": "max232in-hero.glb",
"model_3d_plain": "max232in-etched.glb",
"model_3d_step": "max232in-etched.step",
"model_3d_step_plain": "max232in.step",
"lbr": "max232in.lbr"
},
"distributor_links": {
"lcsc": "C353146",
"digikey": "296-6940-5-ND",
"mouser": "595-MAX232IN"
},
"distributor_check": {
"checked_at": "2026-10-16T21:53:59Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-6940-5-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": "595-MAX232IN",
"status": "found",
"lifecycle": "Obsolete"
}
},
"pins": [
{
"number": "1",
"name": "C1+",
"type": "passive",
"description": "Positive lead of the C1 charge-pump capacitor, which is 1 µF in the typical operating circuit."
},
{
"number": "2",
"name": "VS+",
"type": "power_out",
"description": "Positive charge-pump output for the storage capacitor only; absolute maximum range is VCC - 0.3 V to 15 V."
},
{
"number": "3",
"name": "C1-",
"type": "passive",
"description": "Negative lead of the C1 charge-pump capacitor."
},
{
"number": "4",
"name": "C2+",
"type": "passive",
"description": "Positive lead of the C2 charge-pump capacitor, which is 1 µF in the typical operating circuit."
},
{
"number": "5",
"name": "C2-",
"type": "passive",
"description": "Negative lead of the C2 charge-pump capacitor."
},
{
"number": "6",
"name": "VS-",
"type": "power_out",
"description": "Negative charge-pump output for the storage capacitor only; absolute maximum range is -0.3 V to -15 V."
},
{
"number": "7",
"name": "T2OUT",
"type": "output",
"description": "RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited."
},
{
"number": "8",
"name": "R2IN",
"type": "input",
"description": "RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V."
},
{
"number": "9",
"name": "R2OUT",
"type": "output",
"description": "Logic data output to the UART; output high is at least 3.5 V at IOH = -1 mA and output low is at most 0.4 V at IOL = 3.2 mA."
},
{
"number": "10",
"name": "T2IN",
"type": "input",
"description": "Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating."
},
{
"number": "11",
"name": "T1IN",
"type": "input",
"description": "Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating."
},
{
"number": "12",
"name": "R1OUT",
"type": "output",
"description": "Logic data output to the UART; an open receiver input drives this output high."
},
{
"number": "13",
"name": "R1IN",
"type": "input",
"description": "RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V."
},
{
"number": "14",
"name": "T1OUT",
"type": "output",
"description": "RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited."
},
{
"number": "15",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device (network GND)."
},
{
"number": "16",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input, 4.5 V minimum to 5.5 V maximum with 5 V nominal, connected to an external 5 V supply."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 12 (R1OUT) is shown in the top-view pin diagram (page 3) but is missing from the Table 4-1 Pin F; The datasheet lists VS+ and VS- as type 'O' (output). Mapped to KiCad power_out since they are charg; The datasheet gives no type for C1+, C1-, C2+, C2- (shown as '—'). Mapped to passive as capacitor te"
],
"pages_sent": 27,
"cost_usd": 0.0917,
"at": "2026-10-16T21:51:25"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/max232",
"pages": 27,
"sha256": "01339e34573b5a2b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max232in.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
19.177,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",
"checked": "2026-10-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max232in-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "body on z = 0, through-hole leads below",
"extents_mm": [
7.874,
19.177,
6.98
],
"zmin_mm": -3.3,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "1c96901fe9015dbd97d164daba355a27667a09d82e85ff8a951e3d88ca8d5885",
"checked": "2026-10-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}