main
History Download
Ray Publish 0.1.0 39aaa17

MAX232IN

Texas Instruments · RS232 ICs · PDIP-16

MAX232IN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor, which is 1 µF in the typical operating circuit.
2 VS+ power_out Positive charge-pump output for the storage capacitor only; absolute maximum range is VCC - 0.3 V to 15 V.
3 C1- passive Negative lead of the C1 charge-pump capacitor.
4 C2+ passive Positive lead of the C2 charge-pump capacitor, which is 1 µF in the typical operating circuit.
5 C2- passive Negative lead of the C2 charge-pump capacitor.
6 VS- power_out Negative charge-pump output for the storage capacitor only; absolute maximum range is -0.3 V to -15 V.
7 T2OUT output RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited.
8 R2IN input RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V.
9 R2OUT output Logic data output to the UART; output high is at least 3.5 V at IOH = -1 mA and output low is at most 0.4 V at IOL = 3.2 mA.
10 T2IN input Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating.
11 T1IN input Logic data input from the UART, with VIH minimum 2 V and VIL maximum 0.8 V; internal pull-up keeps the input high when floating.
12 R1OUT output Logic data output to the UART; an open receiver input drives this output high.
13 R1IN input RS232 line data input from the remote RS232 system, accepting ±30 V with a typical threshold of 1.3 V and typical hysteresis of 0.5 V.
14 T1OUT output RS232 line data output to the remote RS232 system; output is protected against shorts to ground and short-circuit duration is unlimited.
15 GND power_in Ground reference for the device (network GND).
16 VCC power_in Supply voltage input, 4.5 V minimum to 5.5 V maximum with 5 V nominal, connected to an external 5 V supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.3 6 V 4
Positive output supply voltage range VS+ 15 V 4
Negative output supply voltage range VS- -15 -0.3 V 4
Input voltage range, T1IN, T2IN VI -0.3 V 4
Input voltage range, R1IN, R2IN VI -30 30 V 4
Output voltage range, R1OUT, R2OUT VO -0.3 V 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Electrostatic discharge, human body model (HBM) V(ESD) 0 2000 V ANSI/ESDA/JEDEC JS-001, all pins 4
Electrostatic discharge, charged device model (CDM) V(ESD) 0 1000 V JEDEC JESD22-C101, all pins 4
Supply voltage VCC 4.5 5 5.5 V 4
High-level input voltage (T1IN, T2IN) VIH 2 V 4
Low-level input voltage (T1IN, T2IN) VIL 0.8 V 4
Receiver input voltage (R1IN, R2IN) -30 30 V 4
Operating free-air temperature (MAX232I) TA -40 85 °C MAX232I 4
Supply current ICC 8 10 mA VCC = 5.5V, all outputs open, TA = 25°C 5
High-level output voltage (T1OUT, T2OUT) VOH 5 7 V RL = 3kΩ to GND 5
Low-level output voltage (T1OUT, T2OUT) VOL -7 -5 V RL = 3kΩ to GND 5
Output resistance (T1OUT, T2OUT) rO 300 Ω VS+ = VS- = 0, VO = ±2V 5
Short-circuit output current (T1OUT, T2OUT) IOS -10 10 mA VCC = 5.5V, VO = 0V 5
Short-circuit input current (T1IN, T2IN) IIS 200 µA VI = 0 5
High-level output voltage (R1OUT, R2OUT) VOH 3.5 V IOH = -1mA 5
Low-level output voltage (R1OUT, R2OUT) VOL 0.4 V IOL = 3.2mA 5
Receiver positive-going input threshold voltage (R1IN, R2IN) VIT+ 1.7 2.4 V VCC = 5V, TA = 25°C 5
Receiver negative-going input threshold voltage (R1IN, R2IN) VIT- 0.8 1.2 V VCC = 5V, TA = 25°C 5
Input hysteresis voltage (R1IN, R2IN) Vhys 0.2 0.5 1 V VCC = 5V 5
Receiver input resistance (R1IN, R2IN) rI 3 5 7 kΩ VCC = 5V, TA = 25°C 5
Driver slew rate SR 30 V/μs RL = 3kΩ to 7kΩ 5
Driver transition region slew rate SR(t) 3 V/μs 5
Data rate 120 kbit/s One TOUT switching 5
Receiver propagation delay time, low-to-high-level output tPLH 500 ns TTL load 6
Receiver propagation delay time, high-to-low-level output tPHL 500 ns TTL load 6
Junction-to-ambient thermal resistance (PDIP N) RθJA 60.6 °C/W 4
Junction-to-case (top) thermal resistance (PDIP N) RθJC(top) 48.1 °C/W 4
Junction-to-board thermal resistance (PDIP N) RθJB 40.6 °C/W 4
Junction-to-top characterization parameter (PDIP N) ψJT 27.5 °C/W 4
Junction-to-board characterization parameter (PDIP N) ψJB 40.3 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin The VCC voltage should be connected to the same power source used for logic device connected to TIN pins. VCC should be between 4.5V and 5.5V. 11

CAD (KiCad official)

  • Symbol: MAX232IN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: PDIP-16 (KiCad packages3D, STEP)
  • 3D model files: max232in-etched.step / max232in-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max232in.step / max232in.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 01339e34573b5a2b, retrieved 2026-10-16, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF