main
Ray
Initial commit: component/m95m02-drmn6tp
f0a7844
M95M02-DRMN6TP
STMicroelectronics · EEPROM · SOP-8
M95M02-DRMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{S} | input | Active-low chip select; driving low selects the device (Active power mode) and enables communication; driving high deselects the device and forces Q to high impedance. |
| 2 | Q | output | Serial data output; data shifted out MSB first on the falling edge of C; held at high impedance when S is high or during Hold condition. |
| 3 | ~{W} | input | Active-low write protect input; when driven low with SRWD=1 in the Status register, places the device in Hardware Protected mode, freezing the BP1/BP0 bits; must be held stable during all Write instructions. |
| 4 | VSS | power_in | Ground; reference potential for all signals including the VCC supply voltage. |
| 5 | D | input | Serial data input; receives instructions, addresses, and write data MSB first, latched on the rising edge of serial clock C. |
| 6 | C | input | Serial clock input; instructions, addresses, and data on D are latched on the rising edge; Q changes from the falling edge; supports SPI modes CPOL=0/CPHA=0 and CPOL=1/CPHA=1 up to 5 MHz. |
| 7 | ~{HOLD} | input | Active-low hold input; when driven low while S is low and C is already low, pauses serial communication without deselecting the device; Q goes high impedance during the Hold condition. |
| 8 | VCC | power_in | Supply voltage; 1.8 to 5.5 V (M95M02-DR) or 1.7 to 5.5 V (M95M02-DF); must remain stable and valid throughout all operations including the internal write cycle tW (max 10 ms). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95M02-DRMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95m02-drmn6tp-etched.step/m95m02-drmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m02-drmn6tp.step/m95m02-drmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (47 pp, sha256
e629e6b6552aea55, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95M02-DRMN6TP
**STMicroelectronics** · EEPROM · SOP-8
M95M02-DRMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{S} | input | Active-low chip select; driving low selects the device (Active power mode) and enables communication; driving high deselects the device and forces Q to high impedance. |
| 2 | Q | output | Serial data output; data shifted out MSB first on the falling edge of C; held at high impedance when S is high or during Hold condition. |
| 3 | ~{W} | input | Active-low write protect input; when driven low with SRWD=1 in the Status register, places the device in Hardware Protected mode, freezing the BP1/BP0 bits; must be held stable during all Write instructions. |
| 4 | VSS | power_in | Ground; reference potential for all signals including the VCC supply voltage. |
| 5 | D | input | Serial data input; receives instructions, addresses, and write data MSB first, latched on the rising edge of serial clock C. |
| 6 | C | input | Serial clock input; instructions, addresses, and data on D are latched on the rising edge; Q changes from the falling edge; supports SPI modes CPOL=0/CPHA=0 and CPOL=1/CPHA=1 up to 5 MHz. |
| 7 | ~{HOLD} | input | Active-low hold input; when driven low while S is low and C is already low, pauses serial communication without deselecting the device; Q goes high impedance during the Hold condition. |
| 8 | VCC | power_in | Supply voltage; 1.8 to 5.5 V (M95M02-DR) or 1.7 to 5.5 V (M95M02-DF); must remain stable and valid throughout all operations including the internal write cycle tW (max 10 ms). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M95M02-DRMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `m95m02-drmn6tp-etched.step` / `m95m02-drmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95m02-drmn6tp.step` / `m95m02-drmn6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907490582519808) (47 pp, sha256 `e629e6b6552aea55`, retrieved 2026-09-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95m02-drmn6tp-datasheet.pdf)